For Rope Diameter For Rope Diameter |
---|
|
|
|
Material Material |
---|
|
With or Without Bearing With or Without Bearing |
---|
|
OD OD |
---|
Application Application |
---|
|
Capacity Capacity |
---|
|
For Shaft Diameter For Shaft Diameter |
---|
|
|
|
Width Width |
---|
Pulley Diameter Pulley Diameter |
---|
Bearing Material Bearing Material |
---|
|
Insertion Style Insertion Style |
---|
|
Finish Finish |
---|
|
Housing Material Housing Material |
---|
|
Overall Length Overall Length |
---|
Overall Height Overall Height |
---|
More
Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a ball bearing are easier to turn than pulleys with a sleeve bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Specifications Met | Each | ||
A | 1/4" | 250 | 1 1/2" | 1 1/16" | 1/4" | 9/16" | Nylon Plastic | __ | 0000000 | 00000 |
A | 1/4" | 750 | 2 3/4" | 2 1/4" | 5/16" | 9/16" | Nylon Plastic | __ | 0000000 | 0000 |
A | 1/4" | 1,200 | 3" | 2 3/8" | 5/16" | 5/8" | Nylon Plastic | __ | 0000000 | 0000 |
B | 1/8" | 675 | 2 1/2" | 2 1/4" | 1/2" | 1/2" | Zinc-Plated Steel | ASME B30.26 | 0000000 | 0000 |
B | 3/16" | 525 | 1 1/2" | 1" | 1/2" | 1/2" | Zinc-Plated Steel | ASME B30.26 | 00000000 | 0000 |
B | 3/16" | 600 | 2" | 1 1/2" | 1/2" | 1/2" | Zinc-Plated Steel | ASME B30.26 | 00000000 | 0000 |
B | 1/4" | 675 | 2 1/2" | 2" | 1/2" | 1/2" | Zinc-Plated Steel | ASME B30.26 | 00000000 | 0000 |
B | 1/4" | 800 | 3" | 2 1/2" | 1/2" | 1/2" | Zinc-Plated Steel | ASME B30.26 | 00000000 | 00000 |
B | 5/16" | 1,550 | 3 1/2" | 3" | 3/4" | 11/16" | Zinc-Plated Steel | ASME B30.26 | 00000000 | 00000 |
B | 3/8" | 1,700 | 4" | 3 1/4" | 3/4" | 11/16" | Zinc-Plated Steel | ASME B30.26 | 0000000 | 00000 |
B | 3/8" | 1,850 | 5" | 4 1/4" | 3/4" | 11/16" | Zinc-Plated Steel | ASME B30.26 | 0000000 | 00000 |
B | 3/4" | 6,000 | 6" | 5 3/16" | 1" | 1" | Zinc-Plated Steel | ASME B30.26 | 0000000 | 00000 |
C | 1/4" | 1,200 | 4" | 3 1/4" | 1/2" | 13/16" | Powder-Coated Steel | __ | 0000000 | 00000 |
C | 1/4" | 1,200 | 4" | 3 1/4" | 3/4" | 13/16" | Powder-Coated Steel | __ | 0000000 | 00000 |
C | 5/16" | 1,800 | 5" | 4" | 3/4" | 1" | Powder-Coated Steel | __ | 0000000 | 00000 |
C | 3/8" | 1,600 | 4" | 3 1/8" | 1/2" | 13/16" | Powder-Coated Steel | __ | 0000000 | 00000 |
C | 3/8" | 1,600 | 4 1/8" | 3" | 1" | 1 1/2" | Powder-Coated Steel | __ | 0000000 | 00000 |
C | 3/8" | 1,700 | 4" | 3 1/8" | 3/4" | 13/16" | Powder-Coated Steel | __ | 0000000 | 00000 |
C | 3/8" | 2,700 | 6" | 4 15/16" | 1 1/4" | 1 1/8" | Powder-Coated Steel | __ | 0000000 | 000000 |
C | 3/8" | 2,800 | 6" | 5" | 3/4" | 1 1/16" | Powder-Coated Steel | __ | 0000000 | 000000 |
C | 3/8" | 2,800 | 6" | 5" | 1" | 1 1/16" | Powder-Coated Steel | __ | 0000000 | 000000 |
C | 3/8" | 3,600 | 8" | 6 1/2" | 1 1/4" | 1 3/8" | Powder-Coated Steel | __ | 0000000 | 000000 |
