Cadmium-Plated Steel Washers

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Bristle Material Bristle Material

Brass

	Washer Material Washer Material

Steel

	Cage Material Cage Material

Steel

Plastic

Bronze

	Ball Material Ball Material

Steel

	Handle Material Handle Material

Plastic

Wood

Steel

	Body Material Body Material

Steel

Plastic

	Spring Material Spring Material

Steel

	Block Material Block Material

	Screen Material Screen Material

Stainless Steel

Steel

	Core Material Core Material

Steel

	Hose Material Hose Material

Steel

	Housing Material Housing Material

Steel

Forward

How can we improve?

8,712 Products

Washers

General Purpose Washers

Metric General Purpose Washers

Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.

Oversized Washers

Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.

Metric Oversized Washers

Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses. Use them to cover oversized holes, hold heavy fastening loads, or as spacers and levelers.

Mil. Spec. Washers

Choose these washers for their adherence to strict military standards for material and construction.

SAE Washers

SAE washers generally have a smaller ID and OD than USS washers.

USS Washers

USS washers generally have a larger ID and OD than SAE washers.

ASME Washers for Soft Material

Also known as Type B washers, these distribute your fastener's load over a larger surface area than other washers to minimize damage to soft materials.

Washers with Material Certification

These washers come with a traceable lot number and a physical and chemical test report.

Washers for Structural Applications

Designed for use with A325 structural screws, studs, and nuts, these washers are often used for construction and exterior building applications.

Tension-Indicating Washers for Structural Applications

When you’ve applied the correct tension, these washers release an orange dye as a visual indicator.

Metric Washers for Structural Applications

These thick washers are designed to support structural screws, studs, and nuts.

Washers for Blind Rivets

Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.

Countersunk Washers

Flat and oval head screws sit flush within these washers for a neat, finished appearance.

Metric Countersunk Washers

Flat and oval head screws sit flush within these metric washers for a neat, finished appearance.

Finishing Countersunk Washers

Metric Finishing Countersunk Washers

Clipped Washers

Clipped to fit where standard washers can't, these won't rotate when you position the flat edge against a flat surface.

Oversized Clipped Washers

With greater diameters and/or thicknesses than general purpose washers, these washers cover oversized holes or act as spacers and levelers. Clipped to fit where standard washers can’t, they won’t rotate when you position the flat edge against a flat surface.

Double-Clipped Washers

Clipped on both sides to fit where standard washers can't, these won't rotate when you position the flat edges against a flat surface.

Square Washers

Square washers fit into slots and channels and have flat sides to keep them from rotating.

Square Washers for Blind Rivets

Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.

Sleeve Washers for Soft Material

Reinforce holes in soft material to keep them from collapsing around screws.

Easy-Install Slotted Washers

A slot in the side allows you to install and remove these washers without completely disassembling your joint.

Angled-Edge Washers for
Toggle Clamp Holding Screws

Use on clamps with open arms to keep the holding screw in place.

Angled-Edge Washers for Tie-Down Straps

Use the angled edges to hold and align tie-down straps.

Steel Washers for Rigid Insulation

Steel washers provide a stronger bearing surface than plastic washers

Cup Washers for Oversized Holes

Cover oversized holes and the ends of tubes and pipe with these cup-shaped washers.

Washers for Plaster

Repair sagging, cracked plaster with these washers. The holes allow plaster to flow through to form a secure bond between the washer and the wall.

Curved Washers

Also known as saddle washers, these curved washers fit round surfaces such as tubes and pipe.

Washers for Foam Insulation

These washers have prongs that pierce foam insulation so they stay in place.

Split Lock Washers

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

Metric Split Lock Washers

Mil. Spec. Split Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Metric Split Lock Washers for Socket Head Screws

Split Lock Washers for Socket Head Screws

Oversized Split Lock Washers

Compared to standard split lock washers, these are thicker and have larger outside diameters.

Spring Lock Washers

Belleville Spring Lock Washers

Also known as conical washers, these have a slightly cupped shape that gives them spring-like flexibility to grip tighter than split and tooth lock washers.

Belleville Spring Lock Washers for Socket Head Screws

These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws.

Spring Lock Washers for Slotted Bearing Nuts

Designed for use with bearing nuts, these lock washers have a conical shape that presses like a spring against bearings, bushings, gears, and pulleys to hold them in place on your threaded shaft or spindle.

Metric Spring Lock Washers

The arched shape of these washers presses up against a bolt and down against a nut to prevent loosening from wear, vibration, or temperature changes.

