We will reply to your message within an hour.
Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.
Designed for use in 1/2" dia. through holes.
Meet U.S. postal service guidelines for mailbox locks.
Made of plastic, these locks are suitable for damp and humid environments.
These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.
These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.
A stainless steel shutter blocks rain, snow, and dirt from entering the cylinder where they can cause internal damage.
Install these locks on cabinet doors and file drawers with a smaller-than-standard diameter through hole.
Designed for smaller-than-standard-diameter through holes, these locks are often used for securing cabinet doors and filing cabinet drawers.
Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
To prevent internal damage, these locks have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder.
Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.
These locks open with their own unique key as well as a master key.
Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.
These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.
Without a keyway, you don't have to worry about these magnetic locks being picked or memorizing combinations. They are water-tight, so they resist snow, dirt, and other contaminants.
Designed for use in 1/4" or 1/2" dia. through holes.
For protection against dust, dirt, and washdowns, these locks are IP65 rated.
Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.
These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
A red indicator on the lock face is visible when unlocked and hidden when locked.
Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.
These locks require a hex key to open.
The mounting screws on these locks are concealed to prevent tampering.
Open multiple locks with the same key.
These locks are IP65 rated for protection against dust, dirt, and washdowns.
Open each of these locks with a different key.
A master key opens all of these locks, which also have their own unique keys.
The attached metal arm rotates to lock cabinet doors and file drawers. These locks are keyed alike, so they’re good for when you need several locks that open with the same key.
In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.
Choose these locks if you need each one to open with a different key.
Open these locks with both a master key and their own unique key.
Raise the handle and it swings smoothly for easy latching and unlatching.
Press the button and the handle snaps open; push the handle shut for a secure hold.
These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.
Fold the ring handle into the recess to stay out of the way when not in use.
With a molded inset grip, the handle remains recessed to stay out of the way.
Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.
These latches are IP65 rated for protection against dust, dirt, and washdowns.
With a finger-grip knob, these latches fit where latches with handles won't.
These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.
Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
The mounting screws on these latches are concealed to prevent tampering.
Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns.
Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.
Use these latches with three-point locking systems, such as those on filing cabinet doors.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers.
These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
With a flat inset grip, the handle is recessed to stay out of the way.
Also known as compression cams, these latches have an adjustable screw instead of a standard cam, so you can easily adjust the latching distance and tension over time. Press the button and the handle pops open; fold the handle into the recess to keep it out of the way and to secure the latch.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use.
These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Set a combination and reset it at any time.
Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.
Similar to locks on a hotel safe, each user sets a new combination.
With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.
Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated.
Secure these latches with a padlock.
These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
Choose these locks if you need to lock multiple drawers with the same key.
To ensure the correct fit on your drawer, these locks include two latch bolts.
With thicker bodies and longer bolts, these locks resist prying to provide more security than other keyed alike deadbolt cabinet door locks.
To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying.
These drawer locks open with their own keys and with a master key.
Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.
Open each of these drawer locks with a different key.
Open multiple cabinet locks with the same key.
Each of these cabinet locks opens with its own key.
Open multiple cabinet locks with their own keys, as well as with a master key.
Choose these locks if you need several locks that open with the same key.
Choose these locks if you need locks that each open with a different key.
These strikes fit most deadbolt-style locks.
A red indicator on the side of these locks is visible when they are open and hidden when they are locked.
Push the bolt into the strike plate to secure doors, gates, and cabinets.
Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.
No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.
Slide the bolt and drop the knob into the notch to secure.
A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.
The spring-loaded bolt stays latched until you pull it back—slide the bolt and drop the knob into the notch to secure.
Bolts are spring-loaded to stay latched until you activate the pull.
Pull the chain-grip to unlatch hard-to-reach doors and panels.
The strike has angled ends so these latches can accept their bolt even when doors become misaligned.
Push the knob to slide the bolt that secures these latches and then press the button to release the bolt.
The mounting screws on these padlockable latches are concealed to prevent tampering.
These padlockable latches are reversible for right- and left-hand mounting.
These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.
A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.
Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.
To prevent tampering, the mounting screws on these latches are concealed.
These padlockable latches are often used on 2" and 3" track to keep garage and other sectional overhead doors closed.
A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.
Choose these L-handle locks if you need several that open with the same key.
Use these latches alone for single-point latching or add latch kits for multiple-point latching and extra holding power.
Use these latches alone for single-point latching, or add latch kits for more holding power.
Choose these locks if you need several that open with the same key.
The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.
Choose these keyed alike locks when you need several that open with the same key.
Choose these keyed alike locks if you need several that open with the same key.
Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors.
Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.
Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.
These latches are adjustable; push the ball in and rotate it to adjust force as well as compensate for misalignment.
A catch grabs and holds the strike plate, so doors stay shut when you push them closed.
Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.
An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.
Turn the screw on the latch to adjust the gripping force on the strike plate.
Close and open these grab latches with a push—there's no need for a handle.
Magnetic force holds doors closed.
Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.
To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.
These latches withstand temperatures up to 480° or 570° F.
Close and open these magnetic latches with a push—there's no need for a handle.
Doors stay closed with the pressure of rollers against the strike plate.
There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.
To prevent doors from slamming, these latches are hydraulic.
These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.
Close and open these roller latches with a push—there's no need for a handle.
These latches snap together to secure doors. They have a return spring to snap tight with a push and release with a pull.
Push in the knob to open these latches.
When not in use, push the knob in so it's flush and out of the way; it pops out with a touch.
