Depth Measurement Calipers

Filter by

System of Measurement

Distance Measured

Display Type

Manufacturer

Jaw Material

SPC Data Output

Measuring Increments

Overall Length

Body Material

Caliper Adjustment

Fine-Adjustment Wheel

Jaw Depth

Measures

Certificate Type

Calibration Certificate Traceable to NIST

Battery Size

Digital Display Type

Container Type

Manufacturer Model Number

Caliper Type

Material

Power Source

Batteries Included

Environment

REACH

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

153 Products

Caliper Type

Digital

The most precise and versatile calipers

103 products

Dial

Watch the needle move as the jaws do for trustworthy measurements

49 products

Caliper Type

Vernier

Traditional calipers, combining precision and durability

11 products

Performance

Coolant Resistant

Tightly sealed so spraying and dripping fluids won't seep in

48 products

Digital Calipers

The most precise and versatile calipers. Their LCD display gives instant measurements down to 0.0005”—no need to count graduations. Swap between inch and metric or set the position to zero, all with the press of a button. You don’t need to reset the zero point since they retain their position when turned off, also known as absolute (ABS) positioning.

Our calipers come with a signed certificate of inspection, so you can trust your measurements are accurate every time. Their precision-ground jaws glide up and down the body for a silky-smooth feel.

Mitutoyo—The go-to for machinists and engineers. Every part of these calipers is made within Mitutoyo's automated system and tested in-house in Japan. Their jaws are laser cut to exact dimensions for the most reliable measurements.

Starrett—Starrett calipers come packaged in their iconic wood or red plastic case, so you'll be able to spot them on the busiest of bench tops.

McMaster-Carr Approved—The performance of brand-name calipers without the cost.

With SPC Data Output—Send measurements to a computer or data processor to store, analyze, and manage data. You'll need a data cable or SPC wireless transmitter and receiver.

With SPC Data Output and Bluetooth Connection—Wirelessly send measurements to your smartphone and other Bluetooth devices to store, analyze, and manage data.

Calibration Certificate—Choose these calipers when precision measurements are required for quality control or by regulation. The certificate is traceable to NIST, so you can be confident your measurements are correct and consistent.

Carbide Jaw—Our longest-lasting jaws won't dull when pressed against extra-hard or abrasive surfaces, such as grinding wheels.

	Measuring Range		Accuracy		Measuring Increments						Calipers		Calipers with Calibration Certificate
	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Overall Lg.	Body Material	Jaw Material	Mfr. Model No.		Each		Each
Mitutoyo







				Without SPC Data Output

				0" to 4"	0 to 100	±0.001"	±0.025 mm	0.0005"	0.01	7 1/4"	Stainless Steel	Stainless Steel	500-195-30	0000000	0000000	0000000	0000000


				0" to 6"	0 to 150	±0.001"	±0.025 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Stainless Steel	500-196-30	0000000	000000	0000000	000000
				0" to 6"	0 to 150	±0.001"	±0.025 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Carbide	500-733-20	0000000	000000	0000000	000000
				0" to 8"	0 to 200	±0.001"	±0.025 mm	0.0005"	0.01	11 1/2"	Stainless Steel	Stainless Steel	500-197-32	0000000	000000	0000000	000000
				0" to 8"	0 to 200	±0.001"	±0.025 mm	0.0005"	0.01	11 1/2"	Stainless Steel	Carbide	500-734-20	0000000	000000	0000000	000000
				0" to 12"	0 to 300	±0.0015"	±0.04 mm	0.0005"	0.01	16"	Stainless Steel	Stainless Steel	500-193-30	0000000	000000	0000000	000000




						With SPC Data Output

						0" to 4"	0 to 100	±0.001"	±0.025 mm	0.0005"	0.01	7 1/4"	Stainless Steel	Stainless Steel	500-170-30	00000000	000000	00000000	000000


						0" to 6"	0 to 150	±0.001"	±0.025 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Stainless Steel	500-171-30	00000000	000000	00000000	000000
						0" to 8"	0 to 200	±0.001"	±0.025 mm	0.0005"	0.01	11 1/2"	Stainless Steel	Stainless Steel	500-172-30	00000000	000000	00000000	000000
						0" to 12"	0 to 300	±0.0015"	±0.04 mm	0.0005"	0.01	16"	Stainless Steel	Stainless Steel	500-173-30	00000000	000000	00000000	000000


						Starrett







										Without SPC Data Output

										0" to 6"	0 to 150	±0.001"	±0.025 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Stainless Steel	EC799A-6/150	00000000	000000	00000000	000000


										0" to 8"	0 to 200	±0.0015"	±0.04 mm	0.0005"	0.01	11 1/2"	Stainless Steel	Stainless Steel	EC799A-8/200	00000000	000000	00000000	000000
										0" to 12"	0 to 300	±0.0015"	±0.04 mm	0.0005"	0.01	15 1/4"	Stainless Steel	Stainless Steel	EC799A-12/300	00000000	000000	00000000	000000




												With SPC Data Output

												0" to 6"	0 to 150	±0.001"	±0.02 mm	0.0005"	0.01	10"	Stainless Steel	Carbide	798BX-6/150	0000000	000000	0000000	000000


												McMaster-Carr Approved







																Without SPC Data Output

0" to 4"	0 to 100															±0.001"	±0.02 mm	0.0005"	0.01	7 1/4"	Stainless Steel	Steel	—	0000000	00000	———	0


