About Heaters for Pipes and Tubes
Self-Regulating Heat Cable—Adjusts its heat output in response to surface as well as surrounding temperatures.
Constant-Wattage Heat Cable—Always puts out the designated amount of watts/ft., regardless of the surrounding temperature.
More
Micro M12 Screw-Together Connectors
Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment. Their poles and keyways adhere to standard coding layouts, reducing the chance you’ll mismatch connectors.
A- and C-coded connectors send both power and signal, while K-, L-, S-, and T-coded connectors only send power. Choose A-coded connectors for AC and DC sensors, actuators, motors, light curtains, and other devices. They’re often used to connect equipment to IO Link controllers and within Profibus, DeviceNet, and other fieldbus systems. 90° elbow connectors run your cord along the side of equipment, so they fit behind machines and in tight spaces.
Connectors with screw terminals hold wire by tightening a screw. IP67 and IP68 rated connectors can withstand brief submersion. Add caps to protect connectors and maintain their IP and NEMA ratings when not in use.
Note: Sockets and female receptacles may have extra holes on their face that are not used.
Housing Thread | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Poles | Coding | Face Dia. | Voltage | Current | For Wire Gauge | For Cable OD | Housing Material | Size | Pitch, mm | Type | Max. Temp., °F | Environmental Rating | Each | |
| 5 | A | 0.3" | 30V AC/36V DC | 4A | 18 | 0.13"-0.26" | Nylon Plastic | M12 | 1 | Metric | 185° | IP67 | 0000000 | 000000 |
Housing Thread | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Poles | Coding | Face Dia. | Voltage | Current | For Wire Gauge | For Cable OD | Housing Material | Size | Pitch, mm | Type | Max. Temp., °F | Environmental Rating | Each | |
| 5 | A | 0.3" | 30V AC/36V DC | 4A | 18 | 0.13"-0.26" | Nylon Plastic | M12 | 1 | Metric | 185° | IP67 | 0000000 | 000000 |
Housing Thread | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Poles | Coding | Voltage | Current | Face Dia. | For Wire Gauge | For Cable OD | Housing Material | Size | Pitch, mm | Type | Max. Temp., °F | Environmental Rating | Each | |
| 5 | A | 30V AC/36V DC | 4A | 0.3" | 18 | 0.13"-0.26" | Nylon Plastic | M12 | 1 | Metric | 185° | IP67 | 0000000 | 000000 |
Housing Thread | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Poles | Coding | Face Dia. | Voltage | Current | For Wire Gauge | For Cable OD | Housing Material | Size | Pitch, mm | Type | Max. Temp., °F | Environmental Rating | Each | |
| 5 | A | 0.3" | 30V AC/36V DC | 4A | 18 | 0.13"-0.26" | Nylon Plastic | M12 | 1 | Metric | 185° | IP67 | 0000000 | 000000 |
Ultra-Flexible Constant-Wattage Heaters for Pipes and Tubes
Wrap the flexible heating element around small-diameter pipes and tubes or pack it into tight spaces. These heaters maintain a consistent heat output along the entire length of the cable, regardless of the environmental temperature. All require a temperature switch or controller to regulate heat output. They do not produce an electromagnetic field, so they can be used near electronics.
Note: Only install these heaters in accessible locations; do not install them behind walls, underground, or in other difficult-to-access areas. Use fiberglass tape or heat-transfer putty to install them directly on surfaces that are free of dirt, grease, and rough edges. Do not use electrical tape, duct tape, metal bands, or wire. To prevent heat loss and protect heaters from moisture and corrosion, wrap them with fiberglass insulation.
| Lg., ft. | Wattage, W | Watt Density | Current, A | Wd. | Thick. | Environment Temp. Range, °F | Cable Cover Material | For Surface Material | Each | |
36V DC | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 9 | 3W/ft. | 0.3 | 0.12" | 0.06" | -30° to 220° | Polymer-Based Fiber | Metal, Plastic | 0000000 | 000000 |
| 6 | 18 | 3W/ft. | 0.5 | 0.12" | 0.06" | -30° to 220° | Polymer-Based Fiber | Metal, Plastic | 0000000 | 00000 |
| 9 | 27 | 3W/ft. | 0.8 | 0.12" | 0.06" | -30° to 220° | Polymer-Based Fiber | Metal, Plastic | 0000000 | 00000 |
| 12 | 36 | 3W/ft. | 1 | 0.12" | 0.06" | -30° to 220° | Polymer-Based Fiber | Metal, Plastic | 0000000 | 000000 |