C | 1/2" | 3,200 | 6" | 4 7/8" | 3/4" | 1 1/16" | Powder-Coated Steel | __ | 0000000 | 000000 |
C | 1/2" | 3,600 | 6" | 4 7/8" | 1" | 1 1/16" | Powder-Coated Steel | __ | 0000000 | 000000 |
C | 1/2" | 3,600 | 6" | 4 15/16" | 1 1/4" | 1 1/8" | Powder-Coated Steel | __ | 0000000 | 000000 |
C | 1/2" | 4,800 | 8" | 6 5/8" | 1" | 1 3/8" | Powder-Coated Steel | __ | 0000000 | 000000 |
C | 5/8" | 3,200 | 6" | 5" | 3/4" | 1 1/16" | Powder-Coated Steel | __ | 0000000 | 000000 |
C | 5/8" | 4,200 | 6" | 5" | 1" | 1 1/16" | Powder-Coated Steel | __ | 0000000 | 000000 |
C | 5/8" | 6,000 | 8" | 6 5/8" | 1 1/4" | 1 3/8" | Powder-Coated Steel | __ | 0000000 | 000000 |
For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia., mm | Wd. | Material | Specifications Met | Each | ||
D | 1/8" | 1,000 | 2 1/4" | 2" | 12 | 13/16" | Powder-Coated Steel | ASME B30.26 | 0000000 | 0000000 |
D | 1/4" | 3,500 | 4 1/4" | 3 3/4" | 20 | 1 3/16" | Powder-Coated Steel | ASME B30.26 | 0000000 | 000000 |
D | 3/8" | 7,000 | 6" | 5 5/16" | 30 | 1 1/2" | Powder-Coated Steel | ASME B30.26 | 0000000 | 000000 |
D | 1/2" | 10,500 | 8" | 7" | 35 | 1 11/16" | Powder-Coated Steel | ASME B30.26 | 0000000 | 000000 |
D | 5/8" | 16,000 | 10" | 8 3/4" | 45 | 2" | Powder-Coated Steel | ASME B30.26 | 0000000 | 000000 |
Mount these pulleys to a flat surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as block and tackle systems. They can reduce the force needed to move the load by up to two times compared to single-groove pulleys.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Specifications Met | Each | |
Single-Groove Without Bearing | ||||||||||||||
1 | 3/16" | 600 | 2" | 5/8" | 2" | 2 3/8" | Steel | 4 | 3/16" | 1 7/16" | 11/16" | ASME B30.26 | 0000000 | 00000 |
1 | 1/4" | 800 | 3" | 5/8" | 3" | 3 9/16" | Steel | 4 | 3/16" | 1 7/16" | 11/16" | ASME B30.26 | 0000000 | 00000 |
1 | 5/16" | 1,550 | 3 1/2" | 1" | 3 1/2" | 4 3/8" | Steel | 4 | 1/4" | 2 5/8" | 1" | ASME B30.26 | 0000000 | 00000 |
1 | 3/8" | 1,550 | 3 1/2" | 1" | 3 1/2" | 4 3/8" | Steel | 4 | 1/4" | 2 5/8" | 1" | ASME B30.26 | 000000 | 00000 |
Single-Groove With Bearing | ||||||||||||||
2 | 1/4" | 3,500 | 4 1/4" | 5 1/4" | 4 1/4" | 4 1/2" | Stainless Steel | 4 | 3/8" | 2 3/8" | 3 7/16" | ASME B30.26 | 0000000 | 000000 |
2 | 1/4" | 3,500 | 4 1/4" | 5 1/4" | 4 1/4" | 4 1/2" | Steel | 4 | 3/8" | 2 3/8" | 3 7/16" | ASME B30.26 | 00000000 | 000000 |
2 | 3/8" | 7,000 | 6" | 6 3/4" | 6" | 6 1/2" | Steel | 4 | 1/2" | 3 1/4" | 4 13/16" | ASME B30.26 | 00000000 | 000000 |
2 | 1/2" | 10,500 | 8" | 8 7/8" | 8" | 8 3/8" | Steel | 4 | 11/16" | 4 1/2" | 5 15/16" | ASME B30.26 | 00000000 | 000000 |
3 | 1/4" | 3,500 | 4 1/4" | 4 23/32" | 5 5/16" | 6 21/32" | Steel | 4 | 1/2" | 3 15/16" | 3 1/2" | ASME B30.26 | 0000000 | 000000 |
