Container Type Container Type |
---|
![]() | ![]() |
Aerosol Can | Squeeze Bottle |
![]() | ![]() |
Spray Bottle | Pen |
![]() | |
Pail |
For Use On For Use On |
---|
Lubricant Type Lubricant Type |
---|
|
Trade Name Trade Name |
---|
|
More
More
Spray these lubricants onto wire rope and cable used in vertical or fast-moving applications. They dispense as a thick gel, completely covering wire strands without dripping or running off. Use them to cut through dirt, grease, and rust, and to protect wire rope and cable. Lubricants come in an aerosol can with a flip-up straw that’s attached to the nozzle so it won’t get lost. Raise it for precision dispensing; lower it for storage or to dispense lubricants as a spray.
By traveling along individual strands and penetrating to the core of wire rope and cable, these lubricants maximize coverage to prevent rust and reduce wear. They cut through dirt, grease, and rust to protect wire rope and cable.
Lubricants with moly (molybdenum disulfide) withstand high loads and have excellent wear resistance. They can be applied while wire rope is in motion. Lubricants with PTFE leave no residue. They come in a pen for precision applications.
Container | |||||
---|---|---|---|---|---|
Size | Type | Additive | Temp. Range, °F | Each | |
Sprayon LU 201 Open Gear & Wire Rope | |||||
14 oz. | Spray Bottle | Moly | 0° to 450° | 0000000 | 000000 |
5 gal. | Pail | Moly | 0° to 450° | 0000000 | 000000 |
Lubricants | |||||
0.4 oz. | Pen | PTFE | -60° to 500° | 0000000 | 0000 |
Container | ||||||
---|---|---|---|---|---|---|
Size | Type | Additive | Temp. Range, °F | Pkg. Qty. | Pkg. | |
Sprayon LU 201 Open Gear & Wire Rope | ||||||
14 oz. | Spray Bottle | Moly | 0° to 450° | 12 | 0000000 | 0000000 |
Protect wire rope and cable from corrosion in wet environments. These lubricants have fast-penetrating solvents that quickly reach the core of wire rope and cable to remove water and protect against corrosion. Made with moly (molybdenum disulfide), they withstand high loads and have excellent wear resistance.
Use these lubricants to ensure smooth, consistent motion when pulling wire or cable through conduit. They provide long-lasting lubrication to support repositioning and maintenance after initial cable installation. Compatible with all cable and insulation types.
Lubricants without PTFE can be washed off with soap and water. Lubricants with PTFE provide maximum lubricity.
Made of graphite in a thin oil, these lubricants penetrate wire rope and cable to the core. When the oil evaporates, it leaves behind a dry film of graphite that prevents wear and corrosion throughout the rope without attracting dust.
Penetrate to the core of wire rope, preventing rust and reducing wear between strands. This grease has excellent corrosion resistance and is suitable for use in marine environments. It is thick to stay in place at high wire rope travel speeds.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 3 is about the consistency of vegetable shortening.
Grease lubricates most efficiently within the listed temperature range. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size, gal. | Type | Temp. Range, °F | Melting Temp. | Color | Each | |
Clay Thickener | ||||||||
3 | Mineral | 5 | Pail | 5° to 400° | Nonmelting | Amber | 0000000 | 0000000 |
Clamp this applicator around control cables to lubricate them with minimal mess. Tighten the applicator around either end of the cable, then insert the aerosol extension tube and spray.