Mount these trolleys to your existing channel to create a cable and hose travel system.

These systems consist of a series of small trolleys that travel on the included wire rope, carrying your cable or hose along with them. Because these systems mount to the side of your crane, they require minimal structural support.

Let go of your tool and the cable pulls it back up.

Secure to a square arbor.

Housings have holes for mounting.

Cable tension is controlled by an air regulator for precise, constant tool positioning.

Support the weight of your tool with air hose instead of a separate cable.

Connect the wires in your power cord to these reels for a permanent and protected connection—the screw terminals are in a gasketed dust- and water-resistant NEMA 4 enclosure.

A ratchet holds the extension cord on these reels in place at any length; a quick pull releases the cord and the spring-driven winding mechanism retracts it.

Use these cord reels where ignitable gas and dust may be present. They're rated NEMA 4 and UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

A steel stand makes these reels more rugged than light duty cord reels.

Attach the wires in a power cord to these reels for a permanent connection.

Control the amount of cord that retracts into a reel.

Combine a counter, feeder reel, coiler reel, and stand to create a wire, cable, and cord length measurer.