0" to 6"	0 to 150															±0.001"	±0.02 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Steel	—	0000000	00000	———	0
0" to 8"	0 to 200	±0.001"														±0.02 mm	0.0005"	0.01	11 1/4"	Stainless Steel	Steel	—	0000000	00000	———	0
0" to 12"	0 to 300	±0.001"	±0.02 mm													0.0005"	0.01	15 1/4"	Stainless Steel	Steel	—	0000000	000000	———	0




		With SPC Data Output and Bluetooth Connection

		0" to 4"	0 to 100													±0.001"	±0.02 mm	0.0005"	0.01	7 1/4"	Stainless Steel	Stainless Steel	—	0000000	00000	———	0


		0" to 6"	0 to 150													±0.001"	±0.02 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Stainless Steel	—	0000000	00000	———	0
		0" to 8"	0 to 200													±0.0015"	±0.03 mm	0.0005"	0.01	11 1/4"	Stainless Steel	Stainless Steel	—	0000000	00000	———	0
		0" to 12"	0 to 300													±0.0015"	±0.03 mm	0.0005"	0.01	15 1/4"	Stainless Steel	Stainless Steel	—	0000000	000000	———	0

Accessories and Replacements for Calipers

SPC Data Cables


Mitutoyo Data Out Switch C × 10-Pin Mitutoyo Connector	Mitutoyo Data Out Switch C × USB-A

Straight Starrett Connector × USB-A

USB-A Connection—Plug calipers with SPC data output directly into your computer.

10-Pin Mitutoyo Connector—Connect calipers with SPC data output to a Mitutoyo miniprocessor or multiplexer.

	Lg.		Each
Mitutoyo



	Mitutoyo Data Out Switch C × 10-Pin Mitutoyo Connector	40"	0000000	000000


	Mitutoyo Data Out Switch C × 10-Pin Mitutoyo Connector	80"	00000000	00000
	Mitutoyo Data Out Switch C × USB-A	80"	000000	000000


	Starrett



			Straight Starrett Connector × USB-A	6 ft.	0000000	000000

SPC Wireless Transmitters

Mitutoyo Data Out Switch C Connection

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a receiver.

Electrical Connection	Mfr. Series		Each
Mitutoyo Data Out Switch C	U-WAVE-T	000000	0000000

SPC Wireless Receivers

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a transmitter.

	For Mfr. Series		Each
Mitutoyo



	USB-A	U-WAVE-T	000000	0000000

Depth Base Attachments


Mitutoyo	Starrett

Clamp onto the end of your caliper to steady it while measuring depth.

		Each
Mitutoyo



	0" to 4", 0" to 6", 0" to 8", 0 mm to 100 mm, 0 mm to 150 mm, 0 mm to 200 mm	0000000	000000


	0" to 12", 0 mm to 300 mm	0000000	00000


	Starrett



			0" to 6", 0" to 8", 0" to 9", 0 mm to 150 mm, 0 mm to 200 mm, 0 mm to 225 mm	00000000	000000

Display Freeze Adapters

Save your measurement on the display even after repositioning the caliper.

		Each
Mitutoyo



	500-170-30, 500-171-30, 500-172-30, 500-173, 500-505-10, 500-506-10, 500-507-10, 572-210-30, 572-211-20, 572-213-10	00000000	000000

Replacement Battery Covers


Mitutoyo	Starrett

		Each
Mitutoyo



	500-170-30, 500-171-30, 500-172-30, 500-173-30, 500-193-30, 500-195-30, 500-196-30, 500-197-32, 573-291-30	0000000	00000


	500-733-20, 500-734-20	00000000	0000


	Starrett



			EC799A-6/150, EC799A-8/200	0000000	00000

Replacement Cases


Mitutoyo	Starrett

	Material		Each
Mitutoyo



	500-170-30, 500-171-30, 500-195-30, 500-196-30, 500-474, 500-733-20, 500-752-20, 500-762-20, 500-784, 505-730, 505-738, 505-740, 505-741, 505-742, 573-721-20	Plastic	0000000	000000


	500-172-30, 500-197-32, 500-475, 500-734-20, 500-753-20, 500-763-20, 500-785, 505-731, 505-737, 505-741, 505-743, 573-701-20, 573-705-20, 573-761-20	Plastic	0000000	00000
	500-173, 500-193, 500-754-10, 500-764-10, 505-746, 505-749	Plastic	0000000	00000


	Starrett



			120-12, 120Z-12, 798A-12/300, 798B-12/300, EC799A-12/300	Wood	0000000	00000


			120A-6, 120AM-150, 120X-6, 798A-6/150, 798B-6/150, B120A-6, EC799A-6/150, R120A-6	Plastic	0000000	00000
			798A-8/200, 798B-8/200, EC799A-8/200	Wood	0000000	00000

			1-9	10-49	50-Up
Replacement SR44 Silver Oxide Battery	00000000	Each	00000	00000	00000
Replacement CR2032 Lithium Battery	0000000	Pkg. of 1	0000	0000	0000

Dial Calipers

Watch the needle move as the jaws do for trustworthy measurements. To calculate your final measurement, simply add the decimal value on the dial to the number on the main scale. These calipers are battery-free, so they're always ready to use. However, the glass dial and internal components can break if accidentally dropped.

Starrett—Precision made and tested in the U.S. These Starrett calipers come packaged in their iconic wood or red plastic case, so you'll be able to spot them on the busiest of bench tops.

McMaster-Carr Approved—The performance of brand-name calipers without the cost.

Carbide Jaw—Our longest-lasting jaws won't dull when pressed against extra-hard or abrasive surfaces, such as grinding wheels.

