Container Type Container Type |
---|
![]() | ![]() |
Bottle | Aerosol Can |
![]() | ![]() |
Tube | Brush-Top Can |
![]() | ![]() |
Jug | Syringe |
![]() | ![]() |
Can | Pail |
![]() | ![]() |
Brush-Top Bottle | Spray Bottle |
![]() | ![]() |
Stick | Single-Use Packet |
![]() | ![]() |
Cartridge | Roll |
For Use On For Use On |
---|
For Joining For Joining |
---|
Manufacturer Model Number Manufacturer Model Number |
---|
Consistency Consistency |
---|
|
|
Formulation Formulation |
---|
Adhesive Type Adhesive Type |
---|
|
|
Maximum Temperature Maximum Temperature |
---|
|
Begins to Harden Begins to Harden |
---|
|
|
|
Container Size Container Size |
---|
|
Reaches Full Strength Reaches Full Strength |
---|
|
|
|
Clarity Clarity |
---|
|
Shear Strength Shear Strength |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
Approximate Coverage Approximate Coverage |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Viscosity Viscosity |
---|
Minimum Temperature Minimum Temperature |
---|
|
|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Structural Adhesives
More
About Finishing
More
About Paint and Protective Coatings
More
Flexible Instant-Bond Adhesives

Accommodate joint movement with these adhesives that remain pliable when cured. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Elongation | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | ||||||||||||
4851 | 0.7 | Bottle | 0.006" | 20 sec. | 24 hrs. | Thin Liquid (380 cP) | 85% | -65° to 120° | Clear | Composites, Fabric, Metal, Plastic, Rubber | 00000000 | 000000 |
4861 | 0.7 | Bottle | 0.008" | 20 sec. | 24 hrs. | Thick Liquid (4,250 cP) | 85% | -65° to 120° | Clear | Composites, Fabric, Metal, Plastic, Rubber | 00000000 | 00000 |
Instant-Bond Adhesives


Also known as super glue, these adhesives bond quickly. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
401 | 0.1 | Tube | 0.005" | 15 sec. | 24 hrs. | Thin Liquid (110 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
401 | 0.7 | Bottle | 0.005" | 15 sec. | 24 hrs. | Thin Liquid (110 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
401 | 16 | Bottle | 0.005" | 15 sec. | 24 hrs. | Thin Liquid (110 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
4471 | 0.7 | Bottle | 0.008" | 15 sec. | 24 hrs. | Thin Liquid (630 cP) | -65° to 180° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
4471 | 16 | Bottle | 0.008" | 15 sec. | 24 hrs. | Thin Liquid (630 cP) | -65° to 180° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
Skin-Guard Instant-Bond Adhesives

Make strong, instant bonds on a variety of materials—but not your skin. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
0.07 | Tube | 0.006" | 10 sec. | 24 hrs. | Thin Liquid (40 cP) | -65° to 160° | Clear | Ceramic, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
Toughened Instant-Bond Adhesives

Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
435 and 438 work on porous materials such as wood, paper, and fabric.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
438 | 0.7 | Bottle | 0.006" | 30 sec. | 24 hrs. | Thin Liquid (180 cP) | -65° to 220° | Black | Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
Quick-Set Instant-Bond Adhesives


Form bonds in 5 seconds or less with these adhesives, also known as super glue. Use an accelerator (sold separately) to shorten the time it takes to reach full strength.
SF100 bonds dirty or oily surfaces.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | Specifications Met | For Joining | Each | |
3M Scotch-Weld Adhesives | ||||||||||||
SF100 | 0.1 | Tube | 0.006" | 4 sec. | 24 hrs. | Thin Liquid (80 cP) | -65° to 180° | Clear | Commercial Standard A-A-3097 | Fabric, Plastic, Rubber, Wood | 00000000 | 00000 |
SF100 | 0.7 | Bottle | 0.006" | 4 sec. | 24 hrs. | Thin Liquid (80 cP) | -65° to 180° | Clear | Commercial Standard A-A-3097 | Fabric, Plastic, Rubber, Wood | 00000000 | 00000 |
Quick-Set Wicking Instant-Bond Adhesives