Tooth Lock Washers

External-Tooth Lock Washers

Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip.

Metric External-Tooth Lock Washers

Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.

Mil. Spec. External-Tooth Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Tight-Grip External-Tooth Lock Washers

The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold.

Countersunk Tight-Grip External-Tooth Lock Washers

To keep 90° countersunk screws from loosening in vibration applications, the teeth on these washers bite further into the screw head and joint than standard external-tooth lock washers for a more secure hold.

Countersunk External-Tooth Lock Washers

The teeth on these washers firmly grip heads of 82° flat head countersunk screws.

Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with fasteners that have small heads, such as fillister and cheese head screws.

Metric Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with metric fasteners that have small heads, such as fillister and cheese head screws.

Mil. Spec. Internal-Tooth Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Internal-Tooth Lock Washers for Soft Material

Slightly domed with an oversized outside diameter, these washers distribute your fastener's load over a larger surface area than other internal-tooth lock washers to limit damage to soft material.

Internal-/External-Tooth Lock Washers

The combination of internal and external teeth boosts gripping power to maintain a tight hold and provide more vibration resistance than other tooth lock washers. Use with fasteners that have heads large enough to make contact with the external teeth, such as pan, button, and binding head screws.

Wedge Lock Washers

Comparable to NORD-LOCK® and Sherex TEC Series washers, these two-piece washers provide more locking power than split, tooth, and spring lock washers. Wedges on the inside lock the two pieces together, and serrations on the exterior grip surfaces to resist loosening from high vibration and shifting.

Tab Lock Washers

Metric Tab Lock Washers

Bend the tab of these metric lock washers against the flats of a hex nut or bolt head to prevent the fastener and washer from turning and loosening due to vibration, wear, or changes in temperature.

Tab Lock Washers

Bend one tab against the side of the mounting surface and the other tab against the flats on a bolt or nut to prevent both the fastener and washer from turning and loosening in high-vibration applications, such as a motor mount.

Square-Neck Bolt Lock Washers

Designed for use with square-neck bolts such as carriage bolts, these washers have teeth that dig into wood and other soft material to prevent rotation.

Metal-Bonded Sealing Washers

High-Pressure-Rated Metal-Bonded Sealing Washers

Able to withstand pressure greater than 3,000 psi, these one-piece bonded washers create the tightest seals.

Metric High-Pressure-Rated
Metal-Bonded Sealing Washers

Able to withstand pressure greater than 7,000 psi, these one-piece bonded washers create the tightest seals.

Pressure-Rated Metal-Bonded Sealing
Washers for Nuts and Washers

Also known as thread-sealing washers, use these under nuts and other washers.

Metal-Bonded Sealing Washers

Create a stronger seal than metal or rubber alone. These one-piece washers are metal for strength with a bonded rubber seal that creates a tight grip.

Leveling and Wave Washers

Triple-Wave Washers

With three points of surface contact, these washers provide more stability than single-wave washers.

Metric Single-Wave Washers

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.

Single-Wave Washers

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.

Leveling Washers

Metric Leveling Washers

Leveling Washers for I-Beams

Metric Leveling Washers for I-Beams

Shims

Ring Shims

Precisely align, level, and adjust spacing on fasteners and shafts with these shims.

Ring Shim Sets

Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.

Wide-Rim Ring Shims

Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.

Tight-Fit Ring Shims

For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.

Shims for Shortening Screw Shoulders

Slide these shims under the screw head to shorten the shoulder length.

Shims for Lengthening Screw Shoulders

Spin these shims onto screw threads to extend the shoulder length.

Shims for D-Profile Shafts

These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

Shim Sets for D-Profile Shafts

Be prepared with shims in a variety of thicknesses. These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

Shims for Button Dies

Place these shims under sharpened dies to restore their original height and extend their life.

Shims for Keyed Shafts

Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.

Shim Sets for Keyed Shafts

Be prepared with shims in a variety of thicknesses. Also known as arbor spacers, these shims are notched to fit over keyed shafts.

Disc Shims

Use these round shims as they are, or punch out the middle to create the ID you need.

Multi-Slotted Shims

Use a single shim on feet or positioning arms that are secured with multiple fasteners. The slots let you insert, remove, and adjust the shims without disassembling your machinery. Also known as finger shims.

Made-to-Order Shims

Send us a drawing, and we'll cut your custom shim.