Plastic Jaw—Best for measuring delicate surfaces, these jaws won't scratch. They also won't conduct electricity when working with wires and electrical parts. However, they'll wear down faster than metal jaws.

Built-In Backlash Control—The needle stays steady even if the dial is bumped or vibrated for reliably accurate measurements.

											Calipers		Calipers with Calibration Certificate
	Measuring Range	Accuracy	Measuring Increments	Measurement per Dial Rev.	Overall Lg.	Body Material	Jaw Material	Mfr. Series	Features	Choose a Dial Face Color		Each		Each
Mitutoyo



		0" to 6"	±0.001"	0.001"	0.1"	9"	Stainless Steel	Stainless Steel	505-742	Built-In Backlash Control	Black, Green, Orange, Purple, Red, White	0000000	0000000	———	0


		0" to 6"	±0.001"	0.001"	0.1"	9"	Stainless Steel	Stainless Steel	505-742	Built-In Backlash Control	Black, Blue, Green, Orange, Purple, Red, White	———	0	00000000	0000000
		0" to 6"	±0.001"	0.001"	0.1"	9"	Stainless Steel	Carbide	505-738	Built-In Backlash Control	White	0000000	000000	0000000	000000
		0" to 6"	±0.001"	0.001"	0.2"	9"	Stainless Steel	Stainless Steel	505-740	Built-In Backlash Control	White	0000000	000000	0000000	000000
		0" to 8"	±0.002"	0.001"	0.1"	11 1/4"	Stainless Steel	Stainless Steel	505-743	Built-In Backlash Control	White	0000000	000000	0000000	000000
		0" to 8"	±0.002"	0.001"	0.1"	11 1/4"	Stainless Steel	Carbide	505-737	Built-In Backlash Control	White	0000000	000000	0000000	000000
		0" to 8"	±0.002"	0.001"	0.2"	11 1/4"	Stainless Steel	Stainless Steel	505-741	Built-In Backlash Control	White	0000000	000000	0000000	000000
		0" to 12"	±0.002"	0.001"	0.1"	16"	Stainless Steel	Stainless Steel	505-746	Built-In Backlash Control	White	0000000	000000	0000000	000000
		0" to 12"	±0.002"	0.001"	0.2"	16"	Stainless Steel	Stainless Steel	505-749	Built-In Backlash Control	White	0000000	000000	00000000	000000
		0 mm to 150 mm	±0.03 mm	0.01 mm	1 mm	9"	Stainless Steel	Stainless Steel	505-732	Built-In Backlash Control	Yellow	00000000	000000	———	0
		0 mm to 150 mm	±0.03 mm	0.025 mm	2 mm	9"	Stainless Steel	Stainless Steel	505-730	Built-In Backlash Control	Yellow	0000000	000000	0000000	000000


		0 mm to 200 mm	±0.03 mm	0.01 mm	1 mm	11 1/4"	Stainless Steel	Stainless Steel	505-733	Built-In Backlash Control	Yellow	00000000	000000	———	0
		0 mm to 200 mm	±0.03 mm	0.025 mm	2 mm	11 1/4"	Stainless Steel	Stainless Steel	505-731	Built-In Backlash Control	Yellow	0000000	000000	0000000	000000
		0 mm to 300 mm	±0.04 mm	0.02 mm	2 mm	15 3/4"	Stainless Steel	Stainless Steel	505-745	Built-In Backlash Control	Yellow	00000000	000000	———	0


		Starrett



				0" to 6"	±0.001"	0.001"	0.1"	9"	Stainless Steel	Stainless Steel	120	Built-In Backlash Control	Black, Red, White	0000000	000000	00000000	000000


				0" to 12"	±0.0015"	0.001"	0.1"	15 3/4"	Stainless Steel	Stainless Steel	120	Built-In Backlash Control	White	0000000	000000	———	0
				0 mm to 150 mm	±0.03 mm	0.025 mm	2 mm	9"	Stainless Steel	Stainless Steel	120	Built-In Backlash Control	Yellow	0000000	000000	0000000	000000


				McMaster-Carr Approved



						0" to 6"	±0.001"	0.001"	0.1"	9 1/2"	Stainless Steel	Steel	—	Built-In Backlash Control	Black	0000000	00000	———	0


						0" to 6"	±0.001"	0.001"	0.1"	9 1/2"	Stainless Steel	Steel	—	Built-In Backlash Control	White	0000000	00000	———	0
						0" to 6"	±0.001"	0.001"	0.1"	9 1/2"	Stainless Steel	Carbide	—	Built-In Backlash Control	White	0000000	00000	———	0
						0" to 8"	±0.001"	0.001"	0.1"	11 1/2"	Stainless Steel	Steel	—	Built-In Backlash Control	White	0000000	00000	———	0
						0" to 12"	±0.002"	0.001"	0.1"	16 1/2"	Stainless Steel	Steel	—	Built-In Backlash Control	White	0000000	00000	———	0
						0" to 6" 0 mm to 150 mm	±0.001" ±0.03 mm	0.001" 0.02 mm	0.1"	9 1/2"	Stainless Steel	Steel	—	Built-In Backlash Control	White	0000000	00000	———	0
						0" to 12" 0 mm to 300 mm	±0.002" ±0.05 mm	0.001" 0.02 mm	0.1"	16"	Stainless Steel	Steel	—	Built-In Backlash Control	White	0000000	00000	———	0
						0 mm to 150 mm	±0.025 mm	0.1 mm	10 mm	8 3/4"	Plastic	Plastic	—	—	White	0000000	00000	———	0

Accessories and Replacements for Calipers

Depth Base Attachments


Mitutoyo	Starrett

Clamp onto the end of your caliper to steady it while measuring depth.