For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives. Also known as super glue, they have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | Specifications Met | For Joining | Each | |
3M Scotch-Weld Adhesives | ||||||||||||
SF20 | 0.7 | Bottle | 0.004" | 4 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 180° | Clear | Commercial Standard A-A-3097 | Fabric, Plastic, Rubber, Wood | 00000000 | 000000 |
Loctite® Adhesives | ||||||||||||
4501 | 0.7 | Bottle | 0.004" | 5 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 180° | Clear | __ | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
Wicking Instant-Bond Adhesives


These thin liquids, also known as super glue, flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
406 | 0.1 | Tube | 0.004" | 15 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
406 | 0.7 | Bottle | 0.004" | 15 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
406 | 16 | Bottle | 0.004" | 15 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
Instant-Bond Adhesive Gel for Hard-to-Bond Materials



Quickly adhere hard-to bond surfaces with these adhesives, also known as super glue. These thick gels fill gaps between parts and won't drip on vertical surfaces. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Dispense adhesives in syringes with a plunger (sold separately).
Dispense adhesives in cartridges with a standard caulk gun.
SI Gel bonds dirty and oily surfaces.
454 and 4541 are suitable for porous and dissimilar materials.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3M Scotch-Weld Adhesives | |||||||||||
SI Gel | 0.7 | Tube | 0.02" | 20 sec. | 24 hrs. | Gel (125,000 cP) | -65° to 180° | Clear | Fabric, Plastic, Rubber, Wood | 00000000 | 000000 |
Loctite® Adhesives | |||||||||||
454 | 0.1 | Tube | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 0000 |
454 | 0.3 | Syringe | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
454 | 0.7 | Tube | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
454 | 1 | Syringe | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
454 | 7 | Tube | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
454 | 10.5 | Cartridge | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
Contact Adhesives


Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
3M Adhesives | |||||||||||||
1099 | 32 fl. oz. | Can | 40 min. | 72 hrs. | 3,405 | Thick Liquid | 3,000 | -10° to 230° | Beige | Fabric, Foam, Plastic, Rubber | __ | 00000000 | 000000 |
1099 | 1 gal. | Can | 40 min. | 72 hrs. | 3,405 | Thick Liquid | 3,000 | -10° to 230° | Beige | Fabric, Foam, Plastic, Rubber | __ | 00000000 | 000000 |
4475 | 32 fl. oz. | Can | 10 min. | 72 hrs. | Not Rated | Thick Liquid | 8,500 | -10° to 230° | Clear | Ceramic, Fabric, Glass, Plastic, Rubber | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, CT, DC, DE, MA, MD, ME, NJ, NY, PA, RI, UT, Northern VA, VT | 00000000 | 000000 |
Pliobond Adhesives | |||||||||||||
35 | 8 fl. oz. | Brush-Top Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | __ | 0000000 | 00000 |
35 | 16 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | __ | 0000000 | 00000 |
35 | 32 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 0000000 | 00000 |
35 | 1 gal. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 0000000 | 000000 |
Adhesives | |||||||||||||
__ | 4 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 180° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 8 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 180° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 16 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 180° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 32 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 180° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 000000 | 00000 |
__ | 1 gal. | Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 180° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 000000 | 000000 |
Quick-Set Contact Adhesives

Bonds reach full strength in 10 minutes. Apply this adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, gal. | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | For Joining | Color | Each | |
3M Adhesives | ||||||||||||
1000NF | 1 | Jug | 60 sec. | 10 min. | 400 | Thin Liquid | 750 | 60° to 80° | Fabric, Foam, Wood | Purple | 00000000 | 0000000 |
High-Strength Spray Adhesives

