These ties are less likely to crack and break from dryness than regular cable ties.

These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.

The head of these cable ties is contoured to fit against pipe, tubing, and other round material for a tight fit.

These strong, wide ties are often used as an alternative to metal strapping.

These ties meet UL flammability requirements.

Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.

For use in environments subjected to chemicals, these ties withstand the most corrosive conditions.

Pull the tab to tear off these cable ties.

Often used as tamper seals and in tagging applications, these ties create a consistent loop size every time.

Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.

Identify bundles at a glance.

These soft cable ties won’t damage delicate material. The ribs gently grip material while securely holding the tie.

A hard rubber coating and wire core helps these ties maintain their shape.

These ties have a loop on each end that can be twisted around each other for a secure closure.

Create strong and durable custom-length ties with a hard rubber coating and wire core.

Create custom-length ties for bundling delicate materials.

Mount these ties where needed—a hard rubber coating and wire core helps them maintain their shape.

The plastic coating on these ties adds an additional level of corrosion and abrasion resistance over other stainless steel cable ties.

Flexible enough for small bundles, these ties are often used for electronics.

Bundle cables outdoors with these ties that withstand exposure to UV rays and water.

These ties stretch to hold material tightly without slipping.

These cable ties are easy to yank apart or cinch shut, even when wearing gloves—a textured tab on the end gives you a good grip.

Create custom-length ties from a roll with hook on one side and loop on the other.

Stick these ties to any smooth, clean surface.

Feed a bundle through the closed loop and wrap the ends around pipe or conduit for support.

These stretchy ties conform to irregularly shaped bundles to grip material tightly.

Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.

Use this rubber tape to splice cable in high-voltage applications.

This traditional black cotton electrician's tape provides an abrasion-resistant shield for wrapping low-voltage splices.

Also known as Scotchfil, this noncorrosive putty tape wraps, stretches, and molds around irregular shapes for insulation buildup.

This polyester tape has a woven mesh edge that conducts electricity. Use it to shield cables and electronic components from EMI (electromagnetic interference).

Quickly conduct heat away from electronic components. Kapton® polyimide gives this tape excellent electrical isolation.

A coating on this polyimide tape minimizes ESD (electrostatic discharge) when unwound from the roll and also during removal.

Made of polyester fabric with a copper/nickel filler, this tape is highly conductive throughout, including the adhesive.

Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.

Our most slippery tape, the slick surface allows items to glide smoothly over it.

Backed with 3M VHB 4941 foam adhesive for strength, padding, and vibration resistance.

PEEK offers the best wear and abrasion resistance of our low-friction tapes. Use it for wire wraps and sliding bearing surfaces.

A combination of moisture and chemical resistance makes this hook and loop a good choice for most applications.

Both the hook and the loop meet MIL-A-A-55126B.

Woven from Nomex and flexible stainless steel yarn, this hook and loop withstands temperatures up to 800° F.

Resistant to water and UV light, this hook and loop stands up to outdoor use.

Cut to wrap around any size bundle.

This hook and loop meets FMVSS 302 and UL 94V2 for flame retardance.

When two parallel strips are pressed together, the low-profile hook heads click together to create a zipper-like fastener at one-third the thickness of other snap-together fasteners.