Keep your hands in a comfortable position so you can apply more force for cutting.

A small grip enables one-handed cutting.

Use the lever to make one-handed cuts with minimal material distortion. Cutter mounts to a workbench for extra stability and ease of use for repeated cuts.

A double hinge provides high cutting force with low gripping pressure.

Cut hard steel wire, nails, and small rivets close to the surface with the wide, flat jaws on these cutters.

Also known as nippers, these cutters have wide, flat jaws that cut steel wire and bolts close to the surface.

Snip wire close against circuit boards and other electronic components without building up electrostatic discharge (ESD).

Shaped like tweezers, these cutters make accurate, flush cuts in small wire without damaging the surface underneath. The grips drain static away from the tips, protecting sensitive components from electrostatic discharge (ESD).

Cut thin, hard wire with these small cutters.

An angled cutting head keeps handles up and out of the way for trimming bolts, chain, and wire against flat surfaces. Smaller than standard bolt cutters, these cutters can be used one-handed in tight spaces.

Handle is angled 30° to keep work in sight and hands clear of the work surface. Blades are flat on one side for close-to-the-surface cuts.

Leverage points on the jaws and handles let you cut through bolts, chains, and rods with 30% less effort than standard bolt cutters.

Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

The cutting head is angled 30° from the handles, so you can cut close to a surface or in a tight space without the handles getting in your way.

Jaws ratchet to increase cutting pressure as you open and close the handles.

Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Produce clean, distortion-free cuts in cable with one-handed operation.

Make flush cuts through fiber-optic cable for clean connections and easy splicing.

Choose these wire cutters for your occasional use.

For use where even minor magnetism can cause major damage, these wire cutters are made of titanium, so they’re completely nonmagnetic.

Snip wire in tight spaces, such as crowded circuit boards, without damaging components nearby.

Capture scraps, such as cut cable ties and wire ends, to prevent them from falling into your equipment or flying and hitting something.

Cut steel, spring steel, and other hard wire without worrying about your wire cutters rusting.

These cutters are stainless steel, which provides excellent corrosion resistance.

The black finish prevents glare that can interfere with precision work under bright light and magnification.

The grips on these cutters drain static from your application, preventing buildup from electrostatic discharge (ESD).

Make cuts easily and comfortably while protecting sensitive equipment from static discharge.

Slice through nickel, titanium, and other hard wire without building up electrostatic discharge (ESD) or rusting out your tool.

Cut and strip wire in tight spaces with the compact tips on these scissors.

Also known as electricians' shears, the back edge of the blade has a file to clean contacts.

After each cut, the jaws spring open to make continuous cutting easy.

Cut through the strong fibers of Kevlar.

An ergonomic handle provides a comfortable grip and protects your knuckles from scrapes.

The rubber handle on this knife provides a more secure and comfortable grip than plastic handle knives.

Knife has a polycarbonate handle with a finger guard.

Useful in tight spots, you insert cable into the front of these strippers. One squeeze strips insulation and pulls it off your cable.

Because you insert wire from the front, you can use this tool in tight spaces.

This kit includes a wire stripper plus blades to strip electrical wire and coaxial cable.

The plier nose on these wire strippers is useful for pulling and looping wire.

Made of aluminum-bronze that is FM approved, these wire strippers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Since you insert wire from the front, these strippers are useful in tight spaces. The insulated handles protect against shock from accidental contact with live electrical circuits.

With just a squeeze, strip and remove outer insulation from your cable.

Strip wire and crimp connectors with one tool.

Small enough to fit in your pocket, take these strippers with you to remove the insulation from fiber-optic cable.

Cut and strip fiber-optic cable.

Designed to turn like a screwdriver, these tools strip short lengths of twisted-pair Ethernet cable in tight spaces.

For three-layer stripping, this stripper includes a replaceable blade cartridge, four V-blocks to accommodate a variety of cable outer diameters, and an L-key to adjust blade height.

This tool turns like a screwdriver to strip a short coaxial cable in a tight space.

Strip both Ethernet and coaxial cable.

Also known as lineman’s and combination pliers, use these tools to pull, bend, and cut wire.

Additional features, such as wire terminal crimpers, enable you to perform a variety of electrical wiring and installation work with a single tool. Also known as lineman’s and combination pliers, these pliers have long jaws that pull, bend, and cut wire and other small workpieces.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use them to pull, bend, and cut wire.

Made of aluminum-bronze that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use them to pull, bend, and cut wire.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height. Use these tools to pull, bend, and cut wire.