Search Results
For OD For OD |
|---|
For Groove Diameter For Groove Diameter |
|---|
Material Material |
|---|
|
Ring OD Ring OD |
|---|
Ring Thickness Ring Thickness |
|---|
|
|
For Groove Width For Groove Width |
|---|
|
|
Thrust Load Capacity Thrust Load Capacity |
|---|
|
Minimum Hardness Minimum Hardness |
|---|
|
E-Style Side-Mount External Retaining Rings Included E-Style Side-Mount ExternalRetaining Rings Included |
|---|
Container Features Container Features |
|---|
|
Low-Clearance Side-Mount External Retaining Rings
Also known as C-style and crescent rings, these rings have a small shoulder to fit in tight spaces. Use a side-mount retaining ring tool (sold separately) to push them into the groove from the side of the shaft. Ring OD is measured with the ring uninstalled.
1060-1090 spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments, while a zinc yellow-chromate plated finish is corrosion resistant in wet environments.
15-7 PH stainless steel rings are high strength with good corrosion resistance. Rings are passivated for added protection against corrosion.
DIN 1.4122 stainless steel rings withstand wear caused by abrasion, similar to 400 series stainless steel. Rings are passivated for added protection against corrosion.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
For technical drawings and 3-D models, click on a part number.
Inch
For Groove | Ring | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For OD | Dia. | Wd. | OD | Thick. | Min. Hardness | Thrust Load Capacity, lbs. | Magnetic Properties | Specifications Met | Pkg. Qty. | Pkg. | |
Black-Phosphate 1060-1090 Spring Steel | |||||||||||
| 1/8" | 0.106" | 0.02" | 0.165" | 0.015" | Not Rated | 80 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 000000 |
| 5/32" | 0.135" | 0.02" | 0.205" | 0.015" | Not Rated | 100 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 0000 |
| 3/16" | 0.165" | 0.02" | 0.244" | 0.015" | Not Rated | 130 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 0000 |
| 7/32" | 0.193" | 0.029" | 0.275" | 0.025" | Rockwell C47 | 260 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 0000 |
| 15/64" | 0.208" | 0.029" | 0.295" | 0.025" | Rockwell C47 | 280 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 0000 |
| 1/4" | 0.22" | 0.029" | 0.311" | 0.025" | Rockwell C47 | 290 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 00000 |
| 9/32" | 0.247" | 0.029" | 0.346" | 0.025" | Rockwell C47 | 330 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 5/16" | 0.276" | 0.029" | 0.376" | 0.025" | Rockwell C47 | 370 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 3/8" | 0.335" | 0.029" | 0.448" | 0.025" | Rockwell C47 | 440 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 13/32" | 0.364" | 0.029" | 0.486" | 0.025" | Rockwell C47 | 480 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 7/16" | 0.393" | 0.029" | 0.517" | 0.025" | Rockwell C47 | 520 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 1/2" | 0.45" | 0.039" | 0.581" | 0.035" | Rockwell C47 | 840 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 9/16" | 0.507" | 0.039" | 0.653" | 0.035" | Rockwell C47 | 940 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 5/8" | 0.563" | 0.039" | 0.715" | 0.035" | Rockwell C47 | 1,040 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 11/16" | 0.619" | 0.046" | 0.784" | 0.042" | Rockwell C47 | 1,720 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 00000 |