Made-to-Order Peel-Away Layered Shims

Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Unthreaded Spacers

Zinc-Plated Steel Unthreaded Spacers

The zinc plating provides some corrosion resistance.

Polished Unthreaded Spacers

With their mirror-like finish, these are the go-to spacers when appearance matters.

Made-to-Order Unthreaded Spacers

Choose the OD, ID, length, and material and we will accommodate your unique spacer needs.

Slotted Unthreaded Spacers

An economical alternative to standard unthreaded spacers.

Unthreaded Spacers for Keyed Shafts

Also known as arbor spacers, these are notched to space components on a keyed shaft.

Washer Assortments

USS Washer Assortments

USS washers generally have a larger ID and OD than SAE washers.

Washer Assortments

SAE Washer Assortments

SAE washers generally have a smaller ID and OD than USS washers.

Oversized Washer Assortments

These washers have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.

Tooth Lock Washer Assortments

Teeth bite into the joint for a tighter grip than split lock washers.

Split Lock Washer Assortments

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

Fastener Maintenance Assortments

Ring Shim Assortments

Shim Assortments for Shortening Shoulder Screws

Slide onto a shoulder screw to shorten the length of the shoulder.

Shim Assortments for Button Dies

Place these shims under sharpened dies to restore their original height and extend the life of the dies.

Ring Shim Assortments

Use round shims to precisely align, level, and adjust spacing on shafts and machinery.

Shim Assortments for Lengthening Shoulder Screws

Spin these tight-fitting shims onto your screw's threads to lengthen the shoulder.

Retaining Ring Assortments

External and Internal Retaining Ring Assortments

Assortments include pliers to install external and internal rings.

External and Internal Spiral Retaining Ring Assortments

Wind these retaining rings into a groove—no tools required for installation.

External, Internal, and Side-Mount
Retaining Ring Assortments

These assortments include pliers to install external and internal rings.

Side-Mount External Retaining Ring Assortments

Also known as E-Style and C-style rings, slide these into the groove from the side of the shaft. They provide a wider shoulder than other external retaining rings for a larger retaining surface.

External and Side-Mount Retaining Ring Assortments

Assortments include pliers to install external rings.

External Retaining Ring Assortments

Pull these rings open with retaining ring pliers, pass over the end of a shaft, and release to spring into a groove.

Internal Retaining Ring Assortments

Pull ring ends together with retaining ring pliers and place into the bore of a shaft or housing.

Push Ring Assortments

External Push Ring Assortments

Internal Push Ring Assortments

External Retaining Rings

Open these rings, pass them over the end of a shaft, and release to spring into the groove.

Heavy Duty External Retaining Rings

Thicker than standard external retaining rings, these rings withstand greater force.

Mil. Spec. External Retaining Rings

These rings meet military specification MS 16624.

Inverted External Retaining Rings

For a smooth profile and better clearance than standard external retaining rings, the lugs on these rings point inward.

Self-Locking External Retaining Rings

No groove is required for these rings—their thick profile helps them grip the shaft.

Bowed External Retaining Rings

The curved design of these rings works like a spring, taking up play for a tight hold.

Push-On External Retaining Rings

No groove required—press these rings onto the end of a shaft for a firm grip.

Rectangular Push-On External Retaining Rings

Also known as flat-style speed nuts, these have a large surface to distribute loads better than standard and flanged external push rings.

Flanged Push-On External Retaining Rings

The wide flange provides better load distribution than standard external push rings and can be used to cover oversized holes. Also known as thread cutting nuts.

Side-Mount External Retaining Rings

Also known as E-style rings.

Heavy Duty Side-Mount External Retaining Rings

These rings are reinforced to withstand faster rotation than other side‐mount retaining rings. Also known as reinforced E‐style rings.

Low-Clearance Side-Mount External Retaining Rings

Also known as C-style and crescent rings, these rings have a small shoulder to fit in tight spaces.

Wide-Grip Side-Mount External Retaining Rings

Also known as poodle rings, these thick rings have "ears" that form a large retaining surface to withstand stronger forces than other side-mount retaining rings.

Bowed Side-Mount External Retaining Rings

Also known as bowed E-style rings, these have a curved design that works like a spring, taking up play for a tight hold.

Heavy Duty Spiral External Retaining Rings

Thicker than standard spiral rings, these rings withstand greater forces.

Spiral External Retaining Rings

These coiled rings can be wound into place on a shaft without tools.

Single-Turn Spiral External Retaining Rings

Slide these rings into place with one twist—no tools required—for applications with high thrust loads.