		Each
Mitutoyo



	0" to 4", 0" to 6", 0" to 8", 0 mm to 100 mm, 0 mm to 150 mm, 0 mm to 200 mm	0000000	000000


	0" to 12", 0 mm to 300 mm	0000000	00000


	Starrett



			0" to 6", 0" to 8", 0" to 9", 0 mm to 150 mm, 0 mm to 200 mm, 0 mm to 225 mm	00000000	000000

	For Caliper Measurement Range
Starrett


0" to 12"	0000000	0000000

Replacement Cases


Mitutoyo	Starrett

	Material		Each
Mitutoyo



	500-170-30, 500-171-30, 500-195-30, 500-196-30, 500-474, 500-733-20, 500-752-20, 500-762-20, 500-784, 505-730, 505-738, 505-740, 505-741, 505-742, 573-721-20	Plastic	0000000	000000


	500-172-30, 500-197-32, 500-475, 500-734-20, 500-753-20, 500-763-20, 500-785, 505-731, 505-737, 505-741, 505-743, 573-701-20, 573-705-20, 573-761-20	Plastic	0000000	00000
	500-173, 500-193, 500-754-10, 500-764-10, 505-746, 505-749	Plastic	0000000	00000


	Starrett



			120-12, 120Z-12, 798A-12/300, 798B-12/300, EC799A-12/300	Wood	0000000	00000


			120A-6, 120AM-150, 120X-6, 798A-6/150, 798B-6/150, B120A-6, EC799A-6/150, R120A-6	Plastic	0000000	00000

Digital Calipers with Fractional Display

Convert measurements to fractions with the push of a button. These calipers measure in both decimals and fractions of an inch, so you don't need to memorize conversions. They're especially handy for carpentry and similar jobs that involve measurements down to _1/64".

With an LCD display, these calipers give instant measurements—no need to count graduations. Swap between inch and metric or set the position to zero, all with the press of a button.

Zero-Position Memory (ABS)—Retain the caliper's position when turned off, so you don't need to reset the zero point each time. Also called absolute (ABS) positioning.

	Measuring Range		Accuracy		Measuring Increments
	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Fractional Increments	Overall Lg.	Body Material	Jaw Material	Measuring Functions		Each
Without SPC Data Output



		0" to 4"	0 to 100	±0.001"	±0.025 mm	0.0005"	0.01	1/128"	7 1/4"	Stainless Steel	Stainless Steel	—	0000000	000000


		0" to 6"	0 to 150	±0.001"	±0.025 mm	0.0005"	0.01	1/64"	9 1/2"	Stainless Steel	Stainless Steel	—	0000000	00000
		0" to 6"	0 to 150	±0.008"	±0.20 mm	0.0005"	0.01	1/64"	9 1/4"	Plastic	Plastic	Zero-Position Memory (ABS)	0000000	00000
		0" to 8"	0 to 200	±0.0015"	±0.04 mm	0.0005"	0.01	1/128"	11 1/4"	Stainless Steel	Stainless Steel	—	0000000	00000
		0" to 12"	0 to 300	±0.0015"	±0.04 mm	0.0005"	0.01	1/64"	15 3/4"	Stainless Steel	Stainless Steel	—	0000000	000000

Replacement Batteries

			1-9	10-49	50-Up
Replacement SR44 Silver Oxide Battery	00000000	Each	00000	00000	00000
Replacement CR2032 Lithium Battery	0000000	Pkg. of 1	0000	0000	0000

Coolant-Resistant Digital Calipers

Measure parts inside CNC machines and other places coated with coolant and cutting oil. The display and battery cover are tightly sealed, so spraying and dripping fluids won't seep in.

With an LCD display, these calipers give instant measurements—no need to count graduations. Swap between inch and metric or set the position to zero, all with the press of a button. You don't need to reset the zero point since they retain their position when turned off, also known as absolute (ABS) positioning.

Starrett—Starrett calipers come packaged in their iconic wood or red plastic case, so you'll be able to spot them on the busiest of bench tops.

McMaster-Carr Approved—The performance of brand-name calipers without the cost.

With SPC Data Output—Send measurements to a computer or data processor to store, analyze, and manage data. You'll need a data cable or SPC wireless transmitter and receiver.

With SPC Data Output and Bluetooth Connection—Wirelessly send measurements to your smartphone and other Bluetooth devices to store, analyze, and manage data.

	Measuring Range		Accuracy		Measuring Increments							Calipers		Calipers with Calibration Certificate
	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Overall Lg.	Body Material	Jaw Material	Enclosure Rating	Mfr. Model No.		Each		Each
Mitutoyo







				Without SPC Data Output

				0" to 6"	0 to 150	±0.001"	±0.025 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Stainless Steel	IP67	500-752-20	0000000	0000000	0000000	0000000


				0" to 8"	0 to 200	±0.001"	±0.025 mm	0.0005"	0.01	11 1/2"	Stainless Steel	Stainless Steel	IP67	500-753-20	0000000	000000	0000000	000000
				0" to 12"	0 to 300	±0.0015"	±0.04 mm	0.0005"	0.01	16"	Stainless Steel	Stainless Steel	IP67	500-754-20	0000000	000000	0000000	000000




						With SPC Data Output

						0" to 6"	0 to 150	±0.001"	±0.025 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Stainless Steel	IP67	500-762-20	0000000	000000	0000000	000000