3 | 3/8" | 7,000 | 6" | 7 1/4" | 9 3/4" | 10 1/4" | Steel | 4 | 9/16" | 8 1/2" | 5 7/8" | ASME B30.26 | 0000000 | 000000 |
Double-Groove Without Bearing | ||||||||||||||
4 | 3/16" | 600 | 2" | 1 7/32" | 2" | 2 3/8" | Steel | 4 | 3/16" | 2" | 11/16" | ASME B30.26 | 0000000 | 00000 |
4 | 1/4" | 800 | 3" | 1 7/32" | 3" | 3 9/16" | Steel | 4 | 3/16" | 2" | 11/16" | ASME B30.26 | 0000000 | 00000 |
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Style E pulleys have bracket on the bottom that lets you tie off one end of your wire rope.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Hook Opening Wd. | Hook Thick. | Material | Specifications Met | Each | |
Single-Groove Without Bearing | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rigid Eye | ||||||||||||||
A | 3/16" | 600 | 2" | 5/8" | 2" | 3 3/4" | 3/8" | 1/4" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
A | 1/4" | 800 | 3" | 5/8" | 3" | 4 13/16" | 3/8" | 1/4" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
A | 5/16" | 1,550 | 3 1/2" | 1" | 3 1/2" | 6 1/2" | 9/16" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
A | 3/8" | 1,550 | 3 1/2" | 1" | 3 1/2" | 6 1/2" | 9/16" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
Rigid Shackle | ||||||||||||||
D | 3/8" | 6,000 | 6" | 1 5/8" | 9 1/4" | 17 5/16" | 1 5/8" | 1" | __ | __ | Steel | ASME B30.26 | 0000000 | 000000 |
Swivel Eye | ||||||||||||||
B | 3/16" | 600 | 2" | 5/8" | 2" | 4 1/4" | 5/8" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
B | 1/4" | 800 | 3" | 5/8" | 3" | 5 5/8" | 7/8" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
B | 5/16" | 1,550 | 3 1/2" | 1" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
B | 3/8" | 1,550 | 3 1/2" | 1" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | __ | __ | Steel | ASME B30.26 | 00000000 | 00000 |
Swivel Latching Hook | ||||||||||||||
C | 3/16" | 600 | 2" | 1/2" | 2" | 4 5/8" | __ | __ | 5/16" | 3/8" | Steel | ASME B30.26 | 0000000 | 00000 |
C | 1/4" | 675 | 2 1/2" | 5/8" | 2 1/2" | 5 3/4" | __ | __ | 1/2" | 7/16" | Steel | ASME B30.26 | 0000000 | 00000 |
C | 1/4" | 800 | 3" | 5/8" | 3" | 6 1/4" | __ | __ | 1/2" | 7/16" | Steel | ASME B30.26 | 0000000 | 00000 |
C | 5/16" | 1,550 | 3 1/2" | 7/8" | 3 1/2" | 8 1/2" | __ | __ | 13/16" | 9/16" | Steel | ASME B30.26 | 0000000 | 00000 |
C | 3/8" | 1,550 | 3 1/2" | 7/8" | 3 1/2" | 8 1/2" | __ | __ | 13/16" | 9/16" | Steel | ASME B30.26 | 0000000 | 00000 |
Single-Groove With Bearing | ||||||||||||||
Rigid Shackle | ||||||||||||||
E | 3/8" | 10,000 | 4" | 3 7/8" | 4 1/2" | 7 3/4" | 1 1/4" | 15/16" | __ | __ | Steel | __ | 0000000 | 000000 |
E | 1/2" | 13,000 | 6" | 4 5/8" | 6 1/2" | 10 1/2" | 1 1/2" | 1 1/8" | __ | __ | Steel | __ | 0000000 | 000000 |