Speared Ends External Retaining Rings

Often used with small engines, heavy equipment, and power transmission, these external retaining rings have speared ends to help you install and remove them.

Low-Clearance External Retaining Rings

Also known as constant-section rings, these rings have open ends and a profile that does not taper like other external retaining rings. Use them with linear bearings on support rail shafts.

Crimp-On External Retaining Rings

Also known as X-washers, place these rings into the groove and squeeze tight with pliers to form a 360° closure.

Clip-On External Retaining Rings

Slide these rings into a groove near the end of the shaft and the tab locks them in place.

Internal Retaining Rings

Squeeze these rings to place them in the groove inside a bore or housing.

Internal Teeth Retaining Rings

With teeth along the inside, these retaining rings hold chamfered shafts inside the housing of your equipment.

Bowed Internal Retaining Rings

The curved design of these rings works like a spring, taking up play for a tight hold.

Inverted Internal Retaining Rings

For a smooth bore and better clearance than standard internal retaining rings, the lugs on these rings face outward.

Heavy-Duty Internal Retaining Rings

Thicker and stronger than standard internal retaining rings, these withstand greater thrust loads.

Single-Turn Spiral Internal Retaining Rings

Slide these rings into place by hand with a single twist for applications with high thrust loads.

Heavy Duty Spiral Internal Retaining Rings

Thicker than standard spiral rings, these rings withstand greater forces.

Spiral Internal Retaining Rings

These coiled rings can be wound into place inside a bore or housing without tools.

Push-On Internal Retaining Rings

No groove required—these rings have teeth that firmly grip the bore.

Nuts

Flanged Push Nuts

A flange distributes the load over a large area and reduces stress where the nut meets the material surface.

Round Push Nuts

With flexible teeth that slide smoothly over threads of any pitch, these push nuts can be used alone for light-duty applications or as a jam nut.

Metric Round Push Nuts

These metric push nuts can be used as a standalone for light-duty applications or as a jam nut.

Rectangular Push Nuts

Also known as flat-style speed nuts, these have large sides, so they're easy to push over threads by hand.

Rectangular Push Nuts for Tapping Screws

Hex Speed Nuts

Hex speed nuts can be gripped with a wrench for ease of removal.

Steel Snap-In Nuts

Snap these nuts into square holes in thin materials.

Press-Fit Captive Panel Screws

Install in soft material such as aluminum and low-carbon steel at least 0.036" thick with an arbor press or similar pressure tool.

Quarter-Turn Captive Panel Screws

Rounded Head Quarter-Turn Captive
Panel Screws with Front Press-Fit Nut

Press these rounded head nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. A quarter-turn locks and releases access panels, doors, and covers.

Wing Head Quarter-Turn Captive
Panel Screws with Front Press-Fit Nut

Press these wing head nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. A quarter-turn locks and releases access panels, doors, and covers.

Rounded Head Quarter-Turn Captive
Panel Screws with Back Press-Fit Nut

Press these rounded head nuts into the backside of a panel in applications where you have access to both sides of the panel. A quarter-turn locks and releases access panels, doors, and covers.

Wing Head Quarter-Turn Captive
Panel Screws with Back Press-Fit Nut

Press these wing head nuts into the backside of a panel in applications where you have access to both sides of the panel. A quarter-turn locks and releases access panels, doors, and covers.

Wing Head Quarter-Turn Captive
Panel Screws with Clip-On Nut

These wing-head screws have a clip-on nut that allows you to mount them near the edge of a thin panel. Use them to lock and release access panels, doors, and covers with a quarter-turn.

Rounded Head Quarter-Turn Captive
Panel Screws with Clip-On Nut

These rounded head screws have a nut that clips onto the edge of a thin panel, allowing you to mount the screw near edges. A quarter-turn locks and releases access panels, doors, and covers.

Rounded Head Quarter-Turn Captive
Panel Screws with Rivet-Mount Nut

These rounded head nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers.

Wing Head Quarter-Turn Captive
Panel Screws with Rivet-Mount Nut

Rivet these wing head nuts into thin panels for a flush fit. They can be mounted without space between panels. A quarter-turn locks and releases access panels, doors, and covers.

Unthreaded Inserts

Steel Unthreaded Inserts for Plastic

A zinc-plated finish gives these steel inserts mild corrosion resistance.

Unthreaded Inserts for Metal

Protect bolts from sideways (shear) pressure.