						0" to 8"	0 to 200	±0.001"	±0.025 mm	0.0005"	0.01	11 1/2"	Stainless Steel	Stainless Steel	IP67	500-763-20	0000000	000000	0000000	000000
						0" to 12"	0 to 300	±0.0015"	±0.04 mm	0.0005"	0.01	16"	Stainless Steel	Stainless Steel	IP67	500-764-20	0000000	000000	0000000	000000


						Starrett







										Without SPC Data Output

										0" to 6"	0 to 150	±0.001"	±0.025 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Stainless Steel	IP67	798A-6/150	0000000	000000	0000000	000000


										0" to 8"	0 to 200	±0.0015"	±0.04 mm	0.0005"	0.01	11 1/2"	Stainless Steel	Stainless Steel	IP67	798A-8/200	0000000	000000	0000000	000000
										0" to 12"	0 to 300	±0.0015"	±0.04 mm	0.0005"	0.01	15 1/4"	Stainless Steel	Stainless Steel	IP67	798A-12/300	0000000	000000	0000000	000000




												With SPC Data Output

												0" to 6"	0 to 150	±0.001"	±0.025 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Stainless Steel	IP67	798B-6/150	0000000	000000	0000000	000000


												0" to 8"	0 to 200	±0.0015"	±0.04 mm	0.0005"	0.01	11 1/2"	Stainless Steel	Stainless Steel	IP67	798B-8/200	0000000	000000	0000000	000000
												0" to 12"	0 to 300	±0.0015"	±0.04 mm	0.0005"	0.01	15 1/4"	Stainless Steel	Stainless Steel	IP67	798B-12/300	0000000	000000	0000000	000000


												McMaster-Carr Approved







																With SPC Data Output and Bluetooth Connection

0" to 6"	0 to 150															±0.001"	±0.02 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Stainless Steel	IP67	—	———	0	0000000	000000


0" to 12"	0 to 300															±0.0015"	±0.04 mm	0.0005"	0.01	15 1/4"	Stainless Steel	Stainless Steel	IP67	—	———	0	0000000	000000

Accessories and Replacements for Calipers

SPC Data Cables


Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	Mitutoyo Data Out Switch A × USB-A

Straight Starrett Connector × USB-A

USB-A Connection—Plug calipers with SPC data output directly into your computer.

10-Pin Mitutoyo Connector—Connect calipers with SPC data output to a Mitutoyo miniprocessor or multiplexer.

	Lg.		Each
Mitutoyo



	Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	40"	00000000	0000000


	Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	80"	00000000	000000
	Mitutoyo Data Out Switch A × USB-A	80"	000000	000000


	Starrett



			Straight Starrett Connector × USB-A	6 ft.	0000000	000000

SPC Wireless Transmitters

Mitutoyo Data Out Switch A Connection

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a receiver.

Electrical Connection	Mfr. Series		Each
Mitutoyo Data Out Switch A	U-WAVE-T	000000	0000000

SPC Wireless Receivers

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a transmitter.

	For Mfr. Series		Each
Mitutoyo



	USB-A	U-WAVE-T	000000	0000000

Depth Base Attachments


Mitutoyo	Starrett

Clamp onto the end of your caliper to steady it while measuring depth.

		Each
Mitutoyo



	0" to 4", 0" to 6", 0" to 8", 0 mm to 100 mm, 0 mm to 150 mm, 0 mm to 200 mm	0000000	000000


	0" to 12", 0 mm to 300 mm	0000000	00000


	Starrett



			0" to 6", 0" to 8", 0" to 9", 0 mm to 150 mm, 0 mm to 200 mm, 0 mm to 225 mm	00000000	000000

	For Mfr. Model No.
Mitutoyo


500-752-20, 500-753-20, 500-754-20, 500-762-20, 500-763-20, 500-764-20, 573-701-20, 573-705-20, 573-721-20, 573-761-20	0000000	00000

Replacement Cases


Mitutoyo	Starrett

	Material		Each
Mitutoyo



	500-170-30, 500-171-30, 500-195-30, 500-196-30, 500-474, 500-733-20, 500-752-20, 500-762-20, 500-784, 505-730, 505-738, 505-740, 505-741, 505-742, 573-721-20	Plastic	0000000	000000


	500-172-30, 500-197-32, 500-475, 500-734-20, 500-753-20, 500-763-20, 500-785, 505-731, 505-737, 505-741, 505-743, 573-701-20, 573-705-20, 573-761-20	Plastic	0000000	00000
	500-173, 500-193, 500-754-10, 500-764-10, 505-746, 505-749	Plastic	0000000	00000


	Starrett



			120-12, 120Z-12, 798A-12/300, 798B-12/300, EC799A-12/300	Wood	0000000	00000


			120A-6, 120AM-150, 120X-6, 798A-6/150, 798B-6/150, B120A-6, EC799A-6/150, R120A-6	Plastic	0000000	00000
			798A-8/200, 798B-8/200, EC799A-8/200	Wood	0000000	00000

			1-9	10-49	50-Up
Replacement SR44 Silver Oxide Battery	00000000	Each	00000	00000	00000
Replacement CR2032 Lithium Battery	0000000	Pkg. of 1	0000	0000	0000

Vernier Calipers

Your traditional calipers, combining precision and durability. This classic design uses a sliding vernier scale. Just add the measurement from the main scale to the measurement on the vernier scale to get accurate readings as small as 0.001". Made completely out of metal, these calipers won't break when dropped or short-circuit when wet. They're battery-free, so they're always ready to use.

