Compact Plastic Submersible Cord Grips
These grips are sized to fit in tight areas. They are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water. They are also rated NEMA 4X, 6, and 12 for indoor and outdoor protection against corrosion, water projected from a hose, and dripping oils and lubricants. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection. For the strongest hold and most secure seal around a cord, select cord grips with the smallest cord OD range that will work with your cord.
| For Cord OD | For Knockout Trade Size | Thread Size  | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
PG Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.27"-0.47" | PG-21 | PG-21 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL Listed, CSA Certified, UL 746C f1, UL 94 V-0, CE Marked | 000000000 | 00000 |
| 0.35"-0.63" | PG-21 | PG-21 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL Listed, CSA Certified, UL 746C f1, UL 94 V-0, CE Marked | 000000000 | 0000 |
| 0.51"-0.71" | PG-21 | PG-21 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL Listed, CSA Certified, UL 746C f1, UL 94 V-0, CE Marked | 000000000 | 0000 |
Plastic Submersible Cord Grips
Able to resist most chemicals and withstand use underwater, these nylon grips are rated IP68 for protection from dusty environments and prolonged submersion. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection. All are CE marked and TUV Rheinland certified, which means they meet European safety standards. Grips with UL certifications meet American safety standards, while those with C-UL and CSA certifications meet Canadian safety standards. Some also meet standards for marine vessels classed by DNV-GL.
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Cord OD | For Knockout Trade Size | Temp. Range, °F | Features | Environmental Rating | Specifications Met | 1-9 | 10-Up | |
PG Threads | ||||||||
| 0.51"-0.71" | PG-21 | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 12, IP68 | UL Listed, C-UL Listed, CSA Certified, CE Marked, TUV Rheinland Certified | 0000000 | 00000 | 00000 |
High-Temperature Plastic Submersible Cord Grips
Made of PVDF, these grips are able to withstand temperatures up to 300° F and are corrosion- and chemical-resistant. Grips are rated NEMA 12 for protection from splashing oil and coolant as well as IP68 and NEMA 6 for protection from continuous submersion. They’re also rated IP69K and NEMA 4X, which means in addition to being submersible, they withstand high-pressure, high-temperature washdowns and can be dunked in corrosive liquids without any affect. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.
| For Cord OD | For Knockout Trade Size | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
PG Threads | |||||||
|---|---|---|---|---|---|---|---|
| 0.35"-0.63" | PG-21 | -30° to 300° | Nickel-Plated Brass Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL Listed, CSA Certified, UL 94 V-0 | 0000000 | 000000 |
| 0.51"-0.71" | PG-21 | -30° to 300° | Nickel-Plated Brass Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL Listed, CSA Certified, UL 94 V-0 | 0000000 | 00000 |
Continuous-Flex Plastic Submersible Cord Grips
These grips have an extension that provides extra support for moving cables and prevents kinking for longer cable life. Grips are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water. They are also rated NEMA 4X, 6, and 12 for indoor and outdoor protection against corrosion, water projected from a hose, and dripping oils and lubricants. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.
| For Cord OD | For Knockout Trade Size | Thread Size | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
PG Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.27"-0.47" | PG-21 | PG-21 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 4X, NEMA 6, NEMA 12, IP68, IP69K | UL Listed, UL 94 V-0, UL 746C f1, CSA Certified | 00000000 | 000000 |
| 0.35"-0.63" | PG-21 | PG-21 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 4X, NEMA 6, NEMA 12, IP68, IP69K | UL Listed, UL 94 V-0, UL 746C f1, CSA Certified | 00000000 | 00000 |
| 0.51"-0.71" | PG-21 | PG-21 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 4X, NEMA 6, NEMA 12, IP68, IP69K | UL Listed, UL 94 V-0, UL 746C f1, CSA Certified | 00000000 | 00000 |
90° Elbow Continuous-Flex Plastic Submersible Cord Grips
These grips have an extension that provides extra support for moving cables and prevents kinking for longer cable life. Grips are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water. They are also rated NEMA 4X, 6, and 12 for indoor and outdoor protection against corrosion, water projected from a hose, and dripping oils and lubricants. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.
| For Cord OD | For Knockout Trade Size | Thread Size | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
PG Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.35"-0.63" | PG-21 | PG-21 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP68, IP69K, NEMA 12, NEMA 4X, NEMA 6 | CSA Certified, UL 746C f1, UL 94 V-0, UL Listed | 0000000 | 000000 |
| 0.51"-0.71" | PG-21 | PG-21 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP68, IP69K, NEMA 12, NEMA 4X, NEMA 6 | CSA Certified, UL 746C f1, UL 94 V-0, UL Listed | 0000000 | 00000 |
Wraparound Plastic Submersible Cord Grips
Wrap the split gland of these grips around ethernet cables with an RJ45 connector or other already installed cables for a water-resistant seal with your enclosure. They’re rated IP68 and NEMA 6P, so they withstand use under water and protect electronics inside enclosures from moisture and harsh chemicals. All are made of nylon, making them corrosion and wear resistant. They relieve the strain on a cable when its pulled, extending the life of the cable.
