Fasten these clips around the rim of a paint can to hold the lid in place.

A self-closing faucet provides controlled, one-handed dispensing of liquids.

Tip cans down for controlled dispensing, then swing them back to their upright position.

For temporary storage of oil- and solvent-soaked towels and brushes, these containers protect flammable contents from potential fire sources and spontaneous combustion.

These containers have two molded-in side handles and a durable bottom that stands up to dragging across the floor.

Often used in high-traffic environments, such as parking lots and cafeterias, these waste containers are dent resistant.

Open these plastic waste containers with your foot to discard trash without touching the lid.

Wheel away waste in these large-capacity containers. Made of seamless heavy duty plastic, they resist cracks, dents, and leaks.

Open these waste containers with a wave of your hand. The motion-activated sensor lifts the lid and lowers it automatically.

Shipped flat so you can keep plenty of extras on hand, these cardboard containers have a self-locking base for fast assembly.

These containers are marked with a recycling symbol to distinguish them from waste containers.

These containers have two molded-in side handles and a durable bottom that stands up to dragging across the floor.

Recycle your nonleaking magnetic and electronic ballasts. Use the paid shipping label to send the ballasts to a recycling facility.

Recycle up to 45 lbs. of disposable gloves—these containers keep all of your used gloves isolated to prevent the spread of contaminants in your facility.

The spring-loaded, self-closing cap on these cans automatically vents to relieve excess vapor pressure, and a flame arrester protects against outside ignition.

Easily fill these cans through the detachable wide-mouth funnel, then remove the threaded plug to empty. A flame arrester protects against outside ignition.

Insert scalpel and then press the button to remove the blade.

Securely dispose of confidential materials. These containers are lockable and have a slot in the lid to slip in documents.

Mount the funnel on the telescoping tube to help direct up to 8 gallons of liquid into the jug without splattering.

These carboys are fluorinated to prevent contents from being absorbed.

Store a large quantity of liquid in these bottles and use the built-in faucet to dispense.

These corrosion-resistant cans have a built-in faucet for dispensing.

Use the built-in faucet for easy dispensing.

Dispense liquids using the built-in faucet.

These drums are UN-compliant for shipping.

The inside of these drums is epoxy coated to resist rust.

These drums have smooth, welded seams to prevent food and chemicals from collecting in crevices.

Clamp lids onto sanitary stainless steel drums using these leverlock closing rings, which create a tight seal and are easy to put on and take off.

Seal lids onto sanitary drums. These silicone seals are FDA compliant for direct contact with food.

Ship materials in these UN-compliant drums.

These tubs are crack and dent resistant.

Mix and store noncorrosive flammable liquids, such as paints and lacquers.

Pails are often used in food-processing applications.

This pail has a brass handle that inhibits sparking and is nonmagnetic. It is often used with oil and solvents.

The bottom of these tanks is sloped to ensure easy and complete drainage.

Fill air-atomizing sprayers with these pitchers. The nozzle is designed to fit into the sprayer opening and has a removable brass filter to strain out foreign particles.

Add a straw to an aerosol can for precise applications or replace a lost or clogged straw.

An electrostatic charging ring in these backpack sprayers gives spraying liquids a positive charge, so that disinfectant or insecticide will cling to surfaces for an even coating.

To save time and effort when disinfecting bathrooms, worksites, and other large spaces, these sprayers are electric powered, so you don’t need to pump them by hand.

Carry these sprayers comfortably on your back using the padded shoulder straps.

A rechargeable battery keeps these sprayers pressurized, so you don’t have to stop to pump while spraying herbicides, insecticides, disinfectants, cleaners, and other solutions.

Spray liquids with these fillable bottles—the head twists on and off to make filling easy.

Dispense flammable liquids with these FM-approved push-top dispensers.

An additive prevents electrostatic discharge from building up on the surface of these dispensers.

Squeeze the ball to create pressure, then push down on the dispenser to dispense flammable liquids into vials, test tubes, and other small containers. Only a PTFE tube and stainless steel pump come into contact with the liquid.

These pails come matched with UN-specified lids.

These polyethylene pails have a twist-lock lid that opens and closes without tools and provides a more secure seal than a snap-lock lid.

Prevent the absorption and permeation of chemicals with these fluorinated pails.

The jug in these kits holds its shape as liquid is dispensed. It comes with a cardboard box for protection.

Also known as closed-head pails, these rectangular jugs have a small top opening. Use them to safely ship hazardous liquids.

Clean hard-to-reach and tight spaces with a burst of air.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time.

These dispensers have an opening for filling without removing the nozzle.