| 3/4" | 0.676" | 0.046" | 0.845" | 0.042" | Rockwell C47 | 1,870 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 13/16" | 0.732" | 0.046" | 0.915" | 0.042" | Rockwell C47 | 2,040 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 7/8" | 0.789" | 0.046" | 0.991" | 0.042" | Rockwell C47 | 2,200 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 15/16" | 0.843" | 0.046" | 1.058" | 0.042" | Rockwell C47 | 2,350 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 1" | 0.9" | 0.046" | 1.13" | 0.042" | Rockwell C47 | 2,510 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 1 1/8" | 1.013" | 0.056" | 1.267" | 0.05" | Rockwell C47 | 3,370 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 1 1/4" | 1.126" | 0.056" | 1.415" | 0.05" | Rockwell C47 | 3,730 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 1 3/8" | 1.237" | 0.056" | 1.555" | 0.05" | Rockwell C47 | 4,110 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 1 1/2" | 1.35" | 0.056" | 1.691" | 0.05" | Rockwell C47 | 4,480 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 1 5/8" | 1.483" | 0.068" | 1.853" | 0.062" | Rockwell C47 | 5,500 | Magnetic | ASME B18.27.2 | 5 | 000000000 | 0000 |
| 1 3/4" | 1.576" | 0.068" | 1.975" | 0.062" | Rockwell C47 | 6,520 | Magnetic | ASME B18.27.2 | 5 | 000000000 | 0000 |
| 2" | 1.8" | 0.068" | 2.257" | 0.062" | Rockwell C47 | 7,410 | Magnetic | ASME B18.27.2 | 5 | 000000000 | 0000 |
Zinc Yellow-Chromate-Plated 1060-1090 Spring Steel | |||||||||||
| 1/8" | 0.106" | 0.02" | 0.165" | 0.015" | Not Rated | 80 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 5/32" | 0.135" | 0.02" | 0.205" | 0.015" | Not Rated | 100 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 0000 |
| 3/16" | 0.165" | 0.02" | 0.244" | 0.015" | Not Rated | 130 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 0000 |
| 7/32" | 0.193" | 0.029" | 0.275" | 0.025" | Rockwell C47 | 260 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 0000 |
| 15/64" | 0.208" | 0.029" | 0.295" | 0.027" | Rockwell C47 | 280 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 1/4" | 0.22" | 0.029" | 0.311" | 0.025" | Rockwell C47 | 290 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 0000 |
| 9/32" | 0.247" | 0.029" | 0.346" | 0.025" | Rockwell C47 | 330 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 0000 |
| 5/16" | 0.276" | 0.029" | 0.376" | 0.025" | Rockwell C47 | 370 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 0000 |
| 3/8" | 0.335" | 0.029" | 0.448" | 0.025" | Rockwell C47 | 440 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 0000 |
| 13/32" | 0.364" | 0.029" | 0.486" | 0.027" | Rockwell C47 | 480 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 7/16" | 0.393" | 0.029" | 0.517" | 0.025" | Rockwell C47 | 520 | Magnetic | ASME B18.27.2 | 100 | 000000000 | 0000 |
| 1/2" | 0.45" | 0.039" | 0.581" | 0.035" | Rockwell C47 | 840 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 9/16" | 0.507" | 0.039" | 0.653" | 0.035" | Rockwell C47 | 940 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 5/8" | 0.563" | 0.039" | 0.715" | 0.035" | Rockwell C47 | 1,040 | Magnetic | ASME B18.27.2 | 50 | 000000000 | 0000 |