Bearings

High-Load Dry-Running Thrust Bearings

A metal backing adds strength.

Washers for Needle-Roller Thrust Bearings

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

Needle-Roller Thrust Bearings

Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings.

Thrust Ball Bearings

Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components.

One-Piece Thrust Ball Bearings

In addition to handling higher loads than three-piece ball bearings, one-piece bearings are easier to handle. They have an outer band that holds the bearing together and acts as a shield against dust and other contaminants.

Thrust Ball Bearings for Shaft Ends

Use these bearings as miniature high-precision turntables. They have a unique design that allows your shaft to sit on top of the bearing rather than being inserted through it.

Disc Springs

Belleville Disc Springs

Use these steel springs in noncorrosive environments.

Belleville Disc Springs for Ball Bearings

Install these springs, also known as bearing preload washers, against ball bearings to reduce noise and unwanted movement along the shaft.

Belleville Disc Springs for Flange Bolts

Keep pipe flange connections sealed during demanding applications. When installed under flange bolt heads, these springs compensate for shock loads, vibration, and thermal expansion and contraction.

Wave Disc Springs

Use these high-carbon steel springs in noncorrosive environments.

Stacked Wave Disc Springs

Multiple rows of waves allow these springs to handle higher loads than standard wave disc springs.

Split Wave Disc Springs

A gap allows these springs to compress without widening, so they won't bind or deform when used inside a housing with tight clearance.

Curved Disc Springs

Use these high-carbon steel springs in noncorrosive environments.

Finger Disc Springs

Raised tabs, known as fingers, enable these springs to compress without widening, so they won't bind or deform in housings with little clearance. Use with ball bearings in precision and high-speed drive assemblies to reduce noise, vibration, and wear.

Linear Wave Springs

Similar to disc springs, these linear springs are good for absorbing vibration and filling in gaps along the length of an object.

Janitorial and Cleaning

Water Brooms

Attach one of these brooms to a garden hose to sweep away dirt and dust—its water jets turn your hose water into pressurized water for quick, easy cleaning.

Steel Wool Soap Pads

Get heavy scrubbing action with these soap-saturated scouring pads.

Broom/Floor Squeegees

Clear away debris and water with one tool.

Chemical-Resistant Push Brooms for Smooth Surfaces

Plastic bristles resist chemicals.

Push Brooms for Smooth Surfaces

These brooms have soft, flexible bristles that sweep away fine to medium dust and dirt on nonporous surfaces such as tile, wood, and smooth concrete.

Lightweight Push Brooms for Smooth Surfaces

A durable steel strip locks in bristles without the added weight of a wood or plastic block. Bristles are chemical-resistant plastic.

Lightweight Push Brooms for Semi-Smooth Surfaces

A durable steel strip locks in bristles without the added weight of a wood or plastic block. Bristles are chemical-resistant plastic.

Heavy Duty Push Brooms for Semi-Smooth Surfaces

An all-steel handle welded to a steel brace and mounted on a wood block makes these more durable than our other brooms for semi-smooth surfaces.

Low-Clearance Push Brooms for Semi-Smooth Surfaces

An adjustable-angle handle allows you to sweep in tight spaces. Bristles are chemical-resistant plastic.

Multisurface Push Brooms

For all floor surfaces, these brooms have a mix of stiff bristles for heavy debris and softer bristles for finer debris. Bristles are chemical resistant.

Steel Bristle Push Brooms for Rough Surfaces

Choose a steel bristle broom for dislodging heavy accumulations on rough, irregular surfaces such as concrete and brick.

Low-Clearance Push Brooms for Rough Surfaces

An adjustable-angle handle allows you to sweep in tight spaces. Bristles are chemical-resistant plastic.

Lightweight Push Brooms for Rough Surfaces

A durable steel strip locks in bristles without the added weight of a wood or plastic block. Bristles are chemical-resistant plastic.

Heavy Duty Push Brooms for Rough Surfaces

An all-steel handle welded to a steel brace and mounted on a wood block makes these more durable than our other brooms for rough surfaces.

Extra-Wide Angle Brooms for Smooth Surfaces

They're 50% wider than our other angle brooms, allowing you to clean a larger area.

Brushes for Swing-Style Floor Buffer/Scrubbers

Swing-Style Floor Buffer/Scrubbers

Scrub, strip, buff, and polish floors. These buffer/scrubbers are suitable for wet and dry applications on hard floors and carpet.

High-Speed Floor Burnishers

Polish hard floors to a high-gloss finish with this burnisher that operates at 1,500 rpm.