E | 5/8" | 13,000 | 8" | 5" | 9" | 14 1/2" | 1 3/4" | 1 3/16" | __ | __ | Steel | __ | 0000000 | 000000 |
Double-Groove Without Bearing | ||||||||||||||
Swivel Eye | ||||||||||||||
F | 3/16" | 525 | 1 1/2" | 1 7/32" | 1 1/2" | 3 13/16" | 5/8" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
F | 1/4" | 800 | 3" | 1 7/32" | 3" | 5 5/8" | 7/8" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
F | 5/16" | 1,550 | 3 1/2" | 1 13/16" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
Also known as snatch blocks, these pulleys open so it's easier to feed the rope through the housing—a free rope end is not needed.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Style C to keep rope secure.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Pulleys | Optional Latch Kits | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Hook Opening Wd. | Hook Thick. | Material | Specifications Met | Each | Each | ||
Single-Groove Without Bearing | ||||||||||||||||
Swivel Eye | ||||||||||||||||
A | 3/16" | 600 | 2" | 5/8" | 2" | 4 1/4" | 5/8" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 000000 | 000000 | 00 |
A | 1/4" | 675 | 2 1/2" | 5/8" | 2 1/2" | 5" | 7/8" | 7/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 | 000000 | 00 |
A | 5/16" | 1,550 | 3 1/2" | 1" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 | 000000 | 00 |
A | 3/8" | 1,550 | 3 1/2" | 1" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 | 000000 | 00 |
Swivel Shackle | ||||||||||||||||
B | 1/2" | 8,800 | 4 1/2" | 1 7/8" | 4 1/2" | 13 1/8" | 1 3/16" | 11/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 000000 | 000000 | 00 |
B | 3/4" | 17,600 | 6" | 2 3/8" | 6" | 18 7/8" | 2 1/4" | 1 7/32" | __ | __ | Steel | ASME B30.26 | 0000000 | 000000 | 000000 | 00 |
Swivel Hook | ||||||||||||||||
C | 3/8" | 4,400 | 3" | 1 1/2" | 3" | 9 3/4" | __ | __ | 1" | 3/4" | Steel | ASME B30.26 | 0000000 | 000000 | 00000000 | 00000 |
C | 1/2" | 8,800 | 4 1/2" | 2" | 4 1/2" | 15 1/8" | __ | __ | 1 3/16" | 1 5/16" | Steel | ASME B30.26 | 0000000 | 000000 | 00000000 | 0000 |
C | 3/4" | 17,600 | 6" | 2 1/4" | 6" | 18 7/8" | __ | __ | 1 11/16" | 1 3/4" | Steel | ASME B30.26 | 0000000 | 000000 | 00000000 | 00000 |
C | 7/8" | 26,400 | 6" | 2 5/16" | 6" | 19 3/4" | __ | __ | 2 1/4" | 1 5/8" | Steel | ASME B30.26 | 0000000 | 000000 | 00000000 | 00000 |
Double-Groove Without Bearing | ||||||||||||||||
Swivel Eye | ||||||||||||||||
D | 3/16" | 600 | 2" | 1 7/32" | 2" | 4 1/4" | 5/8" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 | 000000 | 00 |
D | 5/16" | 1,550 | 3 1/2" | 1 19/32" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 | 000000 | 00 |
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing. Ball bearings and needle-roller bearings allow for easier turns than sleeve bearings.
