Canvas-Bonding Adhesives

	Container Type Container Type


Syringe	Can

Aerosol Can	Bottle

Pail	Brush-Top Can

Single-Use Packet	Tube

Brush-Top Bottle	Spray Bottle

Cartridge	Jug

Roll	Stick

	For Use On For Use On

	For Joining For Joining

	Color Color

	Clear		White
	Beige		Yellow
	Blue		Red
	Black		Orange
	Purple		Amber
	Brown		Gray

	Container Size Container Size

	Type Type

	Manufacturer Manufacturer

	Manufacturer Model Number Manufacturer Model Number

27
35
74
74CA
77
77CA
90
94ET
401
406
438
454
770
1099
3747
3792
3792LM
4471
4475
4501
4851
4861
7701
14200
14250
14270
14310
50132
50139
50172
87937
1000NF
SF20
SF100
SI Gel

	Consistency Consistency

	Adhesive Type Adhesive Type

	Formulation Formulation

EVA (Ethylene Vinyl
Acetate)

Fish Extract

Latex

PVA (Polyvinyl Acetate)

Viton® Fluoroelastomer

	Begins to Harden Begins to Harden

	Maximum Temperature Maximum Temperature

	Minimum Temperature Minimum Temperature

	Reaches Full Strength Reaches Full Strength

	Clarity Clarity

Clear

Semi-Clear

Opaque

	Mixing Required Mixing Required

Yes

	Viscosity Viscosity

	Shear Strength Shear Strength

Less than 500 lbs./sq. in.

500 to 999 lbs./sq. in.

1,000 to 1,999 lbs./sq. in.

2,000 to 2,999 lbs./sq. in.

3,000 lbs./sq. in. or greater

Not Rated

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Elongation Elongation

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

View catalog pages (18)

Forward

How can we improve?

90 Products

About Structural Adhesives

About Finishing

About Paint and Protective Coatings

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

	Container
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Consistency	Viscosity, cP	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		Each
3M Adhesives
1099	32 oz.	Can	40 min.	72 hrs.	3,405	Thick Liquid	3,000	-10° to 230°	Beige	Fabric, Foam, Plastic, Rubber	__	00000000	000000
1099	1 gal.	Can	40 min.	72 hrs.	3,405	Thick Liquid	3,000	-10° to 230°	Beige	Fabric, Foam, Plastic, Rubber	__	00000000	000000
4475	32 oz.	Can	10 min.	72 hrs.	Not Rated	Thick Liquid	8,500	-10° to 230°	Clear	Ceramic, Fabric, Glass, Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, CT, DC, DE, MA, MD, ME, NJ, NY, PA, RI, UT, Northern VA, VT	00000000	000000
Pliobond Adhesives
35	8 oz.	Brush-Top Can	3 min.	14 days	1,200	Thick Liquid	6,500	-40° to 370°	Beige	Cardboard, Fabric, Foam, Wood	__	0000000	00000
35	16 oz.	Can	3 min.	14 days	1,200	Thick Liquid	6,500	-40° to 370°	Beige	Cardboard, Fabric, Foam, Wood	__	0000000	00000
35	32 oz.	Can	3 min.	14 days	1,200	Thick Liquid	6,500	-40° to 370°	Beige	Cardboard, Fabric, Foam, Wood	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	0000000	00000
35	1 gal.	Can	3 min.	14 days	1,200	Thick Liquid	6,500	-40° to 370°	Beige	Cardboard, Fabric, Foam, Wood	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	0000000	000000
Adhesives
__	4 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	__	000000	00000
__	8 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	__	000000	00000
__	16 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	__	000000	00000
__	32 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	00000
__	1 gal.	Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	000000

Quick-Set Contact Adhesives

Bonds reach full strength in 10 minutes. Apply this adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.

	Container
Mfr. Model No.	Size, gal.	Type	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Consistency	Viscosity, cP	Temp. Range, °F	For Joining	Color		Each
3M Adhesives
1000NF	1	Jug	60 sec.	10 min.	400	Thin Liquid	750	60° to 80°	Fabric, Foam, Wood	Purple	00000000	0000000

Waterproof Epoxy Structural Adhesives

Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining		Each
MarineWeld	50172	0.85	Syringe	5 min.	1 hrs.	1,800	Not Rated	1:1	Paste (100,000 cP)	-20° to 300°	White	Salt Spray, Submersible	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	000000	00000

Quick-Set Epoxy Structural Adhesives

For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

50132 works especially well on plastics and composites.