Multi-Angle Scrub Brushes with Extended-Reach Handle

Bristles remain on the floor whether you're standing or bending, helping you clean hard-to-reach areas like corners, baseboards, up walls, or under equipment.

Cylindrical Scrub Brushes

Clean inside containers, pipes, and other places were most brushes can’t fit.

Bottle Brushes

Clean bottles, lab glassware, and other small containers.

Tube Brushes

Tube Brushes with Handle

The handle makes it easy to clean tubes, pipes, and holes by hand.

Tube Brush Sets with Changeable-Tip Handle

Change brush tips to clean different tube sizes.

Threaded-Shank Tube Brushes

Attach the shank to a handle or power tool.

Tube Brushes

Remove light-to-medium rust and stains and small burs from tubes, pipes, and holes.

Tube Brush Sets

Remove light to medium rust, stains, and small burs from tubes, pipes, and holes.

Low-Scratch Tube Brushes with Handle

The handle makes it easy to brush by hand. Clean delicate surfaces inside tubes, pipes, and holes.

Low-Scratch Tube Brush Sets with Handle

The handle makes it easy to brush by hand. Clean delicate surfaces inside tubes, pipes, and holes.

Threaded-Shank Aggressive-Cleaning Tube Brushes

Attach the shank to a handle or power tool.

Aggressive-Cleaning Tube Brushes with Handle

The handle makes it easy to brush by hand.

Aggressive-Cleaning Tube Brushes

Use for tasks such as removing weld slag, heavy surface contamination, and large burs from tubes, pipes, and holes.

Low-Scratch Tube Scrapers

Use for soft and hard deposits.

Tube Scrapers

Use for hard, heavy deposits.

Internal and External Tube Brushes

Clean the inside and outside of a tube with one brush.

Aggressive-Cleaning Tube Brushes for Internal Threads

Use for tasks such as removing weld slag, heavy surface contamination, and large burs.

Internal and External Tube Brush Sets

Sets include an assortment of brushes for cleaning the inside and outside of tubes.

External Tube Brushes

Commonly used before soldering, these brushes clean the outside of tubes.

Flexible Tube Brushes for Closed-End Holes

Bend these brushes through curved holes and reach into corners.

Tube Brushes for Closed-End Holes

Bristles at the top of these brushes clean the bottom of closed-end holes.

Abrasive Hand Brushes

Abrasive Brushes

Remove light-to-medium rust and stains and small burs.

Refillable Miniature Abrasive Brushes

Turn the handle to expose more bristles as they wear.

Aggressive-Cleaning Abrasive Brushes

Extended-Reach Aggressive-Cleaning
Abrasive Brushes

These brushes have a 20 1/2" long handle.

Aggressive-Cleaning Abrasive Brushes with Scraper

Abrasive Brushes for Slots and Corners

The bristles angle inward in a V shape to get into narrow spaces.

Abrasive Brushes for Contours

Remove heavy rust, weld slag, and scale with these brushes—the curved handle conforms to round and uneven surfaces.

Brushes with Shank

Brushes with Shank for Tight Spaces

The small brush face can access hard-to-reach spots to remove light-to-medium rust and stains and small burs.

Long-Lasting Brushes with Shank for Tight Spaces

Removable bands around the bristles keep them from flaring and breaking. Adjust the bands to change bristle length.

Aggressive-Cleaning Brushes
with Shank for Tight Spaces

Use for tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. The small brush face can access hard-to-reach spots.

Long-Lasting Aggressive-Cleaning
Brushes with Shank for Tight Spaces

The bristles are coated with a synthetic compound that keeps them stiff and straight so they last longer than standard brushes.

Brushes with Shank for Flat Surfaces

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Brushes with Shank for Angles and Corners

These brushes conform to corners, curves, and irregular surfaces to remove light-to-medium rust and stains and small burs.

Long-Lasting Brushes with
Shank for Angles and Corners

The bristles are coated with a synthetic compound that keeps them stiff and straight so they’re more aggressive and last longer than standard brushes.

Aggressive-Cleaning Brushes
with Shank for Closed-End Holes

Use for tasks such as removing weld slag, heavy surface contamination, and large burs.

Brushes with Shank for Closed-End Holes

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Brushes with Shank for Open-End Holes

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Arbor-Mount Brushes

Aggressive-Cleaning Brushes for Flat Surfaces

The rigid, front-facing bristles are partially twisted for added cleaning power when removing debris from flat surfaces.