Acetal and nylon are lightweight and corrosion resistant. Stainless steel is the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Each | ||
Without Bearing | |||||||||
---|---|---|---|---|---|---|---|---|---|
A | 1/32" | Not Rated | 3/8" | 5/16" | 1/8" | 1/8" | Acetal Plastic | 0000000 | 00000 |
A | 1/32" | Not Rated | 5/8" | 1/2" | 1/8" | 1/8" | Acetal Plastic | 0000000 | 0000 |
A | 3/64" | Not Rated | 3/4" | 5/8" | 1/8" | 3/16" | Acetal Plastic | 0000000 | 0000 |
A | 3/64" | Not Rated | 1" | 13/16" | 3/16" | 3/16" | Acetal Plastic | 0000000 | 0000 |
A | 3/64" | Not Rated | 1 1/16" | 7/8" | 3/16" | 1/4" | Acetal Plastic | 0000000 | 0000 |
A | 1/16" | Not Rated | 1 1/4" | 1 1/16" | 3/16" | 1/4" | Acetal Plastic | 0000000 | 0000 |
A | 1/8" | Not Rated | 1 3/4" | 1 3/8" | 1/4" | 5/16" | Acetal Plastic | 0000000 | 0000 |
A | 3/16" | Not Rated | 1 9/16" | 1 1/4" | 1/4" | 3/8" | Acetal Plastic | 0000000 | 0000 |
A | 1/4" | Not Rated | 1 15/16" | 1 9/16" | 5/16" | 7/16" | Acetal Plastic | 0000000 | 0000 |
C | 3/32" | 200 | 2 1/2" | 2 3/16" | 1/4" | 1/4" | Nylon Plastic | 0000000 | 0000 |
C | 3/16" | 800 | 3" | 2 1/2" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 0000 |
C | 3/16" | 800 | 3 1/2" | 3" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 0000 |
C | 1/4" | 1,400 | 4" | 3 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
C | 1/4" | 1,400 | 4 1/2" | 3 7/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
C | 1/4" | 1,400 | 5" | 4 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
D | 5/16" | 1,600 | 5 1/2" | 4 5/8" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 |
D | 5/16" | 1,600 | 6" | 5 1/4" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 |
With Sleeve Bearing | |||||||||
G | 1/4" | 950 | 3" | 2 3/8" | 3/8" | 9/16" | Iron | 0000000 | 00000 |
G | 3/8" | 1,250 | 3" | 2 1/4" | 3/8" | 13/16" | Iron | 0000000 | 00000 |
G | 3/8" | 2,000 | 4" | 3 1/4" | 3/4" | 13/16" | Iron | 0000000 | 00000 |
G | 1/2" | 3,000 | 5" | 3 7/8" | 3/4" | 1 1/16" | Iron | 0000000 | 00000 |
G | 7/8" | 4,300 | 5 7/8" | 4 3/8" | 1 1/2" | 1 3/4" | Steel | 0000000 | 000000 |
H | 1/8" | 1,000 | 2 1/4" | 1 7/8" | 1/4" | 13/16" | Stainless Steel | 00000000 | 00000 |
H | 3/16" | 1,500 | 3 1/4" | 2 3/4" | 3/8" | 15/16" | Stainless Steel | 00000000 | 00000 |
H | 1/4" | 3,000 | 4 1/4" | 3 1/2" | 1/2" | 1 1/8" | Stainless Steel | 00000000 | 000000 |
H | 5/16" | 5,000 | 5 1/4" | 4 3/8" | 1/2" | 1 3/8" | Stainless Steel | 00000000 | 000000 |
H | 3/8" | 8,000 | 6 1/4" | 5 1/4" | 1/2" | 1 5/8" | Stainless Steel | 00000000 | 000000 |
With Ball Bearing | |||||||||
B | 1/32" | 10 | 5/8" | 1/2" | 1/8" | 1/8" | Nylon Plastic | 0000000 | 00000 |
B | 3/64" | 10 | 3/4" | 5/8" | 1/8" | 3/16" | Nylon Plastic | 0000000 | 00000 |
