Surface mount with the adhesive back to route low-voltage data and control cable where you can't get inside walls.

Insert and remove cable at any point along the length of this open-top, hook-shaped raceway.

With more than one channel, this raceway allows you to separate power and data wiring to prevent signal interference.

With a top that overhangs the cover, this raceway keeps out rain. It is rated NEMA 3R for protection from liquids and light splashing.

In areas exposed to washdowns, chemicals, and corrosion, install this stainless steel raceway system that has gaskets at the connection points.

Use in areas with light pedestrian traffic.

These cable ramps handle heavy pedestrian and equipment traffic.

Multiple channels let you separate different types of cable and cords.

These cable ramps are strong enough to withstand equipment traffic.

Make tight bends in machine and equipment wiring.

Preventing wear and cracks, these grommets shield the sections of your conduit that rub and bang against nearby components.

Join pieces of conduit.

Visually identify different runs of wire and cable in machine and equipment wiring.

Attach conduit to a knockout in an outlet box or enclosure.

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

Attach conduit and armored cable to a knockout in an outlet box or enclosure.

Even in temperatures as low as -50° F and as high as 220° F, this conduit stays flexible.

Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.

In addition to resisting oil, this conduit resists lubricants and grease.

Join pieces of conduit.

The toughest liquid-tight flexible metal conduit we offer, this resists oil, chemicals, and extreme temperature fluctuations.

Covered with a copper braid, this conduit protects wire and cable from electromagnetic interference (EMI) caused by motors and other equipment.

In addition to continuous-motion applications such as robotics, this conduit is suitable for high-vibration applications.

These fittings seal out liquid when used with continuous-flex liquid-tight plastic conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Visually identify different runs of wire and cable along walls and ceilings with this conduit that has a painted exterior.

Join pieces of conduit.

Also known as electrical metallic tubing (EMT), this conduit has thin walls that easily bend with a conduit bender and can be cut with a hacksaw.

The most corrosion-resistant thin-wall conduit we offer, use this along walls and ceilings in food-processing and chemical plants.

Also known as intermediate metallic conduit (IMC), this is lighter in weight than thick-wall (rigid) steel conduit, yet it has the same strength.

This impact- and crush-resistant conduit is also known as galvanized rigid conduit (GRC).

Join pieces of conduit.

Reduce the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.

Also known as conduit bodies, these ports provide access to wire and cable inside thick-wall (rigid) metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Join pieces of conduit.

Connect different sizes of conduit.

Join pieces of conduit.

Use in food-processing and chemical plants—this is the most corrosion resistant thick-wall conduit we offer.

Also known as conduit bodies, these ports provide access to wire and cable inside PVC conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Join pieces of conduit.

Transition between types of conduit.

Secure threaded plastic conduit fittings to a knockout in an outlet box or enclosure.

This wire duct completely encloses wire and cable.

Faster to install than standard slotted wire duct, attach this to flat, clean surfaces.

The hinged snap-on crossbars open for access at any point along the carrier's length so you can lay in the cable and hose, rather than threading it through.

A more durable construction with a zinc-plated steel frame provides strength for a longer service life than other open cable and hose carriers.

Designed for specific robot models, these kits have all of the parts required to create a cable and hose carrier. Use them to organize and protect cable and hose without obstructing your robot’s movement.

Cut, bend, and connect these wire mesh tray systems to route cable and hose in configurations such as curves, slopes, and tees.

Create a system to route cable and hose by connecting components such as straight trays and tees.

Mount these trolleys to your existing channel to create a cable and hose travel system.

These systems consist of a series of small trolleys that travel on the included wire rope, carrying your cable or hose along with them. Because these systems mount to the side of your crane, they require minimal structural support.