When choosing a size, keep in mind that the sealing nut ID and body ID must be large enough for the end of your cord to fit through with the connector.
| For Cord OD | For Knockout Trade Size | Sealing Nut ID | Body ID | Temperature Range, °F | Features | Environmental Rating | Specifications Met | Each | |
PG Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.21"-0.33" | PG-21 | 0.72" | 0.71" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 00000000 | 00000 |
Plastic Submersible Cord Grips for Building Cable
A rubber bushing with an oval slot resists water and provides entry for building cable, which is also known as Romex type NM-B or type UF-B cable. They are rated IP68 and IP69K for protection from prolonged submersion and high-pressure, high-temperature jets of water. Made of nylon, these cord grips keep electrical assemblies lightweight. They also withstand chemicals and corrosive environments.
For Cord | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | For Knockout Trade Size | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
PG Threads | |||||||||
| 0.55" | 0.24" | PG-21 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 00000 |
| 0.55" | 0.28" | PG-21 | Black Nylon Plastic | -40° to 210° F | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL 746C f1, UL 94 V-0 | 0000000 | 0000 |
90° Elbow Plastic Submersible Cord Grips
Able to resist most chemicals and withstand use underwater, these nylon grips are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water. They are also rated NEMA 4X, 6, and 12 for indoor and outdoor protection against corrosion, water projected from a hose, and dripping oils and lubricants. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection. All meet UL 746C f1, so they’re UV resistant and can be used in direct sunlight, as well as UL 94 V-0, which means they’ll self-extinguish within 10 seconds of catching fire and won’t spread flames by dripping. UL listed and CSA certified, they meet U.S. and Canadian safety standards.
| For Cord OD | For Knockout Trade Size | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
PG Threads | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.35"-0.63" | PG-21 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | UL Listed, UL 94 V-0, UL 746C f1, CSA Certified | 0000000 | 000000 |
Flared Plastic Submersible Cord Grips
Secure cords installed through enclosures and panels in wet environments while protecting them against sharp bends. With a flared end that keeps cords from bending without limiting too much motion, these grips extend cord life. They’re good for cords used on handheld equipment. Made of polyamide, they stand up to corrosion and wear.
| For Cord OD | For Knockout Trade Size | Flare Diameter | Material | Temperature Range, °F | Features | Environmental Rating | Specifications Met | Each | |
PG Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.51"-0.71" | PG-21 | 1 5/8" | Gray Polyamide Plastic | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 12, IP68 | UL Listed, C-UL Listed, CE Marked | 0000000 | 00000 |
Screw-Down Sure-Grip Plastic Submersible Cord Grips
Tighten the screw-down clamp on these grips for superior pull-out resistance while relieving tension at connection points. Grips are rated IP68 for protection from prolonged submersion and IP69K for protection against high-pressure, high-temperature jets of water. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.
| For Cord OD | For Knockout Trade Size | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
PG Threads | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.51"-0.71" | PG-21 | Black Nylon Plastic | 0° to 155° | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6 | UL 94 V-0, CE Marked, DNV-GL Type Approved | 00000000 | 000000 |
Brass Submersible Cord Grips
Suitable for use in applications where cords are underwater—these grips are rated IP68 for protection from prolonged submersion. They are nickel plated for good corrosion resistance. A rubber bushing and O-ring create a tight seal to prevent liquid from entering your connection.
| For Cord OD | For Knockout Trade Size | Thread Size | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
PG Threads | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.43"-0.71" | PG-21 | PG-21 | 0° to 210° | Nickel-Plated Brass Locknut, Rubber O-Ring | IP68 | CE Marked | 0000000 | 000000 |
Stainless Steel Submersible Cord Grips
These stainless steel grips offer the most corrosion resistance of any of our submersible metal cord grips. Grips are rated IP68 for protection from prolonged submersion and IP69K for protection from high-pressure, high-temperature jets of water. A rubber bushing and O-ring create a tight seal to prevent liquid from entering your connection.
| For Cord OD | For Knockout Trade Size | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
PG Threads | |||||||
|---|---|---|---|---|---|---|---|
| 0.51"-0.71" | PG-21 | -20° to 210° | Rubber O-Ring, Nickel-Plated Brass Locknut | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | CE Marked, CSA Certified, UL Listed | 0000000 | 0000000 |
Cord Grips for Flat Cable
Connect a single flat cable to a junction box.
For Cord | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | For Knockout Trade Size | Thread Type | Material | Cord Holding Type | Bushing Material | Temp. Range, °F | Features | Each | |
| 0.62" | 0.22" | PG-21 | PG | Aluminum | Bushing | Rubber | 0° to 210° | Mounting Nut, Rubber Gasket | 0000000 | 000000 |