McMaster-Carr Approved—The performance of brand-name calipers without the cost.

	Measuring Range		Accuracy		Measuring Increments						Calipers
	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Overall Lg.	Body Material	Jaw Material	Mfr. Model No.		Each
Mitutoyo



		0" to 6"	—	±0.0015"	—	0.001"	—	9"	Stainless Steel	Stainless Steel	530-105	0000000	0000000


		0" to 6"	0 to 150	±0.0012"	±0.03 mm	0.001"	0.02	9"	Stainless Steel	Stainless Steel	530-312	0000000	000000
		0" to 12"	0 to 300	±0.0015"	±0.04 mm	0.001"	0.02	16"	Stainless Steel	Stainless Steel	530-119	0000000	000000


		McMaster-Carr Approved



				0" to 4"	—	±0.001"	—	0.001"	—	6 3/16"	Stainless Steel	Stainless Steel	—	0000000	00000

Depth Base Attachments

Mitutoyo

Clamp onto the end of your caliper to steady it while measuring depth.

		Each
Mitutoyo



	0" to 4", 0" to 6", 0" to 8", 0 mm to 100 mm, 0 mm to 150 mm, 0 mm to 200 mm	0000000	000000


	0" to 12", 0 mm to 300 mm	0000000	00000

Calipers for Measuring Center-to-Center

Find the exact distance between the centers of two holes without calculating their diameter. The tapered tips of the jaws stay centered in holes and bores for accurate measurements every time. Extend or shorten one jaw to measure parts with uneven surfaces, such as flanged bearings.

With SPC Data Output—Send measurements to a computer or data processor to store, analyze, and manage data. You'll need a data cable or SPC wireless transmitter and receiver.

	Measuring Range		Accuracy		Measuring Increments							Calipers with Calibration Certificate
	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Overall Lg.	Body Material	Jaw Material	Enclosure Rating	Mfr. Model No.		Each
Mitutoyo







				With SPC Data Output

				0.4" to 6.4"	10 to 160	±0.0015"	±0.04 mm	0.0005"	0.01	9"	Stainless Steel	Stainless Steel	IP67	573-705-20	0000000	0000000

Accessories and Replacements for Calipers

SPC Data Cables


Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	Mitutoyo Data Out Switch A × USB-A

USB-A Connection—Plug calipers with SPC data output directly into your computer.

10-Pin Mitutoyo Connector—Connect calipers with SPC data output to a Mitutoyo miniprocessor or multiplexer.

	Lg.		Each
Mitutoyo



	Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	40"	00000000	0000000


	Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	80"	00000000	000000
	Mitutoyo Data Out Switch A × USB-A	80"	000000	000000

SPC Wireless Transmitters

Mitutoyo Data Out Switch A Connection

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a receiver.

Electrical Connection	Mfr. Series		Each
Mitutoyo Data Out Switch A	U-WAVE-T	000000	0000000

SPC Wireless Receivers

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a transmitter.

	For Mfr. Series		Each
Mitutoyo



	USB-A	U-WAVE-T	000000	0000000

Replacement Cases

Mitutoyo

	Material		Each
Mitutoyo



	500-172-30, 500-197-32, 500-475, 500-734-20, 500-753-20, 500-763-20, 500-785, 505-731, 505-737, 505-741, 505-743, 573-701-20, 573-705-20, 573-761-20	Plastic	0000000	000000

Left-Handed Digital Calipers

The display, markings, and thumb wheel face to the right, so you can comfortably work these calipers with your left hand.

With SPC Data Output—Send measurements to a computer to store, analyze, and manage data. You'll need a data cable.

Measuring Range		Accuracy		Measuring Increments					Calipers with Calibration Certificate
Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Overall Lg.	Body Material	Jaw Material		Each







			With SPC Data Output

			0" to 6"	0 to 150	±0.0012"	±0.03 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Stainless Steel	0000000	0000000


			0" to 8"	0 to 200	±0.0012"	±0.03 mm	0.0005"	0.01	11 1/4"	Stainless Steel	Stainless Steel	0000000	000000
			0" to 12"	0 to 300	±0.0012"	±0.03 mm	0.0005"	0.01	15 3/4"	Stainless Steel	Stainless Steel	0000000	000000

Replacement Batteries

Dial Calipers with Fractional Display

No need to memorize conversions. The dial on these calipers lists measurements in both decimals and fractions of an inch. They're especially handy for carpentry and similar jobs that involve measurements down to _1/64".

To calculate your final measurement, simply add the value on the dial to the number on the main scale. These calipers are battery-free, so they’re always ready to use. However, the glass dial and internal components can break if accidentally dropped.

Built-In Backlash Control—The needle stays steady even if the dial is bumped or vibrated for reliably accurate measurements.

										Calipers
Measuring Range	Accuracy	Measuring Increments	Measurement per Dial Rev.	Fractional Increments	Overall Lg.	Body Material	Jaw Material	Dial Face Color	Features		Each



	0" to 6"	±0.001"	0.01"	1"	1/64"	8.75"	Plastic	Plastic	Green/White	—	0000000	000000


	0" to 6"	±0.001"	0.01"	1"	1/64"	9.25"	Stainless Steel	Stainless Steel	White	Built-In Backlash Control	0000000	00000

Calipers for Gear Teeth

Verify the dimensions of a newly cut gear, or test the wear on an old one. The vertical scale measures the depth of a gear’s tooth, while the horizontal scale measures its thickness.

