A catch grabs and holds the strike plate to keep doors shut.

An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.

Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.

These latches are adjustable; push the ball in and rotate it to adjust force as well as compensate for misalignment.

Magnetic force holds doors closed.

Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.

Doors stay closed with the pressure of rollers against the strike plate.

These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.

Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.

For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.

Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.

Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.

Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers.

For protection against dust, dirt, and washdowns, these locks are IP65 rated.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Designed for use in 1/2" dia. through holes.

A stainless steel shutter blocks rain, snow, and dirt from entering the cylinder where they can cause internal damage.

These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Designed for use in 1/2" dia. through holes.

Made of plastic, these locks are suitable for damp and humid environments.

Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

These locks open with their own unique key as well as a master key.

Open multiple locks with the same key.

The mounting screws on these locks are concealed to prevent tampering.

The mounting screws on these locks are concealed to prevent tampering.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

Choose these locks if you need to open several with the same key.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Choose these locks if you need each one to open with a different key.

With a molded inset grip, the handle remains recessed to stay out of the way.

These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

These latches are IP65 rated for protection against dust, dirt, and washdowns.

Designed for use in 1/2" dia. through holes.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Designed for food-processing and hygienic applications, these corrosion-resistant latches are DGUV tested to meet European regulations for use with food.

With a flat inset grip, the handle is recessed to stay out of the way.

The mounting screws on these latches are concealed to prevent tampering.

Fold the ring handle into the recess to stay out of the way when not in use.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

Raise the handle and it swings smoothly for easy latching and unlatching.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.

Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated.

Secure these latches with a padlock.

These latches use downward compression to pull surfaces together for sealing gasketed doors.

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

Mount these latches on a corner to draw perpendicular surfaces together.

These latches are typically used to secure hoods and covers.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

To prevent accidental opening, these latches have a safety catch.

No need for a strike plate, these latches hook into a lip or notch.

These latches have a safety catch to prevent accidental opening.