With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer.

Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places.

Despite their size, these rollers handle high radial load capacities without sacrificing speed.

Built to handle high speeds for their size. These track rollers have an outer ring that supports higher speeds than standard-sized track rollers.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

With dry-running PTFE sleeve bearings, these rollers don’t require lubricant. They’re also fully submersible, nonsparking, and lightweight.

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system.

Support and guide loads on angle rails in food, pharmaceutical, and other sanitary environments. Also known as yoke-style cam followers, these track rollers offer more mounting flexibility than threaded alternatives and are typically mounted on shafts and clevis rod ends.

Use these rails with any track rollers that have a 90° V-groove.

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Nylon rollers and aluminum rails make these good for light duty applications.

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

Use these carriages and guide rails for light loads where precise movement is not required.

Mount along a wall or other vertical surface.

Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.

Combine with a T-slotted rail to add linear motion to your assembly.