Cable Stops

	For Wire Rope Diameter For Wire Rope Diameter

	Material Material

	Attachment Type Attachment Type


Stop	Loop

	For Sleeve Type For Sleeve Type


Compression	Stop

	For Wire Rope Construction For Wire Rope Construction


7 × 19 Strand Core	7 × 7 Strand Core

7 × 19 IWRC	1 × 19 Strand Core

1 × 7 Strand Core	19 × 7 Strand Core

6 × 7 Fiber Core	3 × 7 Hollow Core

18 × 7 IWRC	6 × 19 IWRC

6 × 37 IWRC	6 × 26 IWRC

6 × 19 Fiber Core	3 × 7 IWRC

7 × 7 IWRC

	Type Type


Rope Clamp	Compression Sleeve

Thimble

	For Sleeve Material For Sleeve Material

Copper

Aluminum

Stainless Steel

	For Wire Rope Material For Wire Rope Material

Steel

Stainless Steel

	Application Application

Not for Lifting

For Lifting

	Capacity Capacity

30% of the Rope's
Capacity

40% of the Rope's
Capacity

80% of the Rope's
Capacity

85% of the Rope's
Capacity

90% of the Rope's
Capacity

95% of the Rope's
Capacity

100% of the Rope's
Capacity

Not Rated

	Required Installation Tool Required Installation Tool

	OD OD

	Sleeve Length Sleeve Length

	Overall Length Overall Length

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Compression Sleeve Material Compression Sleeve Material

Copper

Aluminum

	For Rope Diameter For Rope Diameter

	Finish Finish

	Required Number of Compressions Required Number of Compressions

	Stop Sleeve Material Stop Sleeve Material

Copper

Aluminum

	Compressed OD Compressed OD

373 Products

Wire Rope Stops—Not for Lifting

Forged One-Piece Wire Rope Clamps—Not for Lifting

Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.

Crosby Forged Single-Saddle
Wire Rope Clamps—Not for Lifting

These clamps must be oriented with the saddle on the long (live) end and the U-bolt on the short (dead) end. They’re also known as wire rope clips.

Forged Stainless Steel Single-Saddle
Wire Rope Clamps—Not for Lifting

These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.

Crosby Forged Double-Saddle
Wire Rope Clamps—Not for Lifting

Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.

Quick-Adjust Wire Rope Clamps—Not for Lifting

Create a loop by feeding the wire rope through the clamp and tighten the set screw to secure it in place. Loosen the set screw to quickly adjust the loop. Also known as Gripple rope clamps. They are for use in noncritical applications, such as fencing.

Easy-Install Wire Rope Clamps—Not for Lifting

Make a removable loop without specialty tools for use in noncritical applications, such as fencing. Also known as tiller clamps.

Cast Wire Rope Clamps—Not for Lifting

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Wire Rope Clamps with Thimbles—Not for Lifting

A clamp and thimble in one convenient fitting simplifies installation while providing support and fray protection to the wire rope loop. Use a torque wrench to tighten the clamp.

Wire Rope Clamp and Thimble Kits—Not for Lifting

Kits include clamps and thimbles to support a wire rope loop and prevent it from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.