Use in areas with light pedestrian traffic.

Curve these ramps to route cable around bends and corners in indoor areas with heavy pedestrian and equipment traffic.

Multiple channels let you separate different types of cable and cords.

These cable ramps are strong enough to withstand equipment traffic.

Route power, data, and control cable rated up to 600 volts AC/DC.

The triangular shape fits into corners.

With more than one channel, this raceway allows you to separate power and data wiring to prevent signal interference.

This raceway system is also known as wireway and wire trough.

Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.

Make tight bends in machine and equipment wiring.

Preventing wear and cracks, these grommets shield the sections of your conduit that rub and bang against nearby components.

Protect fiber optic cable with this small-diameter conduit.

The spiral design makes this conduit more flexible than abrasion-resistant liquid-tight flexible plastic conduit.

In addition to resisting oil, this conduit resists lubricants and grease.

Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.

Also known as Type B, this conduit is more crush and abrasion resistant than liquid-tight flexible plastic conduit.

In addition to continuous-motion applications such as robotics, this conduit is suitable for high-vibration applications.

Also known as electrical metallic tubing (EMT), this conduit has thin walls that easily bend with a conduit bender and can be cut with a hacksaw.

Visually identify different runs of wire and cable along walls and ceilings with this conduit that has a painted exterior.

The most corrosion-resistant thin-wall conduit we offer, use this along walls and ceilings in food-processing and chemical plants.

Use in food-processing and chemical plants—this is the most corrosion resistant thick-wall conduit we offer.

Join pieces of conduit.

Join pieces of conduit.

Also known as intermediate metallic conduit (IMC), this is lighter in weight than thick-wall (rigid) steel conduit, yet it has the same strength.

Often used as an alternative to cable ties, wire duct guides and organizes short runs of electrical wiring in enclosures, control panels, and machines.

Narrower slots and fingers create more access and routing points than on standard slotted wire duct.

A strip of hook-and-loop creates a strong seal along the entire length of this sleeving, yet it can be opened at any point to access contents. Use it to wrap around wire, cable, or hose without disconnecting them.

Zip this sleeving around wire, cable, or hose that are connected at both ends to quickly bundle them.

Organize and protect the cables on your Universal Robots arm without hindering its movement.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

A slit along the length makes this sleeving easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

This sleeving reflects heat away from contents and withstands temperatures up to 300°F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

The two halves of this sleeving nest into each other, fully enclosing contents. It has interlocking ridges that overlap to keep out dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

This sleeving reflects heat away from contents and withstands temperatures up to 900°F. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility.

This sleeving stretches to fit over items for easy installation, and then tightens around its contents for a secure fit. Choose from multiple colors to organize wire and cable.

Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

With excellent torsional strength, this sleeving withstands the extreme twisting found in robotics. It has impact strength similar to steel yet is lighter than most other sleeving materials. Stretch it to fit over items for easy installation; it tightens around its contents for a secure fit.

Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.

This sleeving withstands temperatures up to 390°F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.

A specially formulated silicone rubber coating allows this sleeving to stretch over items during installation; it then tightens around its contents for a secure fit.

A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.

This sleeving withstands temperatures over 1000°F, such as in refineries.

Unlike fiberglass and silica, this sleeving won't irritate skin, so it's easier to handle. It has a temperature rating of 1100° F or higher.

Tightly braided nylon fibers give this sleeving excellent abrasion resistance. As it wears, the fibers frizz and make the outer wall thicker for improved protection.

Wrap this sleeving around cable, cords and wires to protect them and to form bundles.

Made with a self-extinguishing additive, this sleeving will not produce fumes when exposed to open flame or high temperatures. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Made of neoprene rubber, this sleeving has excellent abrasion resistance. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

Use this general purpose tubing to insulate and protect wire and cable.

This tubing creates a tight seal over irregularly shaped objects.

Access connections more easily than with standard heat-shrink tubing. Make a small slit in this tubing to peel it away.

A flame-retardant additive makes this polyolefin tubing combustion resistant and minimizes the spread of flames.

Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.

Made of PVC, this tubing resists chemicals, oil, and solvents. The adhesive lining creates a water-resistant seal when heated.

Extra-thick walls provide better protection against abrasion and tears than standard moisture-seal tubing, as well as creating a water-resistant seal.

Resistant to diesel fuel, hydraulic fluid, and lubricating oil, this tubing is often used in vehicles.

Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.

Made of woven polyolefin/polyester fabric, this tubing has excellent abrasion resistance so it can be dragged over rough surfaces without damage.

This tubing shrinks down to a quarter of its original ID, so it creates a tight seal over irregularly shaped objects. It withstands up to 500° F.

With thin walls, this tubing shrinks faster than other high-temperature tubing. It withstands up to 500° F.

A layer of conductive cloth protects wire and cable from signal interference caused by nearby equipment and devices.

Organize and route wire and cable in an enclosure—this tubing bundles wires together while allowing them to reach different connection points.

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.

Seal the end of crimped connections, such as motor coils, to protect them from moisture.

Create a permanent seal without applying heat. This tubing is also known as cold-shrink tubing.

The zinc plating on these tray systems offers good corrosion resistance.

These are the most corrosion-resistant tray systems we offer.

Suitable for use in applications where cords are underwater—these grips are rated IP68 for protection from prolonged submersion.

Keep cords from coming loose and seal water out of enclosures in extremely cold labs and storage areas. Thanks to their plastic bushing and rubber O-ring, these grips withstand temperatures as low as -75° F.

Extend your cord’s life while stopping it from coming loose in places that are sanitized with water or steam as hot as 300° F, such as food plants and clean rooms.

Because these grips resist absorbing water, they are less likely to crack or corrode than other types of plastics and metals.

Able to withstand temperatures up to 300° F, these grips are also corrosion- and chemical-resistant.

Vent air from your enclosure to equalize pressure and stop condensation from forming inside while securing cords in wet environments. These polyamide grips are lightweight and resist rusting.

A rubber bushing with an oval slot resists water and provides entry for building cable, which is also known as Romex type NM-B or type UF-B cable.

These 90° elbows absorb less water and are less likely to crack or corrode than other types of plastics and metals.