With an LCD display, these calipers give instant measurements—no need to count graduations. Swap between inch and metric or set the position to zero, all with the press of a button.

Dp. Measuring Range		Thk. Measuring Range		Accuracy		Measuring Increments		Overall				Calipers
Inch	Metric, mm	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Lg.	Ht.	Body Material	Jaw Material		Each







			Without SPC Data Output

			0" to 1.44"	0 to 36.7	0" to 1.56"	0 to 39.6	±0.0016"	±0.04 mm	0.0005"	0.01	6 1/2"	6 11/16"	Stainless Steel	Stainless Steel	0000000	0000000

Replacement Batteries

Calipers for Offset Surfaces

Extend or shorten one jaw to measure parts with uneven surfaces, such as flanged bearings.

With SPC Data Output—Send measurements to a computer or data processor to store, analyze, and manage data. You'll need a data cable or SPC wireless transmitter and receiver.

	Measuring Range		Accuracy		Measuring Increments							Calipers with Calibration Certificate
	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Overall Lg.	Body Material	Jaw Material	Enclosure Rating	Mfr. Model No.		Each
Mitutoyo







				With SPC Data Output

				0" to 6"	0 to 150	±0.001"	±0.0254 mm	0.0005"	0.01	9"	Stainless Steel	Stainless Steel	IP67	573-701-20	0000000	0000000

Accessories and Replacements for Calipers

SPC Data Cables


Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	Mitutoyo Data Out Switch A × USB-A

USB-A Connection—Plug calipers with SPC data output directly into your computer.

10-Pin Mitutoyo Connector—Connect calipers with SPC data output to a Mitutoyo miniprocessor or multiplexer.

	Lg.		Each
Mitutoyo



	Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	40"	00000000	0000000


	Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	80"	00000000	000000
	Mitutoyo Data Out Switch A × USB-A	80"	000000	000000

SPC Wireless Transmitters

Mitutoyo Data Out Switch A Connection

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a receiver.

Electrical Connection	Mfr. Series		Each
Mitutoyo Data Out Switch A	U-WAVE-T	000000	0000000

SPC Wireless Receivers

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a transmitter.

	For Mfr. Series		Each
Mitutoyo



	USB-A	U-WAVE-T	000000	0000000

Depth Base Attachments

Mitutoyo

Clamp onto the end of your caliper to steady it while measuring depth.

		Each
Mitutoyo



	0" to 4", 0" to 6", 0" to 8", 0 mm to 100 mm, 0 mm to 150 mm, 0 mm to 200 mm	0000000	000000

Replacement Cases

Mitutoyo

	Material		Each
Mitutoyo



	500-172-30, 500-197-32, 500-475, 500-734-20, 500-753-20, 500-763-20, 500-785, 505-731, 505-737, 505-741, 505-743, 573-701-20, 573-705-20, 573-761-20	Plastic	0000000	000000

Self-Locking Vernier Calipers

Prevent the jaws from creeping forward or backward as you measure. They move only when you press a button, then lock in place when you let go. The button falls naturally under your thumb, so you can operate these calipers comfortably with one hand.

These classic calipers use a sliding vernier scale. Just add the measurement from the main scale to the measurement on the vernier scale to get accurate readings as small as 0.001". Made completely out of metal, they won't break when dropped or short-circuit when wet. They're battery-free, so they're always ready to use.

McMaster-Carr Approved—The performance of brand-name calipers without the cost.

	Measuring Range		Accuracy		Measuring Increments						Calipers
	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Overall Lg.	Body Material	Jaw Material	Mfr. Model No.		Each
Mitutoyo



		0" to 8"	0 to 200	±0.0012"	±0.03 mm	0.001"	0.02	11 1/4"	Stainless Steel	Stainless Steel	531-129	0000000	0000000


		McMaster-Carr Approved



				0" to 6"	0 to 150	±0.0015"	±0.04 mm	0.001"	0.02	9"	Stainless Steel	Stainless Steel	—	0000000	00000

Depth Base Attachments

Mitutoyo

Clamp onto the end of your caliper to steady it while measuring depth.

		Each
Mitutoyo



	0" to 4", 0" to 6", 0" to 8", 0 mm to 100 mm, 0 mm to 150 mm, 0 mm to 200 mm	0000000	000000

Precision-Adjust Vernier Calipers

Move the jaws exactly where you need them. The fine-adjustment wheel opens and closes the jaws in small, precise increments for extra control while measuring.

McMaster-Carr Approved—The performance of brand-name calipers without the cost.

	Measuring Range		Accuracy		Measuring Increments					Calipers
	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Overall Lg.	Body Material	Jaw Material		Each
McMaster-Carr Approved



		0" to 6"	0 to 150	±0.001"	±0.025 mm	0.001"	0.02	7"	Stainless Steel	Stainless Steel	0000000	000000


		0" to 8"	0 to 200	±0.0015"	±0.04 mm	0.001"	0.02	11 1/2"	Stainless Steel	Stainless Steel	0000000	00000
		0" to 12"	0 to 300	±0.0015"	±0.04 mm	0.001"	0.02	16"	Stainless Steel	Stainless Steel	0000000	00000

Calipers for Small Holes and Grooves

Thin as a pencil point, the jaws slip into narrow spaces where standard ones won't fit. These calipers are often used to measure the outer dimensions of grooves in O-rings, pistons, and other small parts.

With SPC Data Output—Send measurements to a computer or data processor to store, analyze, and manage data. You'll need a data cable or SPC wireless transmitter and receiver.