Devcon Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
5 Minute Epoxy	14200	15	Bottle	5 min.	12 hrs.	1,900	2	1:1	Thick Liquid (10,000 cP)	-40° to 200°	Amber	Metal, Plastic, Masonry, Wood	000000	000000
5 Minute Epoxy	14250	0.84	Syringe	5 min.	12 hrs.	1,900	2	1:1	Thick Liquid (10,000 cP)	-40° to 200°	Amber	Metal, Plastic, Masonry, Wood	0000000	00000
5 Minute Epoxy	14270	1.69	Cartridge	5 min.	12 hrs.	1,900	2	1:1	Thick Liquid (10,000 cP)	-40° to 200°	Amber	Metal, Plastic, Masonry, Wood	00000000	00000

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
PlasticWeld	50132	0.85	Syringe	5 min.	60 min.	2,000	Not Rated	1:1	Thick Liquid (9,000 cP)	-20° to 300°	Yellow	Metal, Plastic, Rubber, Composites, Masonry, Wood	000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69-oz. Devcon Cartridges	00000000	00000
Dispensing Gun for 1.69-oz. Cartridges	00000000	00000

Epoxy Structural Adhesives

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts.

DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.

Devcon Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
2 Ton Epoxy	14310	0.84	Syringe	8 min.	16 hrs.	2,250	2	1:1	Thick Liquid (8,000 cP)	-40° to 200°	Clear	Metal, Metal to Plastic, Metal to Composites, Plastic, Plastic to Composites, Composites	0000000	000000

Urethane Structural Adhesives

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Plastic Bonder	50139	0.85	Syringe	15 min.	30 min.	1,000	Not Rated	1:1	Thick Liquid (50,000 cP)	-20° to 250°	Black	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood	000000	00000

Instant-Bond Adhesive Gel for Hard-to-Bond Materials

Quickly adhere hard-to bond surfaces with these adhesives, also known as super glue. These thick gels fill gaps between parts and won't drip on vertical surfaces. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

Dispense adhesives in syringes with a plunger (sold separately).

Dispense adhesives in cartridges with a standard caulk gun.

SI Gel bonds dirty and oily surfaces.

454 and 4541 are suitable for porous and dissimilar materials.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
3M Scotch-Weld Adhesives
SI Gel	0.7	Tube	0.02"	20 sec.	24 hrs.	Gel (125,000 cP)	-65° to 180°	Clear	Fabric, Plastic, Rubber, Wood	00000000	000000
Loctite® Adhesives
454	0.1	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	0000
454	0.3	Syringe	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	0.7	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	1	Syringe	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	7	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000
454	10.5	Cartridge	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000

Flexible Instant-Bond Adhesives

Accommodate joint movement with these adhesives that remain pliable when cured. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Elongation	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
4851	0.7	Bottle	0.006"	20 sec.	24 hrs.	Thin Liquid (380 cP)	85%	-65° to 120°	Clear	Composites, Fabric, Metal, Plastic, Rubber	00000000	000000
4861	0.7	Bottle	0.008"	20 sec.	24 hrs.	Thick Liquid (4,250 cP)	85%	-65° to 120°	Clear	Composites, Fabric, Metal, Plastic, Rubber	00000000	00000

Skin-Guard Instant-Bond Adhesives

Make strong, instant bonds on a variety of materials—but not your skin. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

Container
Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
0.07	Tube	0.006"	10 sec.	24 hrs.	Thin Liquid (40 cP)	-65° to 160°	Clear	Ceramic, Fabric, Metal, Plastic, Rubber, Wood	00000000	00000

Instant-Bond Adhesives

Also known as super glue, these adhesives bond quickly. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
401	0.1	Tube	0.005"	15 sec.	24 hrs.	Thin Liquid (110 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
401	0.7	Bottle	0.005"	15 sec.	24 hrs.	Thin Liquid (110 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
401	16	Bottle	0.005"	15 sec.	24 hrs.	Thin Liquid (110 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000
4471	0.7	Bottle	0.008"	15 sec.	24 hrs.	Thin Liquid (630 cP)	-65° to 180°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
4471	16	Bottle	0.008"	15 sec.	24 hrs.	Thin Liquid (630 cP)	-65° to 180°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000

Toughened Instant-Bond Adhesives

Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

435 and 438 work on porous materials such as wood, paper, and fabric.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
438	0.7	Bottle	0.006"	30 sec.	24 hrs.	Thin Liquid (180 cP)	-65° to 220°	Black	Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood	00000000	000000

Quick-Set Instant-Bond Adhesives

Form bonds in 5 seconds or less with these adhesives, also known as super glue. Use an accelerator (sold separately) to shorten the time it takes to reach full strength.

