Store and dispense liquids in food, pharmaceutical, and beverage plants—these tanks attach to a compressed air source for use in sanitary environments.

These plastic batch cans meet NSF/ANSI 2 sanitary standards for food environments.

Use propane in heating, thawing, and soldering applications.

Propylene produces the highest flame temperature and is better than propane for brazing applications.

Safely transport and store oxygen in these tanks.

Safely transport and store propane gas in these tanks.

These steel filter bag housings have heavy duty construction and are more durable than our other metal housings.

Constructed for use with liquids and gases in boilers and pressure vessels.

These housings are clear so you can monitor collecting debris without stopping flow.

Made of pure polypropylene, these filter bag housings don’t contain additives or fillers that can leach into your process line.

There's no need to stop your water supply and disassemble these filters for cleaning. Turn the handle to flush debris from the cartridge and purge dirty water through the drain at the bottom.

Swap cartridges with a turn of your wrist—these filter housings come with a cartridge that connects directly to the filter housing cover.

Made from pure polypropylene, this filter housing doesn't contain fillers, colorants, or plasticizers that can leach into deionized water.

Prepare water for use in beverages, food preparation, and ice production with these filters. They remove particles that cause unpleasant tastes and odors.

Also known as reverse osmosis water filters, these include several cartridges to reduce odor, rust, sediment, and lead from drinking water, as well as a tank to store filtered water.

Supply your own cartridge to filter contaminants.

These filter housings come with a cartridge that removes particles, rust, scale, and sediment from gasoline and diesel fuel, including fuels with ethanol.

Remove contaminants, moisture, and other particles from steam that will touch food and for final filtering in pharmaceutical, biotech, and electronics applications.

Flip the lid to grab a wipe. These dispensers are often used in food-processing and pharmaceutical plants because they contain metal and chemical additives, so if any part of them falls into your line by accident, it’ll set off metal detectors and show up on X-rays.

Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

Eliminate dirt, oil, and grease buildup in electrical equipment such as relays, switches, and cables.

Clean and condition wood surfaces, leaving a wax-free shine.

These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

With a clear polycarbonate bowl that’s visible from all angles and silica gel desiccant that changes from blue to pink, it’s easy to see when it’s time to change the cartridge on these dryer/filters and dryer/filter/regulators.

Once aftercoolers and separators have removed the bulk of the water, use these dryers to remove any remaining moisture in your air line.

For use with Norgren modular compressed air systems, once aftercoolers and separators have removed the bulk of the water, use one of these desiccant-filled dryers to remove any remaining moisture in your air line.

Know when it's time to reactivate these desiccants—they turn from blue to pink when they reach maximum moisture absorption.

Use your compressed air source to power these blowers.

In addition to blowing twice as much air as other portable blowers, these have a motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups E, F, and G hazardous locations.

Store and transport ducting.

Also known as spin-on filters, cartridges thread directly onto the filter head.

Mount to the top of a tank to clean hydraulic fluid in return lines.