	Measuring Range		Accuracy		Measuring Increments							Calipers		Calipers with Calibration Certificate
	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Overall Lg.	Body Material	Jaw Material	Enclosure Rating	Mfr. Model No.		Each		Each
Mitutoyo







				With SPC Data Output

				0" to 6"	0 to 150	±0.001"	±0.025 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Steel	IP67	573-721-20	000000	0000000	000000	0000000

Accessories and Replacements for Calipers

SPC Data Cables


Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	Mitutoyo Data Out Switch A × USB-A

USB-A Connection—Plug calipers with SPC data output directly into your computer.

10-Pin Mitutoyo Connector—Connect calipers with SPC data output to a Mitutoyo miniprocessor or multiplexer.

	Lg.		Each
Mitutoyo



	Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	40"	00000000	0000000


	Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	80"	00000000	000000
	Mitutoyo Data Out Switch A × USB-A	80"	000000	000000

SPC Wireless Transmitters

Mitutoyo Data Out Switch A Connection

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a receiver.

Electrical Connection	Mfr. Series		Each
Mitutoyo Data Out Switch A	U-WAVE-T	000000	0000000

SPC Wireless Receivers

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a transmitter.

	For Mfr. Series		Each
Mitutoyo



	USB-A	U-WAVE-T	000000	0000000

Depth Base Attachments

Mitutoyo

Clamp onto the end of your caliper to steady it while measuring depth.

		Each
Mitutoyo



	0" to 4", 0" to 6", 0" to 8", 0 mm to 100 mm, 0 mm to 150 mm, 0 mm to 200 mm	0000000	000000

Replacement Cases

Mitutoyo

	Material		Each
Mitutoyo



	500-170-30, 500-171-30, 500-195-30, 500-196-30, 500-474, 500-733-20, 500-752-20, 500-762-20, 500-784, 505-730, 505-738, 505-740, 505-741, 505-742, 573-721-20	Plastic	0000000	000000

Calipers for Tolerance Checking

Quickly check that parts are within tolerance without adjusting the jaws each time. The jaws have a spring-loaded lock, so they stay at your set measurement. Pull the thumb wheel to open them just enough to slide a part in or out. Release and they snap back to their set position.

With SPC Data Output—Send measurements to a computer or data processor to store, analyze, and manage data. You'll need a data cable or SPC wireless transmitter and receiver.

	Measuring Range		Accuracy		Measuring Increments						Calipers
	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Overall Lg.	Body Material	Jaw Material	Mfr. Model No.		Each
Mitutoyo







				With SPC Data Output

				0" to 4"	0 to 100	±0.001"	±0.025 mm	0.0005"	0.01	9 1/4"	Stainless Steel	Stainless Steel	573-281-30	0000000	0000000


				0" to 6"	0 to 150	±0.001"	±0.025 mm	0.0005"	0.01	11 1/2"	Stainless Steel	Stainless Steel	573-282-30	0000000	000000

Accessories and Replacements for Calipers

SPC Data Cables


Mitutoyo Data Out Switch C × 10-Pin Mitutoyo Connector	Mitutoyo Data Out Switch C × USB-A

USB-A Connection—Plug calipers with SPC data output directly into your computer.

10-Pin Mitutoyo Connector—Connect calipers with SPC data output to a Mitutoyo miniprocessor or multiplexer.

	Lg.		Each
Mitutoyo



	Mitutoyo Data Out Switch C × 10-Pin Mitutoyo Connector	40"	0000000	000000


	Mitutoyo Data Out Switch C × 10-Pin Mitutoyo Connector	80"	00000000	00000
	Mitutoyo Data Out Switch C × USB-A	80"	000000	000000

SPC Wireless Transmitters

Mitutoyo Data Out Switch C Connection

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a receiver.

Electrical Connection	Mfr. Series		Each
Mitutoyo Data Out Switch C	U-WAVE-T	000000	0000000

SPC Wireless Receivers

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a transmitter.

	For Mfr. Series		Each
Mitutoyo



	USB-A	U-WAVE-T	000000	0000000

Depth Base Attachments

Mitutoyo

Clamp onto the end of your caliper to steady it while measuring depth.

		Each
Mitutoyo



	0" to 4", 0" to 6", 0" to 8", 0 mm to 100 mm, 0 mm to 150 mm, 0 mm to 200 mm	0000000	000000

Display Freeze Adapters

Save your measurement on the display even after repositioning the caliper.

		Each
Mitutoyo



	500-170-30, 500-171-30, 500-172-30, 500-173, 500-505-10, 500-506-10, 500-507-10, 572-210-30, 572-211-20, 572-213-10	00000000	000000

Static-Control Dial Calipers

Prevent static from damaging sensitive electronics as you measure them. The fiberglass body drains static away from your workpiece so you don't pass along harmful charges.

										Calipers
Measuring Range	Accuracy	Measuring Increments	Measurement per Dial Rev.	Overall Lg.	Body Material	Jaw Material	Dial Face Color	Surface Resistance, ohm	Specs. Met		Each



	0" to 6"	±0.002"	0.001"	0.3"	9 3/4"	Fiberglass	Steel	White	1× 10^6 to 1× 10^9	IEC 61340-5-1	0000000	000000


	0 mm to 150 mm	±0.05 mm	0.1 mm	10 mm	9 3/4"	Fiberglass	Steel	White	1× 10^6 to 1× 10^9	IEC 61340-5-1	0000000	00000

			Pkg.
	Pkg. Qty.		1-9	10-49	50-Up
Replacement CR2032 Lithium Battery	1	0000000	00000	00000	00000