SF100 bonds dirty or oily surfaces.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	Specifications Met	For Joining		Each
3M Scotch-Weld Adhesives
SF100	0.1	Tube	0.006"	4 sec.	24 hrs.	Thin Liquid (80 cP)	-65° to 180°	Clear	Commercial Standard A-A-3097	Fabric, Plastic, Rubber, Wood	00000000	00000
SF100	0.7	Bottle	0.006"	4 sec.	24 hrs.	Thin Liquid (80 cP)	-65° to 180°	Clear	Commercial Standard A-A-3097	Fabric, Plastic, Rubber, Wood	00000000	00000

Wicking Instant-Bond Adhesives

These thin liquids, also known as super glue, flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
406	0.1	Tube	0.004"	15 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
406	0.7	Bottle	0.004"	15 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
406	16	Bottle	0.004"	15 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000

Quick-Set Wicking Instant-Bond Adhesives

For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives. Also known as super glue, they have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	Specifications Met	For Joining		Each
3M Scotch-Weld Adhesives
SF20	0.7	Bottle	0.004"	4 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 180°	Clear	Commercial Standard A-A-3097	Fabric, Plastic, Rubber, Wood	00000000	000000
Loctite® Adhesives
4501	0.7	Bottle	0.004"	5 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 180°	Clear	__	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000

High-Temperature Glue

This high-temperature glue sticks quickly, but can be repositioned for up to 2 hours before it begins to harden. Glue can be applied and allowed to dry, then reactivated with water when ready for bonding. It cannot be sold to Canada due to import regulations.

Container
Size	Type	Begins to Harden	Reaches Full Strength	Consistency	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		Each
4 oz.	Bottle	2 hrs.	12 hrs.	Thick Liquid	-30° to 500°	Beige	Cardboard, Fabric, Glass, Metal, Wood	Canada	0000000	000000
32 oz.	Bottle	2 hrs.	12 hrs.	Thick Liquid	-30° to 500°	Beige	Cardboard, Fabric, Glass, Metal, Wood	Canada	000000	00000
1 gal.	Pail	2 hrs.	12 hrs.	Thick Liquid	-30° to 500°	Beige	Cardboard, Fabric, Glass, Metal, Wood	Canada	000000	00000
5 gal.	Pail	2 hrs.	12 hrs.	Thick Liquid	-30° to 500°	Beige	Cardboard, Fabric, Glass, Metal, Wood	Canada	000000	000000

Putty-to-Rubber Moldable Glue

This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.

Container
Size, oz.	Type	Begins to Harden	Reaches Full Strength	Elongation	Temp. Range, °F	Color	For Joining	Pkg. Qty.		Pkg.
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	Black	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	000000
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	Blue, Red, Yellow	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	00000
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	Gray	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	00000
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	White	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	00000

Glue Shapes

These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.

Discs

Dia.	Thick.	Consistency	Temp. Range, °F	Color	For Joining	Pkg. Qty.		Pkg.
1/2"	0.014"	Gel	20° to 140°	Clear	Ceramic, Fabric, Wood	80	0000000	00000
1/2"	0.014"	Gel	20° to 140°	Clear	Ceramic, Fabric, Wood	1,000	0000000	00000

Glue

Use these glues for general purpose bonding and repairs.

3M glue cannot be sold to California due to local regulatory limits on VOCs (volatile organic compounds).

Glue Sticks

						Each		Package
Container Size, oz.	Begins to Harden	Reaches Full Strength	Max. Temp., °F	Color	For Joining		Each	Pkg. Qty.		Pkg.
0.77	10 sec.	12 hrs.	150°	Clear	Cardboard, Fabric	00000000	00000	6	00000000	000000

3M Glue in Aerosol Cans

								Each		Package
Mfr. Model No.	Container Size, oz.	Begins to Harden	Reaches Full Strength	Max. Temp., °F	Color	For Joining	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
27	13	15 sec.	24 hrs.	140°	Clear	Fabric, Metal, Plastic, Rubber, Wood	CA	00000000	000000	12	00000000	0000000

Temporary Glue for Sanding Discs

Bond sanding discs with a paper, cloth, or fiber backing to backup pads. This glue removes cleanly, so it's easy to change to another disc. It cannot be sold to the regions listed because it exceeds local regulatory limits on VOCs (volatile organic compounds).

