We will reply to your message within an hour.
Bundle and secure cable, wire, and hose.
Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.
Protect sensitive electronic equipment from static buildup.
Use different colored ties to identify bundles at a glance. A release tab makes these ties easy to remove and use again.
The ripple in the body prevents over tightening and allows for expansion to protect material that frequently changes size, such as heat cable.
The buckle allows you to cinch these ties tight.
Bundle cables outdoors with these ties that withstand exposure to UV rays and water.
The hook and loop on these ties holds more tightly than other hook and loop.
These ties stretch to hold material tightly without slipping.
Ties are made from heat-resistant fabric to withstand high temperatures.
Mount bundles to surfaces with a screw or fastener. Since the mounting grommet on these ties is not accessible after material has been bundled, these ties are best for a permanent installation.
Stick these ties to any smooth, clean surface.
Also known as lashing straps, use these to tightly secure material.
The hook on these straps quickly connects to the buckle—no need to spend time threading the end through the buckle.
Hold bundles tightly with these cinching straps that conform to the shape of the material.
This chemical-resistant tape has adhesive on both sides.
Use this tape to attach components to heat sinks and metal chassis walls in place of screws and other mechanical fasteners. It conducts heat away from sensitive electronics.
Quickly conduct heat away from electronic components. Kapton® polyimide gives this tape excellent electrical isolation.
Made of polyester fabric with a copper/nickel filler, this tape is highly conductive throughout, including the adhesive.
Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.
Our most slippery tape, the slick surface allows items to glide smoothly over it.
A strong, thick layer of Teflon® PTFE makes this tape tougher than standard Low-Friction Tape Made with Teflon® PTFE.
Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.
This tape provides a slick surface along with excellent resistance to electrical current.
Cover surfaces up to 60" wide.
A high-tack rubber adhesive on these hook and loop strips sets quickly in moist conditions.