Cable and Hose Trays
For ease of installation and accessibility, lay cable and hose in trays instead of pulling it through conduit or raceway. These tray systems allow excellent ventilation and prevent sagging while routing. They support up to 280 lbs. per foot (based on a tray support, such as hanging clamps or a hanging bar, every 8 feet).
Trays, horizontal tees, 90° horizontal bends, 90° vertical inside bends, and 90° vertical outside bends include straight connectors for joining sections.
Corrosion-Resistant Stainless Steel Formable Cable and Hose Trays
These are the most corrosion-resistant tray systems we offer for routing cable and hose in configurations such as curves, slopes, and tees. Cut, bend, and connect the wire mesh trays. They are a lightweight option for organizing bundles of cable and hose while keeping them accessible.
Straight connectors join two trays in a straight line.
Clamp connectors can be used to join two trays after you have bent them. You can also use these connectors to join trays in a straight line.
Zinc-Plated Steel Formable Cable and Hose Trays
The zinc plating on these tray systems offers good corrosion resistance. Cut, bend, and connect the wire mesh trays to route cable and hose in configurations such as curves, slopes, and tees. They are a lightweight option for organizing bundles of cable and hose while keeping them accessible.
Use bolt cutters to cut trays to the size you need. The maximum capacity is based on mounting brackets spaced every 6 feet.
Clamp connectors join two trays in a straight line or two trays after you have bent them.
Steel Formable Cable and Hose Trays
Cut, bend, and connect these wire mesh tray systems to route cable and hose in configurations such as curves, slopes, and tees. They are a lightweight option for organizing bundles of cable and hose while keeping them accessible.
All components are painted black to blend into dark backgrounds.
Clamp connectors join two trays in a straight line or two trays after you have bent them.
Hanging clips attach to the sides of a tray to suspend it from 1/4"-20 or 3/8"-16 threaded rod. Threaded rod, two nuts, and two washers are required for each clip and are not included.
| For Tray Wd. | Material | Color | Mounting Hardware Included | Pkg. Qty. | Pkg. | |
| 2", 4", 6", 8" | Painted Steel | Black | Yes | 2 | 00000000 | 00000 |