B | 3/64" | 90 | 1 1/16" | 7/8" | 3/16" | 1/4" | Nylon Plastic | 0000000 | 00000 |
B | 1/16" | 90 | 1 1/4" | 1 1/16" | 3/16" | 1/4" | Nylon Plastic | 0000000 | 00000 |
B | 3/32" | 90 | 1 1/2" | 1 1/4" | 1/4" | 5/16" | Nylon Plastic | 0000000 | 00000 |
B | 1/8" | 90 | 1 3/4" | 1 3/8" | 1/4" | 5/16" | Nylon Plastic | 0000000 | 00000 |
E | 3/64" | 35 | 1/2" | 3/8" | 1/8" | 3/16" | Steel | 0000000 | 0000 |
E | 3/32" | 175 | 1 1/16" | 7/8" | 3/16" | 5/16" | Steel | 0000000 | 0000 |
E | 1/8" | 125 | 1" | 3/4" | 3/16" | 3/8" | Steel | 0000000 | 0000 |
E | 3/16" | 175 | 1 1/4" | 7/8" | 1/4" | 7/16" | Steel | 0000000 | 0000 |
E | 1/4" | 275 | 1 3/4" | 1 1/4" | 3/8" | 1/2" | Steel | 0000000 | 0000 |
F | 3/16" | 85 | 1 1/4" | 1" | 5/32" | 7/16" | Steel | 0000000 | 00000 |
F | 7/32" | 300 | 2 3/4" | 2 3/16" | 5/8" | 9/16" | Steel | 0000000 | 00000 |
F | 11/32" | 300 | 2 3/4" | 2 3/8" | 3/8" | 9/16" | Steel | 0000000 | 00000 |
F | 11/32" | 300 | 3" | 2 3/8" | 3/8" | 11/16" | Steel | 0000000 | 00000 |
F | 3/8" | 300 | 2 7/8" | 2 9/16" | 1/4" | 1/2" | Steel | 0000000 | 00000 |
F | 3/8" | 300 | 3 1/16" | 2 9/16" | 3/8" | 1/2" | Steel | 0000000 | 00000 |
F | 3/8" | 450 | 4 1/16" | 3 9/16" | 3/8" | 3/4" | Steel | 0000000 | 00000 |
F | 7/16" | 325 | 3 3/8" | 2 11/16" | 3/8" | 11/16" | Steel | 0000000 | 00000 |
F | 1/2" | 275 | 3" | 2 5/8" | 5/16" | 3/4" | Steel | 0000000 | 00000 |
F | 17/32" | 300 | 2 7/8" | 2 1/4" | 1/2" | 13/16" | Steel | 0000000 | 00000 |
H | 1/8" | 1,000 | 2 1/4" | 1 7/8" | 3/8" | 13/16" | Stainless Steel | 0000000 | 00000 |
H | 3/16" | 1,200 | 3 1/4" | 2 3/4" | 1/2" | 15/16" | Stainless Steel | 0000000 | 00000 |
H | 1/4" | 1,200 | 4 1/4" | 3 1/2" | 1/2" | 1 1/16" | Stainless Steel | 0000000 | 00000 |
With Needle-Roller Bearing | |||||||||
C | 3/32" | 200 | 2 1/2" | 2 3/16" | 1/4" | 1/4" | Nylon Plastic | 0000000 | 00000 |
C | 3/16" | 800 | 2 1/2" | 2" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 00000 |
C | 3/16" | 800 | 3 1/2" | 3" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 00000 |
C | 1/4" | 1,400 | 4" | 3 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
C | 1/4" | 1,400 | 5" | 4 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
D | 5/16" | 1,600 | 6" | 5 1/4" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 |
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load. They have a bracket on the bottom for tying off one end of your wire rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Nylon is lighter in weight than metal. Aluminum is corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner can mount to steel framing or hang as part of your rigging system.
For technical drawings and 3-D models, click on a part number.
