Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

Turn the screw on the latch to adjust the gripping force on the strike plate.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

Close and open these grab latches with a push—there's no need for a handle.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

These latches withstand temperatures up to 480° or 570° F.

There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.

To prevent doors from slamming, these latches are hydraulic.

Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.

Keep doors on refrigerators and industrial enclosures closed.

Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.

Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Operate these padlockable latches from either side of the door—there is a handle on both sides.

An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.

A master key opens all of these locks, which also have their own unique keys.

Open each of these locks with a different key.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

Designed for use in 1/2" dia. through holes.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

To prevent internal damage, these locks have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder.

Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.

These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.

Designed for use in 1/2" dia. through holes.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Meet U.S. postal service guidelines for mailbox locks.

These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.

These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Designed for use in 1/4" or 1/2" dia. through holes.

These locks require a hex key to open.

A red indicator on the lock face is visible when unlocked and hidden when locked.

Fold the ring handle into the recess to stay out of the way when not in use.

The mounting screws on these locks are concealed to prevent tampering.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

Open these locks with both a master key and their own unique key.

The mounting screws on these locks are concealed to prevent tampering.

These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

Use these latches with three-point locking systems, such as those on filing cabinet doors.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.

Designed for use in 1/2" dia. through holes.

Raise the handle and it swings smoothly for easy latching and unlatching.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.

Press the button and the handle snaps open; push the handle shut for a secure hold.

These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated.

Similar to locks on a hotel safe, each user sets a new combination.

These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

A safety catch prevents accidental opening.

These latches are typically used to secure hoods and covers.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

A safety catch prevents accidental opening.

Each latch comes with a variety of strike plates for different mounting options.

These latches have a safety catch to prevent accidental opening.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.