| 11/16" | 0.619" | 0.046" | 0.784" | 0.042" | Rockwell C47 | 1,720 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 3/4" | 0.676" | 0.046" | 0.845" | 0.042" | Rockwell C47 | 1,870 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 13/16" | 0.732" | 0.046" | 0.915" | 0.042" | Rockwell C47 | 2,040 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 7/8" | 0.789" | 0.046" | 0.991" | 0.042" | Rockwell C47 | 2,200 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 15/16" | 0.843" | 0.046" | 1.058" | 0.042" | Rockwell C47 | 2,350 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 1" | 0.9" | 0.046" | 1.13" | 0.042" | Rockwell C47 | 2,510 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 1 1/8" | 1.013" | 0.056" | 1.267" | 0.05" | Rockwell C47 | 3,370 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 1 1/4" | 1.126" | 0.056" | 1.415" | 0.05" | Rockwell C47 | 3,730 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 1 3/8" | 1.237" | 0.056" | 1.555" | 0.05" | Rockwell C47 | 4,110 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 1 1/2" | 1.35" | 0.056" | 1.691" | 0.05" | Rockwell C47 | 4,480 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 1 5/8" | 1.483" | 0.068" | 1.853" | 0.062" | Rockwell C47 | 5,500 | Magnetic | ASME B18.27.2 | 5 | 000000000 | 0000 |
| 1 3/4" | 1.576" | 0.068" | 1.975" | 0.062" | Rockwell C47 | 6,520 | Magnetic | ASME B18.27.2 | 5 | 000000000 | 0000 |
| 2" | 1.8" | 0.068" | 2.257" | 0.062" | Rockwell C47 | 7,410 | Magnetic | ASME B18.27.2 | 5 | 000000000 | 0000 |
15-7 PH Stainless Steel | |||||||||||
| 1/8" | 0.106" | 0.02" | 0.165" | 0.015" | Not Rated | 80 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 5/32" | 0.135" | 0.02" | 0.205" | 0.015" | Not Rated | 100 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 3/16" | 0.165" | 0.02" | 0.244" | 0.015" | Not Rated | 130 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 7/32" | 0.193" | 0.029" | 0.275" | 0.025" | Rockwell C43 | 260 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 15/64" | 0.208" | 0.029" | 0.295" | 0.025" | Rockwell C44 | 280 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 1/4" | 0.22" | 0.029" | 0.311" | 0.025" | Rockwell C43 | 290 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 9/32" | 0.247" | 0.029" | 0.346" | 0.025" | Rockwell C43 | 330 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 5/16" | 0.276" | 0.029" | 0.376" | 0.025" | Rockwell C43 | 370 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 3/8" | 0.335" | 0.029" | 0.448" | 0.025" | Rockwell C43 | 440 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 13/32" | 0.364" | 0.029" | 0.486" | 0.025" | Rockwell C44 | 480 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 7/16" | 0.393" | 0.029" | 0.517" | 0.025" | Rockwell C43 | 520 | Magnetic | ASME B18.27.2 | 25 | 000000000 | 0000 |
| 1/2" | 0.45" | 0.039" | 0.581" | 0.035" | Rockwell C43 | 840 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 9/16" | 0.507" | 0.039" | 0.653" | 0.035" | Rockwell C43 | 940 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 5/8" | 0.563" | 0.039" | 0.715" | 0.035" | Rockwell C43 | 1,040 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 11/16" | 0.619" | 0.046" | 0.784" | 0.042" | Rockwell C43 | 1,720 | Magnetic | ASME B18.27.2 | 10 | 000000000 | 0000 |
| 3/4" | 0.676" | 0.046" | 0.845" | 0.042" | Rockwell C43 | 1,870 | Magnetic | ASME B18.27.2 | 5 | 000000000 | 0000 |
| 13/16" | 0.732" | 0.046" | 0.915" | 0.042" | Rockwell C43 | 2,040 | Magnetic | ASME B18.27.2 | 5 | 000000000 | 0000 |
