Track Rollers and Guide Rails
Support loads while guiding and positioning work with these steel rollers and guide rails.
Rollers with a standard shoulder thread directly into a component or insert into mounting hole and fasten with a nut.
Rollers with an adjustable shoulder, also known as eccentric rollers, let you move the roller up and down to align with the track. They're often used alongside rollers with a standard shoulder to correct misalignment.
Carbon steel guide rails already have mounting holes drilled.
Power-coated steel guide rails do not have mounting holes—drill your own where you need them or add mounting brackets (sold separately). To install, weld the bracket to the back of the rail. Use end stops (sold separately) to prevent rollers from overtravel. They are not designed to support loads.
For technical drawings and 3-D models, click on a part number.
Track Rollers | Guide Rails | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | Roller Dia. | Roller Wd. | Hex Wd. | Shoulder Lg. | Ht. Adjustment Capability | Stud Dia., mm | Stud Lg. | Thread Size  | Thread Pitch, mm | Thread Lg. | Max. Temp., °F | Each | Rail Lengths, ft. | Per Ft. | ||
Standard Shoulder | |||||||||||||||||
| 1.02" | 270 | 0.77" | 0.31" | 0.47" | 0.13" | __ | 8 | 0.32" | M8 | 1.25 | 0.32" | 210° | 00000000 | 000000 | 00000000 | 0000000 | |
| 1.58" | 595 | 1.21" | 0.44" | 0.55" | 0.16" | __ | 10 | 0.45" | M10 | 1.5 | 0.45" | 210° | 00000000 | 00000 | 00000000 | 000000 | |
Adjustable Shoulder | |||||||||||||||||
| 1.02" | 270 | 0.77" | 0.31" | 0.47" | 0.22" | 0.024" | 6 | 0.23" | M6 | 1 | 0.23" | 210° | 00000000 | 00000 | 00000000 | 000000 | |
| 1.58" | 595 | 1.21" | 0.44" | 0.55" | 0.27" | 0.03" | 8 | 0.34" | M8 | 1.25 | 0.34" | 210° | 00000000 | 00000 | 00000000 | 000000 | |
Track Rollers | Guide Rails | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | Roller Dia. | Roller Wd. | Hex Wd. | Shoulder Lg. | Stud Dia. | Stud Lg. | Thread Size | Thread Pitch | Thread Lg. | Max. Temp., °F | Each | Rail Lengths, ft. | Per Ft. | ||
Standard Shoulder | ||||||||||||||||
| 1.63" | 300 | 1.38" | 0.38" | 0.56" | 0.425" | 0.3125" | 0.63" | 5/16"-18 | __ | 0.45" | 175° | 00000000 | 000000 | 00000000 | 000000 | |
| 1.63" | 300 | 1.38" | 0.38" | 0.56" | 0.425" | 0.3125" | 0.63" | M8 | 1mm | 0.45" | 175° | 000000000 | 00000 | 00000000 | 00000 | |
Track Rollers | Guide Rails | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | Roller Dia. | Roller Wd. | Hex Wd. | Shoulder Lg. | Ht. Adjustment Capability | Stud Dia., mm | Stud Lg. | Thread Size | Thread Pitch, mm | Thread Lg. | Max. Temp., °F | Each | Rail Lengths, ft. | Per Ft. | ||
Standard Shoulder | |||||||||||||||||
| 1.02" | 270 | 0.77" | 0.31" | 0.47" | 0.13" | __ | 8 | 0.32" | M8 | 1.25 | 0.32" | 210° | 00000000 | 000000 | 00000000 | 0000000 | |
| 1.58" | 595 | 1.21" | 0.44" | 0.55" | 0.16" | __ | 10 | 0.45" | M10 | 1.5 | 0.45" | 210° | 00000000 | 00000 | 00000000 | 000000 | |
| 2.28" | 1,325 | 1.8" | 0.63" | 0.75" | 0.22" | __ | 12 | 0.6" | M12 | 1.75 | 0.6" | 210° | 00000000 | 00000 | 00000000 | 000000 | |
Adjustable Shoulder | |||||||||||||||||
| 1.02" | 270 | 0.77" | 0.31" | 0.47" | 0.22" | 0.024" | 6 | 0.23" | M6 | 1 | 0.23" | 210° | 00000000 | 00000 | 00000000 | 000000 | |
| 1.58" | 595 | 1.21" | 0.44" | 0.55" | 0.27" | 0.03" | 8 | 0.34" | M8 | 1.25 | 0.34" | 210° | 00000000 | 00000 | 00000000 | 000000 | |
| 2.28" | 1,325 | 1.8" | 0.63" | 0.75" | 0.39" | 0.059" | 10 | 0.43" | M10 | 1.5 | 0.43" | 210° | 00000000 | 00000 | 00000000 | 000000 | |
Corrosion-Resistant Track Rollers and Guide Rails
Made of stainless steel, these track rollers and guide rails are more corrosion resistant than steel rollers and rails. Mount along a wall or other vertical surface.
Rollers with a standard shoulder, also known as concentric rollers, thread directly into a component or insert into mounting hole and fasten with a nut.
Rollers with an adjustable shoulder, also known as eccentric rollers, let you move the roller up and down to align with the track. They’re often used alongside rollers with a standard shoulder to correct misalignment.
For technical drawings and 3-D models, click on a part number.