Long-Lasting Aggressive-Cleaning
Brushes for Flat Surfaces

The bristles are partially twisted in alternating directions, which prevents them from separating.

Fast- and Aggressive-Cleaning
Brushes for Flat Surfaces

The bristles are twisted all the way to the end so they’re more rigid and clean quickly.

Aggressive-Cleaning Brushes
with Guard for Flat Surfaces

The guard deflects dust and sheared-off bristle tips.

High-Coverage Aggressive-Cleaning
Brushes for Flat Surfaces

Two rows of bristles cover more surface area.

Long-Lasting Brushes with Guard for Flat Surfaces

Multiple wires are twisted into each bristle for a long life.

Brushes for Flat Surfaces

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Brushes with Guard for Flat Surfaces

The guard deflects dust and sheared-off bristle tips. Use these flexible-bristle brushes to remove light-to-medium rust and stains and small burs.

Brushes for Angles and Corners

Clean around edges, corners, and contours with these dish-shaped brushes.

Wheel Brushes

Wheel Brushes with Shank

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Aggressive-Cleaning Wheel Brushes with Shank

Rigid, partially twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. Also known as knot-wire brushes.

Wheel Brushes

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Aggressive-Cleaning Wheel Brushes

Rigid, twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs.

Long-Lasting Aggressive-Cleaning Wheel Brushes

Bristles are partially twisted in alternating directions, which prevents them from separating.

Fast- and Aggressive-Cleaning Wheel Brushes

The bristles are twisted all the way to the end so they’re more rigid and clean fastest.

Long-Lasting Fast- and
Aggressive-Cleaning Wheel Brushes

A mounting nut on each side of the arbor lets you use both sides of the brush.

Blowguns, Air Nozzles, and Air Knives

Extended-Reach Air Nozzles

The extra length allows access into hard-to-reach areas.

Wide-Airflow Air Nozzles

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Bend-and-Stay Air Nozzles

Nozzles are attached to a flexible tube or hose that bends and holds its shape until you reposition it.

Blow-and-Spray Air Nozzles

Convert your blowgun to a spray gun. These nozzles spray air and liquids at the same time.

90° Airflow Blowguns

Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.

Static-Eliminating Blowguns

Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).

Hands-Free Static-Eliminating Blowguns

Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.

High-Airflow Static-Eliminating Blowguns

These guns provide more than three times the airflow of standard static-eliminating blowguns.

Parts Washing

Parts Washers for Solvent-Based Solutions

Low-Fume Parts Washers for Solvent-Based Solutions

The cleaning solution is stored inside a drum to reduce fumes and solvent evaporation.

Bench-Top Parts Washers for Solvent-Based Solutions

Sized for a benchtop, these washers are good for cleaning small parts.

Parts Washing Tubs

Baskets for Parts Washing Tubs

Aggressive-Cleaning Parts Washing Brushes

Steel bristles remove weld slag and heavy surface contamination.

Easy-Drain Parts Washing Cans

Push down on the spring-loaded drain plate to submerge and agitate to clean parts.

Parts Washing Cans with Removable Basket

Easily insert and remove parts from these cans.

Parts Washing Cans

Baskets and Dipping Racks

Steel Round Parts Baskets

Steel Rectangular Parts Baskets

More economical than stainless steel, choose these baskets when corrosion is not a concern.

Round Enclosed Parts Baskets

Steel Rectangular Enclosed Parts Baskets

More economical than stainless steel, choose these baskets when corrosion is not a concern.

Dipping Racks

Create your own dipping rack for painting, cleaning, and drying.

Strut Channel Fasteners

Strut Channel Washers

Use with hex nuts to connect threaded rod.

Sit-on-Top Strut Channel Washers

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

Centering Strut Channel Washers

Keep hardware centered in the strut channel slot.

No-Spin Strut Channel Washers

Notches on these washers grip the channel to keep them in place.

Hinged Strut Channel Nuts

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Fittings for Medium-Wall (IMC) and Thick-Wall (Rigid) Steel Conduit

Reducing Washers for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Reduce the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.

Raintight Reducing Washers for Medium-Wall
(IMC) and Thick-Wall (Rigid) Steel Conduit

Seal out moisture while reducing the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.

Tag Holders

Washer-Style Tag Holders

Bolt these holders to a surface and then attach a tag to the small hole.

Tag Rings

Loop these rings onto tags.

