Material Material | Show |
---|
|
Material Material | Hide |
---|
|
System of Measurement System of Measurement |
---|
|
Capacity Capacity |
---|
Diameter Diameter |
---|
Height Height |
---|
For Use With For Use With |
---|
|
With Handle With Handle |
---|
|
Graduated Graduated |
---|
|
Lid Material Lid Material |
---|
|
Finish Finish |
---|
|
Environment Environment |
---|
|
Specifications Met Specifications Met |
---|
|
Maximum Pressure Maximum Pressure |
---|
|
Hose Length Hose Length |
---|
|
Hose Material Hose Material |
---|
|
Use these cryogenic containers to store, transport, and dispense liquid nitrogen. Also known as dewars, their welded, double-aluminum walls are vacuum-insulated for maximum thermal protection.
Keep outdoor smoking areas tidy with these weather-resistant containers. The narrow neck restricts oxygen flow to extinguish internal fires, while the broad base provides stability. Lift the top off the base to empty.
Aluminum bottles are more corrosion resistant than tin-plated steel.
Beakers that meet NSF/ANSI 2 comply with a sanitary standard for food equipment.
These metal batch cans meet NSF/ANSI 2 for sanitary design in food-processing environments.
Batch Cans | Lids | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Dia. | Ht. | Bottom ID | Gauge | Appearance | Specifications Met | Each | Lid Type | Each | ||
Aluminum | |||||||||||
2 1/2 gal. | 10" | 8" | 8" | 7 | Dull | NSF/ANSI 2 | 0000000 | 000000 | Loose Fitting | 0000000 | 000000 |
5 gal. | 12 1/4" | 11" | 11" | 7 | Dull | NSF/ANSI 2 | 0000000 | 00000 | Loose Fitting | 0000000 | 00000 |
10 gal. | 15 1/2" | 14 3/4" | 14 3/4" | 7 | Dull | NSF/ANSI 2 | 0000000 | 000000 | Loose Fitting | 0000000 | 00000 |
15 gal. | 17 3/4" | 16 1/4" | 16 1/4" | 7 | Dull | NSF/ANSI 2 | 0000000 | 000000 | Loose Fitting | 0000000 | 00000 |
Also known as vacuum degassing chambers, these remove trapped air from mixtures such as paint and mold resins. The fittings on the hose contain a gasket that allows you to connect the hose to flared fittings.
Aluminum containers are lightweight, corrosion resistant, and good for general use.
Containers with a side-mount gauge allow you to see the material inside of them when looking from the top.
Glass lids resist corrosion. They’re primarily used to eliminate air bubbles in woodworking projects that use harsh chemicals, which would deteriorate plastic lids. Glass lids are less durable than acrylic lids.
Acrylic lids are more durable than glass lids. They’re commonly used to eliminate air bubbles in hard setting materials, such as silicone and polyurethane.
Replacement lids do not include hardware or seal.
Replacement manifold assemblies include a manifold, vacuum gauge, washer, O-ring, and hex nut.
Containers | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gauge | Hose | Replacement Lids | |||||||||||||||||
Cap. | Dia. | Ht. | Bottom ID | Vacuum Range, in. of Hg | Accuracy | Grad. Marks, in. of Hg | Lg. | Thread Size | Gender | For Connection Style | For Flared Angle | For Tube OD | Max. Temp., °F | Removes Particle Size Down To | Includes | Each | Each | ||
Aluminum with Top-Mount Gauge | |||||||||||||||||||
Acrylic Plastic Lid with Silicone Rubber Seal | |||||||||||||||||||
2 gal. | 10 3/4" | 7 1/2" | 10" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 0000000 | 0000000 | 000000 |
3 gal. | 10 3/4" | 9" | 10" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 00000 |
5 gal. | 12 3/4" | 11 1/2" | 12" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 00000 |
7 gal. | 16 3/4" | 9 3/4" | 16" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 000000 |
10 gal. | 15 1/4" | 17" | 14" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 000000 |
15 gal. | 16 3/4" | 18 1/2" | 16 1/8" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 000000 |
Aluminum with Side-Mount Gauge | |||||||||||||||||||
Glass Lid with Silicone Rubber Seal | |||||||||||||||||||
2 gal. | 10 3/4" | 7 1/2" | 10" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 00000 |
3 gal. | 10 1/4" | 9 3/4" | 10" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 000000 | 00 |
5 gal. | 12 3/8" | 11 1/2" | 12" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 000000 |
Acrylic Plastic Lid with Silicone Rubber Seal | |||||||||||||||||||
2 gal. | 10 3/4" | 7 1/2" | 10" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 00000 |
3 gal. | 10 3/4" | 9" | 10" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 00000 |
10 gal. | 15 1/4" | 17" | 14" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 000000 |
Gauge Mounting Location | Each | |
Side | 0000000 | 000000 |
Removes Particle Size Down To | Each | |
50 microns | 0000000 | 00000 |
Spray thin liquids evenly without propellant. Fill the sprayer and pressurize with compressed air.
Sprayers | Repair Kits | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., oz. | Dispensing Type | Dia. | Ht. | Seal Material | Color | Pressure Range, psi | Includes | Each | Each | |||
For Use With Water-Based Liquids | ||||||||||||
Nickel-Plated Aluminum | ||||||||||||
A | 16 | Mist, Stream | 3" | 9 1/4" | Viton® Fluoroelastomer Rubber | __ | 80-145 | Eight Mist Nozzles, One Pin-Stream Nozzle | 000000 | 000000 | 0000000 | 000000 |
Powder-Coated Aluminum | ||||||||||||
A | 16 | Mist, Stream | 3" | 9 1/4" | Viton® Fluoroelastomer Rubber | Red | 80-145 | Eight Mist Nozzles, One Pin-Stream Nozzle | 000000 | 00000 | 0000000 | 00000 |
For Use With Water-Based Liquids, Oil, and Solvents | ||||||||||||
Painted Aluminum | ||||||||||||
C | 24 | Mist, Stream | 3 1/2" | 10 3/4" | PTFE Plastic | Black | 80-145 | __ | 00000000 | 00000 | 0000000 | 00000 |
32-oz. Plastic Pitcher for Air-Atomizing Sprayers | 0000000 | Each | 000000 |
A unique valve on these pens and bottles releases a precise amount of liquid without flooding the tip and splattering. They are often filled with adhesives, lubricants, and water-based liquids.
Aluminum bottle and pen are ESD safe for use with sensitive parts and equipment.