To open, push in the knob and pull the tab.
Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers.
An emergency release handle offers a means of escape if the door closes with someone inside an enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.
Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.
When released, the spring-loaded ring handle returns to its recessed position to stay out of the way.
Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.
Keep doors on refrigerators and industrial enclosures closed.
For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.
The low profile means less of the lock is exposed, reducing the potential for damage.
Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.
Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.
Operate these padlockable latches from either side of the door—there is a handle on both sides.
An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.
Snap these latches together to secure doors and use a hex key to open.
Push doors closed and a return spring automatically snaps these locks together to secure them tightly in place. Pull them open with the included two-way key, which is also known as a double-bit key.
Choose this hasp if you need several hasps that open with the same key.
Choose these hasps if you need hasps that each open with a different key.
Turn the padlock eye to fasten these hasps without a padlock.
Install these hasps over a cam lock and secure them with a padlock to increase security on cabinets and chests.
Mount these padlockable eyes to the front of a door and door frame.
Mount these padlockable eyes on the inside edge of a door and door frame.
Mount these hasps around complex curves, angles, and corners that other corner hasps can't reach.
Designed for use with cut-resistant padlocks, these hasps have a padlock shackle protector on the strike plate for added cut and pry resistance.
To prevent accidental opening, these latches have a safety catch.
These latches use downward compression to pull surfaces together for sealing gasketed doors.
A safety catch prevents accidental opening.
These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.
A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.
Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.
These latches are typically used to secure hoods and covers.
Mount these latches on a corner to draw perpendicular surfaces together.
An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.
No need for a strike plate, these latches hook into a lip or notch.
Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.
These latches have a safety catch to prevent accidental opening.
The latch arm is coated with vinyl so it won't scratch surfaces.
Each latch comes with a variety of strike plates for different mounting options.
These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.
Lift and turn the handle 180° to open and close these latches.
Use these L-handle latches to draw lightweight surfaces together.
Draw lightweight surfaces together with these latches.
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.
Use a 5/16" hex key to open and close these locks.
These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.
To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.
Open these locks with a slotted screwdriver.
Open these locks with a Torx driver or the included Torx keys.
Adjust the latching distance to compensate for gasketing and misalignment.
Add a padlock to secure these latches, which reach around corners to pull two surfaces together.
For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.
Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.
Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.
Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.
Lift and turn the handle 180° to open and close this lock.
Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.
Open several draw locks with the same key.
For use on gasketed doors, these latches use downward compression to pull surfaces together.
Choose these cylinders if you need several cylinders that open with the same key.
Choose these cylinders if you need cylinders that each open with a different key.
Choose these cylinders if you need cylinders that each open with a different key and also open with a master key.
Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.
These latches are reversible for right- and left-hand mounting.
Tighten the screw on the strike plate to secure the bar and prevent accidental unlatching.
Latches snap shut when you push the bar in the strike plate to prevent accidental unlatching. Press the button on the strike plate to release the bar.
In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.
To prevent accidental unlatching due to vibration, there's a bushing in the eye.
Turn the handle to keep doors, drawers, and hatches closed.
Hold doors, drawers, and hatches closed with the turn of a handle.
Twist these latches to hold small lightweight doors and panels closed.
Also known as rotary latches, these compensate for door misalignment when closing and then firmly grip the strike bolt for a secure hold.
Add these bars to drawer cabinets without a lock and secure with a padlock.
These locking bars have hinges and swing out of the way for easy access to cabinet drawers.
Choose these locking bars if you need bars that each open with a different key.
Choose these locking bars if you need several bars that open with the same key.
For security, choose a combination from over 2,000 possible five-number combinations.
This lock has a latch bolt to secure doors in the closed position.
Also known as rim lock cylinders, these are for use in locks that are mounted to the door's surface.
Designed to withstand vandalism better than other lock cylinders, these are for use in locks that are mortise mounted into a cutout in the door.
Choose these lock cylinders if you need several lock cylinders that open with the same key.
Choose these lock cylinders if you need lock cylinders that each open with a different key.
Choose these lock cylinders if you want individual lock cylinders or groups of lock cylinders that open with their own key, but also open with a master key.
Maintain security by keeping your door latched as you open it up to 3".
These locks use electromagnetic force to hold double doors closed, often as part of an access-control system.
For use alone or as part of an access-control system, these locks use electromagnetic force to hold single doors closed.
Lock sliding windows in a closed position, or slightly open for ventilation.
Often used on casement windows.
Choose these locks if you need locks that each open with a different key and also open with a master key.
With these locks, users can select any locker that's not being used, create their own combination, and secure their items. Once they open the lock, it automatically resets for the next user.
These locks automatically lock when the locker door is closed.
Close the locker door and turn the dial to lock.
Secure swinging doors in wire and chain link partitions.
Safeguard sliding doors in wire and chain link partitions.
A hidden push-button release on the bottom of these latches retracts the latch bolt; this discourages unwanted entry but allows access to those who know it’s there.
With a key-locking mechanism, these locks provide more security than other gate locks.
In addition to sliding gates, these locks are for use on cantilever and fixed-roller gates.
For use alone or as part of an access-control system, these locks use magnets to hold gates closed.
Push to close and pull up on the latch arm to open these padlockable latches.
These concealed latches snap together—no mounting fasteners required.
Slide these latches into the strike plate to secure bathroom doors.
Hold bathroom doors closed by swinging these latches into a notch in the strike plate.