Made of FDA listed materials, these rigid bellows are suitable for food and beverage applications.

These thick, rigid bellows provide excellent durability.

Suitable for tight spaces, these highly compressible bellows have sealed seams to keep contaminants out.

These fiberglass bellows withstand temperatures up to 450° F—about twice as much as standard breathable round bellows with flange ends. They also protect against flames and sparks.

No need to disassemble equipment—these bellows wrap around moving parts. Sewn seams let them breathe, so they retract quickly in fast-cycling applications.

Secure the cuff ends with hose clamps.

Slide these bellows over square rods and shafts.

Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable, or where cables exit from conduit.

Visually confirm your connection through the inspection window.

These splices can withstand higher temperatures than insulated splices.

Filled with grease, these splices resist moisture and corrosion.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

Able to withstand temperatures up to 900° F, these splices are suitable for use in high-heat applications such as ovens, motors, and light fixtures.

A plastic cover fully insulates these splices.

Join wires in the dirtiest, wet, and harsh environments. These splices meet one of the toughest IP ratings—IP68.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Push stripped wire into each end of these splices to make a connection.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

For use with a compression tool, these splices are color-coded to match compression dies.

Suitable for use underground, these connectors consist of a twist-on wire connector and an abrasion- and moisture-resistant insulator tube.

Twist stripped wires together, insert them into the connector, and then crimp for a dependable connection.

Large enough to be used with a wide range of wire sizes, these connectors can still fit into cramped outlet boxes.

Make a quick, secure wire connection without crimping.

Soft molding over the wings provides a comfortable grip.

Made of porcelain, these connectors can withstand temperatures up to 1200° F.

Tap a main wire or add a finished terminal to the end of a wire.

Taps connect to wires with male quick-disconnect terminals.

Connect one wire to two wires of the same size. When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.

Tap and splice multiple wires together at the same time.