For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Material | Housing Material | Each | ||
Single-Groove Without Bearing | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Eye | ||||||||||||
A | 1/4" | 150 | 1 3/8" | 9/16" | 1 3/8" | 2 13/16" | 3/8" | 3/16" | Nylon Plastic | Stainless Steel | 0000000 | 000000 |
A | 1/2" | 1,650 | 2" | 1 5/16" | 2" | 4 7/8" | 3/4" | 5/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
A | 9/16" | 2,475 | 3" | 1 5/16" | 3" | 7" | 15/16" | 7/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
A | 5/8" | 4,175 | 4" | 1 1/2" | 4" | 8" | 15/16" | 1/2" | Stainless Steel | Stainless Steel | 0000000 | 000000 |
Single-Groove With Bearing | ||||||||||||
Swivel Eye | ||||||||||||
A | 3/16" | 150 | 1 1/4" | 9/16" | 1 1/4" | 2 3/4" | 3/8" | 3/16" | Steel | Stainless Steel | 0000000 | 00000 |
B | 1/2" | 2,000 | 4 1/2" | 2 1/4" | 4 1/2" | 8 7/8" | 1 1/4" | 1/2" | Steel | Steel | 0000000 | 000000 |
Rigid Carabiner | ||||||||||||
C | 3/16" | 900 | 3 3/8" | 1 3/16" | 4" | 7 3/8" | 3/4" | 5/16" | Nylon Plastic | Aluminum | 0000000 | 000000 |
Double-Groove Without Bearing | ||||||||||||
Swivel Eye | ||||||||||||
D | 5/16" | 1,100 | 1" | 1 31/32" | 1" | 3 3/4" | 1/2" | 1/4" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
D | 5/16" | 1,250 | 1 1/4" | 2 1/32" | 1 1/4" | 4 1/2" | 9/16" | 1/4" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
D | 7/16" | 1,850 | 2" | 2 29/64" | 2" | 5 1/2" | 3/4" | 5/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel is more corrosion resistant than steel.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | Housing Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Each | ||
Single-Groove Without Bearing | ||||||||||||||
1 | 1/4" | Not Rated | 2" | 1" | 3 1/4" | 2 1/2" | Steel | Steel | 2 | 1/4" | 2 1/4" | __ | 0000000 | 000000 |
1 | 3/8" | Not Rated | 3" | 1 5/32" | 4 3/4" | 3 1/2" | Steel | Steel | 2 | 1/4" | 3 5/8" | __ | 0000000 | 00000 |
2 | 3/16" | Not Rated | 2 1/2" | 1 3/32" | 3 3/4" | 2 3/4" | Steel | Steel | 4 | 3/16" | 3 3/16" | 7/16" | 0000000 | 00000 |
2 | 1/4" | Not Rated | 3 1/4" | 1 7/16" | 4 3/4" | 3 3/8" | Steel | Steel | 4 | 1/4" | 4 1/8" | 13/16" | 0000000 | 00000 |
2 | 3/8" | Not Rated | 4 1/2" | 1 5/8" | 6 5/16" | 4 3/4" | Steel | Steel | 4 | 1/4" | 5 1/2" | 13/16" | 0000000 | 00000 |
3 | 1/4" | Not Rated | 2" | 7/8" | 4 1/8" | 15/16" | Steel | Steel | 4 | 1/4" | 3 7/16" | 13/16" | 0000000 | 00000 |
3 | 3/8" | Not Rated | 3" | 1 1/8" | 5 9/16" | 1 1/8" | Steel | Steel | 4 | 1/4" | 4 3/4" | 1 1/16" | 0000000 | 00000 |
4 | 3/16" | Not Rated | 2 1/2" | 15/16" | 4" | 2 1/2" | Steel | Steel | 4 | 3/16" | 3 1/2" | 9/16" | 0000000 | 00000 |
4 | 1/4" | Not Rated | 3 1/4" | 1 1/16" | 5" | 3 1/4" | Steel | Steel | 4 | 3/16" | 4 3/8" | 13/16" | 0000000 | 00000 |