Locking Tag Rings

Choose from twisting, threading, cinching, and other locking mechanisms.

Colored Tag Ring Assortments

Includes a black, blue, green, purple, and red tag ring.

Spring-Loaded Rotary Shaft Seals

Spring-Loaded Rotary Shaft Seals with Wiper Lip

These seals have a metal case that creates a tight seal when mating with smooth surfaces.

Bore-Sealing Spring-Loaded
Rotary Shaft Seals with Wiper Lip

Ribbed Buna-N over steel creates a tight seal with the bore, even when mating with a rough surface or in a split housing.

Spring-Loaded Rotary Shaft Seals

Also known as oil seals, use these to retain oil on rotating shafts in motors, pumps, bearings, and gearboxes. A spring secures the lip against the shaft, preventing messy leaks. Press-fit seals into the bore around the shaft.

Strainers

Large-Particle Suction Strainers

Strainers have a heavy duty construction to withstand a high suction force and wide openings to trap large debris.

Medium-Pressure Iron and Steel Y-Strainers

High-Pressure Steel Y-Strainers

Withstands temperatures up to 450° F.

High-Temperature High-Pressure Steel Y-Strainers

Webbing Anchor Plates

Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.

File Cleaners

The sharp bristles clear metal shavings from file teeth. Also known as file cards.

File Cleaners with Brush

A hard-bristle brush cleans fine-finish files.

Washers

General Purpose Washers

Metric General Purpose Washers

Oversized Washers

Metric Oversized Washers

Mil. Spec. Washers

SAE Washers

USS Washers

ASME Washers for Soft Material

Washers with Material Certification

Washers for Structural Applications

Tension-Indicating Washers for Structural Applications

Metric Washers for Structural Applications

Washers for Blind Rivets

Countersunk Washers

Metric Countersunk Washers

Finishing Countersunk Washers

Metric Finishing Countersunk Washers

Clipped Washers

Oversized Clipped Washers

Double-Clipped Washers

Square Washers

Square Washers for Blind Rivets

Sleeve Washers for Soft Material

Easy-Install Slotted Washers

Angled-Edge Washers forToggle Clamp Holding Screws

Angled-Edge Washers for Tie-Down Straps

Steel Washers for Rigid Insulation

Cup Washers for Oversized Holes

Washers for Plaster

Curved Washers

Washers for Foam Insulation

Split Lock Washers

Split Lock Washers

Metric Split Lock Washers

Mil. Spec. Split Lock Washers

Metric Split Lock Washers for Socket Head Screws

Split Lock Washers for Socket Head Screws

Oversized Split Lock Washers

Spring Lock Washers

Belleville Spring Lock Washers

Belleville Spring Lock Washers for Socket Head Screws

Spring Lock Washers for Slotted Bearing Nuts

Metric Spring Lock Washers

Tooth Lock Washers

External-Tooth Lock Washers

Metric External-Tooth Lock Washers

Mil. Spec. External-Tooth Lock Washers

Tight-Grip External-Tooth Lock Washers

Countersunk Tight-Grip External-Tooth Lock Washers

Countersunk External-Tooth Lock Washers

Internal-Tooth Lock Washers

Metric Internal-Tooth Lock Washers

Mil. Spec. Internal-Tooth Lock Washers

Internal-Tooth Lock Washers for Soft Material

Internal-/External-Tooth Lock Washers

Wedge Lock Washers

Wedge Lock Washers

Tab Lock Washers

Metric Tab Lock Washers

Tab Lock Washers

Square-Neck Bolt Lock Washers

Square-Neck Bolt Lock Washers

Metal-Bonded Sealing Washers

High-Pressure-Rated Metal-Bonded Sealing Washers

Metric High-Pressure-RatedMetal-Bonded Sealing Washers

Pressure-Rated Metal-Bonded SealingWashers for Nuts and Washers

Metal-Bonded Sealing Washers

Leveling and Wave Washers

Triple-Wave Washers

Metric Single-Wave Washers

Single-Wave Washers

Leveling Washers

Metric Leveling Washers

Leveling Washers for I-Beams

Metric Leveling Washers for I-Beams

Shims

Ring Shims

Ring Shim Sets

Wide-Rim Ring Shims

Angled-Edge Washers for
Toggle Clamp Holding Screws

Metric High-Pressure-Rated
Metal-Bonded Sealing Washers

Pressure-Rated Metal-Bonded Sealing
Washers for Nuts and Washers

External, Internal, and Side-Mount
Retaining Ring Assortments