440 Stainless Steel Track Rollers | 316 Stainless Steel Guide Rails | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | Roller Dia. | Roller Wd. | Hex Wd. | Square Wd. | Shoulder Lg. | Ht. Adjustment Capability | Stud Dia., mm | Stud Lg. | Thread Size | Thread Pitch, mm | Thread Lg. | Max. Temp., °F | Each | Rail Lengths, ft. | Per Ft. | ||
Standard Shoulder | ||||||||||||||||||
| 1.16" | 85 | 0.9" | 0.28" | 0.4" | __ | 0.18" | __ | 5 | 0.5" | M5 | 0.8 | 0.5" | 210° | 00000000 | 000000 | 00000000 | 000000 | |
| 1.83" | 175 | 1.4" | 0.43" | __ | 1/2" | 0.2" | __ | 6 | 0.5" | M6 | 1 | 0.5" | 210° | 00000000 | 00000 | 00000000 | 00000 | |
Adjustable Shoulder | ||||||||||||||||||
| 1.16" | 85 | 0.9" | 0.28" | 0.4" | __ | 0.18" | 0.031" | 5 | 0.5" | M5 | 0.8 | 0.5" | 210° | 00000000 | 00000 | 00000000 | 00000 | |
| 1.83" | 175 | 1.4" | 0.43" | 1/2" | __ | 0.2" | 0.031" | 6 | 0.5" | M6 | 1 | 0.5" | 210° | 00000000 | 00000 | 00000000 | 00000 | |
Light Duty Track Rollers and Guide Rails
Nylon rollers and aluminum rails make these good for light duty applications. Mount along a wall or other vertical surface.
Rollers with a standard shoulder thread directly into a component or insert into mounting hole and fasten with a nut.
Rollers with an adjustable shoulder, also known as eccentric rollers, let you move the roller up and down to align with the track. They're often used alongside rollers with a standard shoulder to correct misalignment.
For technical drawings and 3-D models, click on a part number.
Nylon Plastic Track Rollers | Anodized Aluminum Guide Rails | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | Roller Dia. | Roller Wd. | Hex Wd. | Shoulder Lg. | Ht. Adjustment Capability | Stud Dia., mm | Stud Lg. | Thread Size | Thread Pitch, mm | Thread Lg. | Max. Temp., °F | Each | Rail Lengths, ft. | Per Ft. | ||
Standard Shoulder | |||||||||||||||||
| 0.79" | 5 | 0.58" | 0.25" | 0.43" | 0.12" | __ | 6 | 0.3" | M6 | 1 | 0.3" | 155° | 00000000 | 000000 | 00000000 | 000000 | |
| 1.02" | 10 | 0.77" | 0.31" | 0.47" | 0.13" | __ | 8 | 0.32" | M8 | 1.25 | 0.32" | 155° | 00000000 | 00000 | 00000000 | 00000 | |
| 1.58" | 15 | 1.21" | 0.44" | 0.55" | 0.16" | __ | 10 | 0.45" | M10 | 1.5 | 0.45" | 155° | 000000000 | 00000 | 00000000 | 00000 | |
Adjustable Shoulder | |||||||||||||||||
| 0.79" | 5 | 0.58" | 0.25" | 0.43" | 0.12" | 0.032" | 5 | 0.21" | M5 | 0.8 | 0.21" | 155° | 000000000 | 00000 | 00000000 | 00000 | |
| 1.02" | 10 | 0.77" | 0.31" | 0.47" | 0.13" | 0.033" | 6 | 0.23" | M6 | 1 | 0.23" | 155° | 000000000 | 00000 | 00000000 | 00000 | |
| 1.58" | 15 | 1.21" | 0.44" | 0.55" | 0.16" | 0.038" | 8 | 0.34" | M8 | 1.25 | 0.34" | 155° | 000000000 | 00000 | 00000000 | 00000 | |
Angle Rails for V-Groove Track Rollers
Use these rails with any track rollers that have a 90° V-groove. The bottom can be drilled for mounting.
420 stainless steel rails are more corrosion resistant than steel rails. Use them in areas where frequent washdowns with harsh cleaners take place.
Rails with a Rockwell hardness rating offer improved wear resistance over unhardened rails. The higher the hardness rating, the harder the metal.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Angle Ht. | 1 ft. | 2 ft. | 3 ft. | 4 ft. | 5 ft. | 6 ft. | |
Steel | |||||||||
| 7/16" | 3/16" | 1/8" | 00000000 | ||||||
| 5/8" | 1/4" | 3/16" | 000000 | ||||||
| 7/8" | 11/32" | 1/4" | 000000 | ||||||
| 1 1/16" | 7/16" | 5/16" | 000000 | ||||||
Steel with Rockwell C53 Hardness | |||||||||
| 5/8" | 1/4" | 3/16" | 000000 | ||||||
| 7/8" | 11/32" | 1/4" | 000000 | ||||||
| 1 1/16" | 7/16" | 5/16" | 000000 | ||||||
420 Stainless Steel | |||||||||
| 5/8" | 1/4" | 3/16" | 00000000 | ||||||
| 7/8" | 11/32" | 1/4" | 00000000 | ||||||
420 Stainless Steel with Rockwell C40 Hardness | |||||||||
| 5/8" | 1/4" | 3/16" | 00000000 | ||||||
| 7/8" | 11/32" | 1/4" | 00000000 | ||||||