4 | 3/8" | Not Rated | 4 1/2" | 1 1/8" | 7" | 4 1/2" | Steel | Steel | 4 | 1/4" | 6 1/4" | 3/4" | 0000000 | 00000 |
Single-Groove With Bearing | ||||||||||||||
5 | 3/16" | 150 | 1 1/4" | 9/16" | 1 1/4" | 1 3/4" | Steel | Stainless Steel | 3 | 3/16" | __ | __ | 0000000 | 00000 |
Double-Groove Without Bearing | ||||||||||||||
6 | 3/16" | Not Rated | 2 1/2" | 1 7/16" | 3 3/4" | 2 3/4" | Steel | Steel | 4 | 3/16" | 3 1/4" | 7/8" | 0000000 | 00000 |
6 | 1/4" | Not Rated | 3 1/4" | 1 7/8" | 5" | 3 1/2" | Steel | Steel | 4 | 1/4" | 4 1/8" | 1 1/16" | 0000000 | 00000 |
7 | 1/4" | Not Rated | 3 1/4" | 1 7/8" | 5" | 3 1/4" | Steel | Steel | 4 | 3/16" | 4 7/16" | 3/4" | 0000000 | 00000 |
Also known as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing—a free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
For technical drawings and 3-D models, click on a part number.
Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Hook Opening Wd. | Hook Thick. | Eye Dia. | Eye Thick. | Material | Housing Material | Each | |
Without Bearing | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Latching Hook | ||||||||||||||
A | 3/8" | 4,000 | 3" | 1 1/2" | 3" | 10 5/16" | 1" | 3/4" | __ | __ | Steel | Steel | 0000000 | 0000000 |
A | 1/2" | 8,000 | 4 1/2" | 2 1/16" | 4 1/2" | 14 3/4" | 1 5/16" | 1 1/16" | __ | __ | Steel | Steel | 0000000 | 000000 |
Swivel Shackle | ||||||||||||||
B | 3/8" | 4,000 | 3" | 1 1/2" | 3" | 10 3/8" | __ | __ | 1 1/4" | 1/2" | Steel | Steel | 0000000 | 000000 |
B | 1/2" | 8,000 | 4 1/2" | 2 3/8" | 4 1/2" | 15 5/16" | __ | __ | 1 13/16" | 3/4" | Steel | Steel | 0000000 | 000000 |
B | 3/4" | 16,000 | 6" | 2 3/8" | 6" | 20 3/16" | __ | __ | 2 1/2" | 1" | Steel | Steel | 0000000 | 000000 |
Rigid Clevis | ||||||||||||||
C | 3/8" | 4,000 | 3" | 1 1/2" | 3" | 4 7/8" | __ | __ | __ | __ | Steel | Steel | 0000000 | 000000 |
Rigid Eye | ||||||||||||||
D | 1/8" | 975 | 1" | 7/16" | 1" | 2 5/8" | __ | __ | 3/8" | 1/8" | Nylon Plastic | Stainless Steel | 00000000 | 00000 |
D | 1/4" | 1,850 | 1 3/4" | 1/2" | 1 3/4" | 3 1/4" | __ | __ | 3/8" | 3/16" | Nylon Plastic | Stainless Steel | 00000000 | 00000 |
With Bearing | ||||||||||||||
Rigid Clevis | ||||||||||||||
C | 1/2" | 8,000 | 4 1/4" | 2" | 4 1/4" | 7 3/4" | __ | __ | __ | __ | Steel | Steel | 0000000 | 000000 |
Customize the groove and bore to fit your application. The center of the pulley has a pilot hole so you can drill a bore to match a specific shaft size. Nylon is easy to machine yet resists impact and corrosion.
Also known as groove gauges, these measure the groove of your pulley to check for wear as well as determine the correct wire rope size.
Includes | Each | |
14 Gauges in 1/4" to 1 1/2" Wire Rope Diameters | 0000000 | 000000 |