Form bonds with twice the strength of our other spray adhesives. Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to adhere.
Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Temp. Range, °F | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Net Weight, oz. | Approximate Coverage | Inverted Dispensing | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Min. | Max. | Color | For Joining | Cannot Be Sold To | 1-11 | 12-Up | |
3M Adhesives | ||||||||||||||
90 | 12.23 | 19 sq. ft. @ 2.5 gm/ft² | No | 60 sec. | 24 hrs. | 600 | 0° | 250° | Clear | Ceramic, Composites, Glass, Metal, Plastic, Rubber | CA | 0000000 | 000000 | 000000 |
Spray Adhesives
Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.
Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Net Weight, oz. | Approximate Coverage | Inverted Dispensing | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | 1-11 | 12-Up | |
3M Adhesives | |||||||||||||
74 | 16.9 | 26 sq. ft. @ 2.5 gm/ft² | No | 30 sec. | 24 hrs. | 200 | 0° to 200° | Clear | Fabric, Foam | CA | 0000000 | 000000 | 000000 |
74 | 16.9 | 26 sq. ft. @ 2.5 gm/ft² | No | 30 sec. | 24 hrs. | 200 | 0° to 200° | Orange | Fabric, Foam | CA | 0000000 | 00000 | 00000 |
74 | 16.9 | 26 sq. ft. @ 2.5 gm/ft² | Yes | 30 sec. | 24 hrs. | 200 | 0° to 200° | Orange | Fabric, Foam | CA | 00000000 | 00000 | 00000 |
74CA | 19 | 29 sq. ft. @ 2.5 gm/ft² | No | 30 sec. | 24 hrs. | 200 | 0° to 200° | Clear | Fabric, Foam | __ | 0000000 | 00000 | 00000 |
74CA | 19 | 29 sq. ft. @ 2.5 gm/ft² | No | 30 sec. | 24 hrs. | 200 | 0° to 200° | Orange | Fabric, Foam | __ | 0000000 | 00000 | 00000 |
77 | 13.44 | 21 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | 300 | 0° to 150° | Clear | Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood | CA | 0000000 | 00000 | 00000 |
77 | 16.8 | 26 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | 300 | 0° to 150° | White | Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood | CA | 0000000 | 00000 | 00000 |
77CA | 18 | 28 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | 300 | 0° to 150° | Clear | Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood | __ | 0000000 | 00000 | 00000 |
94ET | 19.8 | 31 sq. ft. @ 2.5 gm/ft² | No | 10 min. | 24 hrs. | 300 | 0° to 210° | Clear | Ceramic, Composites, Glass, Metal, Plastic | __ | 0000000 | 00000 | 00000 |
Spray Adhesives for Viton® Fluoroelastomer Rubber

Splice rubber O-rings and other gaskets with this chemical resistant adhesive. It cannot be sold to Canada due to chemical regulations.
Container Net Weight, oz. | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
12 | 19 sq. ft. @ 2.5 gm/ft² | 5 sec. | 48 hrs. | 150 | -40° to 400° | Black | Ceramic, Fabric, Metal, Rubber, Wood | Canada | 000000 | 000000 |
Temporary Positioning Spray Adhesives

Spray a coating of this glue onto one surface to temporarily hold small parts. It forms a strong bond, but will not harden completely until 24 hours later.
Container Net Weight, oz. | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear Strength | Max. Temp., °F | Color | For Joining | Each | |
Gorilla Adhesives | |||||||||
---|---|---|---|---|---|---|---|---|---|
14 | 400 sq. ft. @ 1 gm/ft² | 5 min. | 24 hrs. | Not Rated | 90° | Clear | Fabric, Metal | 0000000 | 000000 |
Urethane Structural Adhesives
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
The size listed is the combined total of the two parts.

Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Plastic Bonder | 50139 | 0.85 | Syringe | 15 min. | 30 min. | 1,000 | Not Rated | 1:1 | Thick Liquid (50,000 cP) | -20° to 250° | Black | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood | 000000 | 00000 |
Waterproof Epoxy Structural Adhesives
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
The size listed is the combined total of the two parts.

Mfr. Model | Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
MarineWeld | 50172 | 0.85 | Syringe | 5 min. | 1 hrs. | 1,800 | Not Rated | 1:1 | Paste (100,000 cP) | -20° to 300° | White | Salt Spray, Submersible | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 000000 | 00000 |
Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts.
DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.

Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
2 Ton Epoxy | 14310 | 0.84 | Syringe | 8 min. | 16 hrs. | 2,250 | 2 | 1:1 | Thick Liquid (8,000 cP) | -40° to 200° | Clear | Metal, Metal to Plastic, Metal to Composites, Plastic, Plastic to Composites, Composites | 0000000 | 000000 |
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
50132 works especially well on plastics and composites.



Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
5 Minute Epoxy | 14200 | 15 | Bottle | 5 min. | 12 hrs. | 1,900 | 2 | 1:1 | Thick Liquid (10,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 000000 | 000000 |
5 Minute Epoxy | 14250 | 0.84 | Syringe | 5 min. | 12 hrs. | 1,900 | 2 | 1:1 | Thick Liquid (10,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 0000000 | 00000 |
5 Minute Epoxy | 14270 | 1.69 | Cartridge | 5 min. | 12 hrs. | 1,900 | 2 | 1:1 | Thick Liquid (10,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 00000000 | 00000 |

Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
PlasticWeld | 50132 | 0.85 | Syringe | 5 min. | 60 min. | 2,000 | Not Rated | 1:1 | Thick Liquid (9,000 cP) | -20° to 300° | Yellow | Metal, Plastic, Rubber, Composites, Masonry, Wood | 000000 | 00000 |
High-Temperature Glue



This high-temperature glue sticks quickly, but can be repositioned for up to 2 hours before it begins to harden. Glue can be applied and allowed to dry, then reactivated with water when ready for bonding. It cannot be sold to Canada due to import regulations.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
4 fl. oz. | Bottle | 2 hrs. | 12 hrs. | Thick Liquid | -30° to 500° | Beige | Cardboard, Fabric, Glass, Metal, Wood | Canada | 0000000 | 000000 |
32 fl. oz. | Bottle | 2 hrs. | 12 hrs. | Thick Liquid | -30° to 500° | Beige | Cardboard, Fabric, Glass, Metal, Wood | Canada | 000000 | 00000 |
1 gal. | Pail | 2 hrs. | 12 hrs. | Thick Liquid | -30° to 500° | Beige | Cardboard, Fabric, Glass, Metal, Wood | Canada | 000000 | 00000 |
5 gal. | Pail | 2 hrs. | 12 hrs. | Thick Liquid | -30° to 500° | Beige | Cardboard, Fabric, Glass, Metal, Wood | Canada | 000000 | 000000 |
Temporary Glue for Sanding Discs

Bond sanding discs with a paper, cloth, or fiber backing to backup pads. This glue removes cleanly, so it's easy to change to another disc. It cannot be sold to the regions listed because it exceeds local regulatory limits on VOCs (volatile organic compounds).
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Consistency | Max. Temp., °F | Color | For Disc Abrasive Backing Material | Cannot Be Sold To | Each | |
5 | Tube | 5 min. | 15 min. | Thick Liquid | 140° | White | Cloth, Paper, Fiber | CA, Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 000000 | 000000 |
Putty-to-Rubber Moldable Glue


This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
0.12 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -40° to 355° | Blue, Red, Yellow | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 000000 |
0.12 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -40° to 355° | Gray | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
0.12 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -40° to 355° | White | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
Glue
Use these glues for general purpose bonding and repairs.
3M glue cannot be sold to California due to local regulatory limits on VOCs (volatile organic compounds).

Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Max. Temp., °F | Color | For Joining | Cannot Be Sold To | Each | |
27 | 13 | Aerosol Can | 15 sec. | 24 hrs. | 140° | Clear | Fabric, Metal, Plastic, Rubber, Wood | CA | 00000000 | 000000 |
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Max. Temp., °F | Color | For Joining | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
27 | 13 | Aerosol Can | 15 sec. | 24 hrs. | 140° | Clear | Fabric, Metal, Plastic, Rubber, Wood | CA | 12 | 00000000 | 0000000 |
Cement for Abrasive Grains

Coat cotton, canvas, and felt buffing wheels with this cement, then apply abrasive grains.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Begins to Harden | Reaches Full Strength | Consistency | Viscosity | Temp. Range | Color | For Joining | Each | |
1 | Pail | 30 min. | 24 hrs. | Thin Liquid | Not Rated | Not Rated | Brown | Fabric | 000000 | 000000 |
Flexible Hot-Melt Glue Sticks

This glue remains flexible after curing to accommodate joint movement. Glue that is FDA compliant 21 CFR 175.105 is suitable for food packaging.
Dia. | Lg. | Begins to Harden | Reaches Full Strength | Application Temp. Range, °F | Consistency | Viscosity, cP | Elongation | Color | Specifications Met | For Joining | Approx. No. of Sticks per lb. | 1 lbs. | 5 lbs. | 25 lbs. | |
Glue | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
7/16" | 10" | 60 sec. | 24 hrs. | 350° to 390° | Thick Liquid | 5,375 | 1,300% | Clear | FDA Compliant 21 CFR 175.105 | Ceramic, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 18 | 0000000 |
Fast-Hardening Hot-Melt Glue Sticks