| 7/8" | 0.789" | 0.046" | 0.991" | 0.042" | Rockwell C43 | 2,200 | Magnetic | ASME B18.27.2 | 5 | 000000000 | 0000 |
| 15/16" | 0.843" | 0.046" | 1.058" | 0.042" | Rockwell C43 | 2,350 | Magnetic | ASME B18.27.2 | 5 | 000000000 | 0000 |
| 1" | 0.9" | 0.046" | 1.13" | 0.042" | Rockwell C43 | 2,510 | Magnetic | ASME B18.27.2 | 1 | 000000000 | 0000 |
| 1 1/8" | 1.013" | 0.056" | 1.267" | 0.05" | Rockwell C43 | 3,370 | Magnetic | ASME B18.27.2 | 1 | 000000000 | 0000 |
| 1 1/4" | 1.126" | 0.056" | 1.415" | 0.05" | Rockwell C43 | 3,730 | Magnetic | ASME B18.27.2 | 1 | 000000000 | 0000 |
| 1 3/8" | 1.237" | 0.056" | 1.555" | 0.05" | Rockwell C44 | 4,110 | Magnetic | ASME B18.27.2 | 1 | 000000000 | 0000 |
| 1 1/2" | 1.35" | 0.056" | 1.691" | 0.05" | Rockwell C43 | 4,480 | Magnetic | ASME B18.27.2 | 1 | 000000000 | 0000 |
| 1 5/8" | 1.483" | 0.068" | 1.853" | 0.062" | Rockwell C44 | 5,500 | Magnetic | ASME B18.27.2 | 1 | 000000000 | 00000 |
| 1 3/4" | 1.576" | 0.068" | 1.975" | 0.062" | Rockwell C44 | 6,520 | Magnetic | ASME B18.27.2 | 1 | 000000000 | 0000 |
| 2" | 1.8" | 0.068" | 2.257" | 0.062" | Rockwell C44 | 7,410 | Magnetic | ASME B18.27.2 | 1 | 000000000 | 00000 |
Metric
For Groove | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For OD, mm | Dia., mm | Wd., mm | OD, mm | Thick., mm | Min. Hardness | Thrust Load Capacity, lbs. | Magnetic Properties | Pkg. Qty. | Pkg. | |
Black-Phosphate 1060-1090 Spring Steel | ||||||||||
| 4 | 3.2 | 0.44 | 5 | 0.4 | Rockwell C48 | 110 | Magnetic | 100 | 000000000 | 00000 |
| 5 | 4 | 0.64 | 6.2 | 0.6 | Rockwell C48 | 240 | Magnetic | 100 | 000000000 | 0000 |
| 6 | 5 | 0.74 | 7.4 | 0.7 | Rockwell C48 | 370 | Magnetic | 100 | 000000000 | 0000 |
| 7 | 6 | 0.85 | 8.6 | 0.8 | Rockwell C48 | 490 | Magnetic | 50 | 000000000 | 0000 |
| 8 | 7 | 0.85 | 10 | 0.8 | Rockwell C48 | 490 | Magnetic | 50 | 000000000 | 0000 |
| 9 | 8 | 1.1 | 11.2 | 1 | Rockwell C48 | 780 | Magnetic | 50 | 000000000 | 0000 |
| 10 | 9 | 1.1 | 12.15 | 1 | Rockwell C48 | 830 | Magnetic | 50 | 000000000 | 0000 |
| 11 | 10 | 1.1 | 13.2 | 1 | Rockwell C48 | 890 | Magnetic | 25 | 000000000 | 0000 |
| 12 | 10.9 | 1.1 | 14.35 | 1 | Rockwell C48 | 940 | Magnetic | 50 | 000000000 | 0000 |
| 13 | 11.8 | 1.1 | 15.4 | 1 | Rockwell C48 | 1,010 | Magnetic | 25 | 000000000 | 0000 |
| 14 | 12.7 | 1.1 | 16.3 | 1 | Rockwell C48 | 1,120 | Magnetic | 25 | 000000000 | 0000 |
| 15 | 13.6 | 1.1 | 17.4 | 1 | Rockwell C48 | 1,230 | Magnetic | 25 | 000000000 | 0000 |
| 16 | 14.5 | 1.1 | 18.5 | 1 | Rockwell C48 | 1,300 | Magnetic | 25 | 000000000 | 0000 |
| 17 | 15.4 | 1.1 | 19.4 | 1 | Rockwell C48 | 1,340 | Magnetic | 10 | 000000000 | 0000 |
| 18 | 16.3 | 1.3 | 20.4 | 1.2 | Rockwell C48 | 1,910 | Magnetic | 25 | 000000000 | 0000 |
| 19 | 17.2 | 1.3 | 21.5 | 1.2 | Rockwell C48 | 2,020 | Magnetic | 10 | 000000000 | 0000 |
| 20 | 18.1 | 1.3 | 22.65 | 1.2 | Rockwell C48 | 2,110 | Magnetic | 25 | 000000000 | 0000 |
| 22 | 19.9 | 1.3 | 25 | 1.2 | Rockwell C48 | 2,240 | Magnetic | 50 | 000000000 | 00000 |
| 25 | 22.6 | 1.3 | 28.3 | 1.2 | Rockwell C48 | 2,580 | Magnetic | 25 | 000000000 | 00000 |
| 26 | 23.5 | 1.3 | 29.4 | 1.2 | Rockwell C48 | 2,690 | Magnetic | 25 | 000000000 | 00000 |
| 40 | 36 | 1.85 | 45 | 1.75 | Rockwell C48 | 6,180 | Magnetic | 5 | 000000000 | 0000 |
15-7 PH Stainless Steel | ||||||||||
| 4 | 3.2 | 0.44 | 5 | 0.4 | Rockwell C44 | 110 | Magnetic | 25 | 000000000 | 00000 |
| 5 | 4 | 0.64 | 6.2 | 0.6 | Rockwell C44 | 240 | Magnetic | 25 | 000000000 | 00000 |
