Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Braided from thick plastic strands, this sleeving has excellent abrasion resistance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Tested to meet MIL-STD-202, this sleeving meets performance standards for flame retardance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Tight braiding makes this sleeving resistant to fraying when cut with scissors. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.

Use this PTFE sleeving in applications where temperatures reach up to 500° F.

Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.

With a temperature rating of 1800°F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.

A blend of Aramid and fiberglass gives this sleeving excellent abrasion resistance. It can withstand temperatures up to 650° F

Made of Nomex fabric, this sleeving has excellent tear resistance and better abrasion resistance than nylon sleeving.

Wrap this sleeving around wire, cable, and hose without disconnecting them. It has a slit along the entire length and wraps over itself to stay closed without an adhesive strip or other closure.

Zip this sleeving around wire, cable, or hose that are connected at both ends to quickly bundle them.

Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying.

Made of nylon, this sleeving is the most impact- and abrasion-resistant slit corrugated sleeving we offer. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them.

This sleeving reflects heat away from contents and withstands temperatures up to 300°F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

This sleeving reflects heat away from contents and withstands temperatures up to 900°F. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility.

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

This sleeving absorbs UV light, so it can be used in direct sunlight without getting damaged. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Made with a self-extinguishing additive, this sleeving will not produce fumes when exposed to open flame or high temperatures. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Made of neoprene rubber, this sleeving has excellent abrasion resistance. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

Protect fiber optic cable with this small-diameter conduit.

Preventing wear and cracks, these grommets shield the sections of your conduit that rub and bang against nearby components.

Visually identify different runs of wire and cable in machine and equipment wiring.

When used with liquid-tight fittings, this conduit seals out liquid. The steel core provides crush resistance, and the cover is UV light resistant.

Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.

The spiral design makes this conduit more flexible than abrasion-resistant liquid-tight flexible plastic conduit.

Covered with a copper braid, this conduit protects wire and cable from electromagnetic interference (EMI) caused by motors and other equipment.

Join pieces of conduit.

Join pieces of conduit.

Join pieces of conduit.

Also known as intermediate metallic conduit (IMC), this is lighter in weight than thick-wall (rigid) steel conduit, yet it has the same strength.

The most corrosion-resistant thin-wall conduit we offer, use this along walls and ceilings in food-processing and chemical plants.

Join pieces of conduit.

Visually identify different runs of wire and cable along walls and ceilings with this conduit that has a painted exterior.

In addition to continuous-motion applications such as robotics, this conduit is suitable for high-vibration applications.

Insert and remove cable at any point along the length of this open-top, hook-shaped raceway.

Surface mount with the adhesive back to route low-voltage data and control cable where you can't get inside walls.

In areas exposed to washdowns, chemicals, and corrosion, install this stainless steel raceway system that has gaskets at the connection points.

Gaskets on the covers and at connection points protect against dust as well as seeping oil and coolant.

With a top that overhangs the cover, this raceway keeps out rain. It is rated NEMA 3R for protection from liquids and light splashing.

These cable ramps are strong enough to withstand equipment traffic.

These cable ramps handle heavy pedestrian and equipment traffic.

Use in areas with light pedestrian traffic.

With the widest channels of any of our cable ramps, these ramps can span large cable, hose, and pipe.

Narrower slots and fingers create more access and routing points than on standard slotted wire duct.

This wire duct completely encloses wire and cable.

Use this tubing in applications where temperatures reach up to 500° F. It's often used to insulate electronic components.

Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable, or where cables exit from conduit.

The smallest heat-shrink tubing we offer, this tubing protects wire with a 0.017" and smaller diameter.

Organize and route wire and cable in an enclosure—this tubing bundles wires together while allowing them to reach different connection points.

This tubing creates a tight seal over irregularly shaped objects.

Made of woven polyolefin/polyester fabric, this tubing has excellent abrasion resistance so it can be dragged over rough surfaces without damage.

Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.

Access connections more easily than with standard heat-shrink tubing. Make a small slit in this tubing to peel it away.

Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.

Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.

With thin walls, this tubing shrinks faster than other high-temperature tubing. It withstands up to 500° F.

Extra-thick walls provide more protection against abrasion and tears than standard high-shrink-ratio tubing. This tubing shrinks down to 1/6th of its original ID, so it creates a tight seal over irregularly shaped objects.

This PTFE tubing withstands temperatures up to 450° F and has an inner lining that creates a water-resistant seal when heated.

Protect bus bars and other high-voltage devices—this tubing withstands voltages up to 5,000 volts.

Use this wrap with heat-shrink tubing to create a moisture-resistant seal. Apply it like tape around wire and cable, then slide the tubing over the wrap. The wrap melts when tubing is heated and bonds to the underlying surface.

Keep general purpose tubing in a variety of sizes on hand.

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.

This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.

Often used to send signal and data to order pickers and cranes, this cable withstands continuous motion applications without degrading data or signal transmission.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to transmit audio, video, and data signals.

Send data between computers, servers, and switches in an office or workstation.

Often used in automated applications that require continuous motion, this cable sends data between computers, servers, and switches without degrading signal transmission.

Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.

Send signal and data to operate, measure, or regulate automated equipment such as conveyors and CNC machines.

A thick rubber insulation resists cuts and abrasion, so this cable can be pulled over rough surfaces without damaging the wires inside.

This cable can be stretched by about 40% and return to its original length, making it useful for applications where cable is in motion. It's often sewn into garments or used with equipment that must be worn.

Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it in low-current circuits such as intercoms and security systems.

In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.

The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission

The shielding in this wire blocks signal interference from nearby equipment and devices. When pulled lengthwise, it extends 40% and then returns to its original length, so it's useful for high-vibration applications.

Step on or roll carts and platform trucks over these M12 cords without crushing them.

The shielding blocks signal interference from nearby equipment and devices.

Connect devices such as computers, printers, and mobile devices.

Rated IP67, these cords withstand washdowns and temporary submersion. Connect them to a USB device inside an enclosure.

Often used in robotics, packaging, conveyors, and other applications with constant movement and high temperatures, these silicone rubber cords bend and flex at temperatures up to 325° F.

With a flange on the socket end, you can mount these cords in a panel cutout to move data between computers, printers, and mobile devices.

These cords contain a single pair of twisted wires, making them lighter and more flexible than other Ethernet cords. They’re good for transportation, robotics, and automation applications.

Play audio from one source on two different speakers.