Glue hardens in 15 seconds or less to bond quickly. Made of FDA listed materials, it is suitable for food packaging.
Dia. | Lg. | Begins to Harden | Reaches Full Strength | Application Temp. Range, °F | Consistency | Viscosity, cP | Color | Specifications Met | For Joining | Approx. No. of Sticks per lb. | 1 lbs. | 5 lbs. | 25 lbs. | |
7/16" | 4" | 15 sec. | 24 hrs. | 250° to 380° | Thick Liquid | 5,000 | Beige | FDA Compliant 21 CFR 175.105 | Cardboard, Fabric | 45 | 0000000 | |||
7/16" | 15" | 5 sec. | 24 hrs. | 250° to 300° | Thin Liquid | 1,160 | Beige | FDA Compliant 21 CFR 175.105 | Cardboard, Fabric | 10 | 0000000 | |||
7/16" | 15" | 15 sec. | 24 hrs. | 250° to 380° | Thick Liquid | 5,000 | Beige | FDA Compliant 21 CFR 175.105 | Cardboard, Fabric | 10 | 0000000 | |||
5/8" | 10" | 15 sec. | 24 hrs. | 250° to 380° | Thick Liquid | 5,000 | Beige | FDA Compliant 21 CFR 175.105 | Cardboard, Fabric | 10 | 0000000 |
Hot-Melt Glue Sticks

When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds. 3M glue sticks work only with 3M glue guns. The 8" long glue sticks require a converter (sold separately) to use with a 3M or LT gun.
Adhesives that take longer to harden are suited for applications that require some repositioning, because the longer open times allow for more adjustment. For high-volume applications, adhesives with a lower viscosity flow faster than other hot-melt adhesives.
LM denotes low-temperature formulations. These work well on delicate or heat-sensitive materials.
Mfr. Model No. | For 3M Gun Model No. | Dia. | Lg. | Begins to Harden | Reaches Full Strength | Application Temp. Range, °F | Consistency | Viscosity, cP | Color | For Joining | Approx. No. of Sticks per lb. | 1 lbs. | 11 lbs. | |
3M Scotch-Weld Glue | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3792 | EC | 5/8" | 8" | 50 sec. | 24 hrs. | 350° to 385° | Thick Liquid | 5,000 | Clear | Fabric, Wood | 15 | 0000000 | ||
3792LM | LT | 5/8" | 2" | 40 sec. | 24 hrs. | 250° to 270° | Thick Liquid | 10,500 | Clear | Fabric, Plastic, Rubber, Wood | 55 | 0000000 | ||
3792LM | LT, EC | 5/8" | 8" | 40 sec. | 24 hrs. | 250° to 270° | Thick Liquid | 10,500 | Clear | Fabric, Plastic, Rubber, Wood | 15 | 0000000 |
Converter for 3M or LT Guns | 0000000 | Each | 000000 |
Primers for Instant-Bond Adhesives


Improve instant-bond adhesive performance on hard-to-bond slippery plastics. These primers cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).
Primers in brush-top bottles also include a spray head for easy dispensing.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Drying Time, sec. | Consistency | Viscosity, cP | Color | Cannot Be Sold To | Each | |
Loctite® Primers | |||||||||
7701 | 1.75 | Brush-Top Bottle, Spray Bottle | 30 | Thin Liquid | 1 | Clear | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 0000000 | 000000 |
770 | 1.75 | Brush-Top Bottle, Spray Bottle | 30 | Thin Liquid | 1 | White | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 00000000 | 00000 |
770 | 16 | Can | 30 | Thin Liquid | 1 | White | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 00000000 | 00000 |
Adhesive Accelerators for Instant-Bond Adhesives

Shorten the time it takes instant-bond adhesives to reach full strength. Apply these accelerators before bonding with instant-bond adhesives for strength, or after bonding to keep adhesive from turning cloudy.
Bottles of Scotch-Weld 87937, 712, 7109, and 7113 include both a brush and spray head for easy dispensing.
Scotch-Weld 87937 also works as a primer on porous materials.
Container | |||||||
---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Consistency | Viscosity, cP | Color | Each | |
3M Scotch-Weld Accelerators | |||||||
87937 | 2 fl. oz. | Brush-Top Bottle, Spray Bottle | Thin Liquid | 10 | Amber | 00000000 | 000000 |
Surface Fillers for Canvas and Leather

Make flexible, waterproof repairs to rips and tears in canvas, leather, and acrylic fabric.