| 14 | 12.7 | 1.1 | 16.3 | 1 | Rockwell C44 | 1,120 | Magnetic | 5 | 000000000 | 0000 |
| 17 | 15.4 | 1.1 | 19.4 | 1 | Rockwell C44 | 1,340 | Magnetic | 5 | 000000000 | 00000 |
DIN 1.4122 Stainless Steel | ||||||||||
| 6 | 5 | 0.74 | 7.4 | 0.7 | Rockwell C47 | 370 | Magnetic | 25 | 000000000 | 0000 |
| 7 | 6 | 0.85 | 8.6 | 0.8 | Rockwell C47 | 490 | Magnetic | 25 | 000000000 | 0000 |
| 8 | 7 | 0.85 | 10 | 0.8 | Rockwell C47 | 490 | Magnetic | 25 | 000000000 | 00000 |
| 9 | 8 | 1.1 | 11.2 | 1 | Rockwell C47 | 780 | Magnetic | 25 | 000000000 | 00000 |
| 10 | 9 | 1.1 | 12.15 | 1 | Rockwell C47 | 830 | Magnetic | 10 | 000000000 | 0000 |
| 11 | 10 | 1.1 | 13.2 | 1 | Rockwell C47 | 890 | Magnetic | 10 | 000000000 | 0000 |
| 12 | 10.9 | 1.1 | 14.35 | 1 | Rockwell C47 | 940 | Magnetic | 10 | 000000000 | 0000 |
| 18 | 16.3 | 1.3 | 20.4 | 1.2 | Rockwell C47 | 1,910 | Magnetic | 5 | 000000000 | 0000 |
Hog Rings for Auto-Feed Pliers
C Style
Compressed Style
These rings come in a strip for less frequent reloading in auto-feed pliers (sold separately). Squeeze them closed for use as sack closures, in tagging applications, and for repairing fences.
Hog Rings
Humped Style
D Style
Squeeze these rings closed for use as sack closures, in tagging applications, and for repairing fences. Use hog ring pliers (sold separately) to close the rings.
18-8 stainless steel rings have good corrosion resistance and may be mildly magnetic. Copper-coated steel rings offer some corrosion resistance.
| Opening Size | Wd. | Wire Dia. | Clinched Dia. | Pkg. Qty. | Pkg. | |
Humped Style | ||||||
|---|---|---|---|---|---|---|
18-8 Stainless Steel | ||||||
| 5/8" | 1 3/16" | 3/32" | 1/2" | 50 | 000000000 | 000000 |
| 3/4" | 1 5/16" | 3/32" | 9/16" | 50 | 000000000 | 00000 |
| 7/8" | 1 1/2" | 3/32" | 9/16" | 50 | 000000000 | 00000 |
Copper-Coated Steel | ||||||
| 5/8" | 1 3/16" | 3/32" | 1/2" | 100 | 000000000 | 0000 |
| 3/4" | 1 5/16" | 3/32" | 9/16" | 100 | 000000000 | 0000 |
| 7/8" | 1 1/2" | 3/32" | 9/16" | 100 | 000000000 | 0000 |
D Style | ||||||
Galvanized Steel | ||||||
| 5/8" | 3/4" | 1/16" | 1/4" | 1,000 | 000000000 | 00000 |
Steel | ||||||
| 1/2" | 13/16" | 3/32" | 3/16" | 100 | 000000000 | 0000 |
Side-Mount External Retaining Ring Assortments
 |  C-Style |
 E-Style |
Also known as E-Style and C-style rings, slide these into the groove from the side of the shaft. They provide a wider shoulder than other external retaining rings for a larger retaining surface. All are magnetic.
Black-phosphate steel retaining rings resist corrosion in dry environments.
| Number of Pieces | Sizes Included | Retaining Ring Style | Container Type | Each | |
Inch | |||||
|---|---|---|---|---|---|
Black-Phosphate Steel | |||||
| 225 | For 7/32" to 3/4" OD | C | Plastic Box | 000000000 | 000000 |
Hog Ring Assortments
Squeeze hog rings closed with the pliers for sack closure, tagging, and repairing fences. Assortment includes pliers for hog rings. Rings are copper-coated steel and resist corrosion in wet environments.
| Number of Pieces | Hog Rings Included | Tools Included | Container Type | Each | |
Copper-Coated Steel | |||||
|---|---|---|---|---|---|
| 400 | 1/2" Opening × 3/32" Dia. (100 Pieces) 5/8" Opening × 3/32" Dia. (100 Pieces) 3/4" Opening × 3/32" Dia. (100 Pieces) 7/8" Opening × 3/32" Dia. (100 Pieces) | Hog Ring Pliers | Plastic Box | 000000000 | 000000 |