Container
Size, oz.	Type	Begins to Harden	Reaches Full Strength	Consistency	Max. Temp., °F	Color	For Disc Abrasive Backing Material	Cannot Be Sold To		Each
5	Tube	5 min.	15 min.	Thick Liquid	140°	White	Cloth, Paper, Fiber	CA, Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	000000

Spray Adhesives

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

												Each
Mfr. Model No.	Container Size, oz.	Approximate Coverage	Inverted Dispensing	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M Adhesives
74	16.9	26 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Clear	Fabric, Foam	CA	0000000	000000	000000
74	16.9	26 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Orange	Fabric, Foam	CA	0000000	00000	00000
74	16.9	26 sq. ft. @ 2.5 gm/ft²	Yes	30 sec.	24 hrs.	200	0° to 200°	Orange	Fabric, Foam	CA	00000000	00000	00000
74CA	19	29 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Clear	Fabric, Foam	__	0000000	00000	00000
74CA	19	29 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Orange	Fabric, Foam	__	0000000	00000	00000
77	13.44	21 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	Clear	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	CA	0000000	00000	00000
77	16.8	26 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	White	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	CA	0000000	00000	00000
77CA	18	28 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	Clear	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	__	0000000	00000	00000
94ET	19.8	31 sq. ft. @ 2.5 gm/ft²	No	10 min.	24 hrs.	300	0° to 210°	Clear	Ceramic, Composites, Glass, Metal, Plastic	__	0000000	00000	00000

Temporary Positioning Spray Adhesives

Spray a coating of this glue onto one surface to temporarily hold small parts. It forms a strong bond, but will not harden completely until 24 hours later.

Gorilla Adhesives
Container Size, oz.	Begins to Harden	Reaches Full Strength	Shear Strength	Max. Temp., °F	Color	For Joining		Each
14	5 min.	24 hrs.	Not Rated	90°	Clear	Fabric, Metal	0000000	000000

Spray Adhesives for Viton® Fluoroelastomer Rubber

Splice rubber O-rings and other gaskets with this chemical resistant adhesive. It cannot be sold to Canada due to chemical regulations.

Container Size, oz.	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		Each
12	19 sq. ft. @ 2.5 gm/ft²	5 sec.	48 hrs.	150	-40° to 400°	Black	Ceramic, Fabric, Metal, Rubber, Wood	Canada	000000	000000

High-Strength Spray Adhesives

Form bonds with twice the strength of our other spray adhesives. Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to adhere.

Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

							Temp. Range, °F						Each
Mfr. Model No.	Container Size, oz.	Approximate Coverage	Inverted Dispensing	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Min.	Max.	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M Adhesives
90	12.23	19 sq. ft. @ 2.5 gm/ft²	No	60 sec.	24 hrs.	600	0°	250°	Clear	Ceramic, Composites, Glass, Metal, Plastic, Rubber	CA	0000000	000000	000000

Cement for Abrasive Grains

Coat cotton, canvas, and felt buffing wheels with this cement, then apply abrasive grains.

Container
Size, gal.	Type	Begins to Harden	Reaches Full Strength	Consistency	Viscosity	Temp. Range	Color	For Joining		Each
1	Pail	30 min.	24 hrs.	Thin Liquid	Not Rated	Not Rated	Brown	Fabric	000000	000000

Hot-Melt Glue Sticks

When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds. 3M glue sticks work only with 3M glue guns. The 8" long glue sticks require a converter (sold separately) to use with a 3M TC or LT gun.

Adhesives that take longer to harden are suited for applications that require some repositioning, because the longer open times allow for more adjustment. For high-volume applications, adhesives with a lower viscosity flow faster than other hot-melt adhesives.

LM denotes low-temperature formulations. These work well on delicate or heat-sensitive materials.

3M Scotch-Weld Glue
Mfr. Model No.	For 3M Gun Model No.	Dia.	Lg.	Begins to Harden	Reaches Full Strength	Application Temp. Range, °F	Consistency	Viscosity, cP	Color	For Joining	Approx. No. of Sticks per lb.		1 lbs.	11 lbs.
3747	TC	5/8"	2"	45 sec.	24 hrs.	350° to 385°	Thick Liquid	4,100	Beige	Fabric, Metal, Plastic, Rubber, Wood	55	0000000	000000	0000000
3792	TC	5/8"	2"	50 sec.	24 hrs.	350° to 385°	Thick Liquid	5,000	Clear	Fabric, Wood	55	0000000	00000	000000
3792	TC, EC	5/8"	8"	50 sec.	24 hrs.	350° to 385°	Thick Liquid	5,000	Clear	Fabric, Wood	15	0000000	00000	000000
3792LM	LT	5/8"	2"	40 sec.	24 hrs.	250° to 270°	Thick Liquid	10,500	Clear	Fabric, Plastic, Rubber, Wood	55	0000000	00000	000000
3792LM	LT, EC	5/8"	8"	40 sec.	24 hrs.	250° to 270°	Thick Liquid	10,500	Clear	Fabric, Plastic, Rubber, Wood	15	0000000	00000	000000

Converter for 3M TC or LT Guns

0000000

Each

000000

Fast-Hardening Hot-Melt Glue Sticks

Glue hardens in 15 seconds or less to bond quickly. Made of FDA listed materials, it is suitable for food packaging.

Dia.	Lg.	Begins to Harden	Reaches Full Strength	Application Temp. Range, °F	Consistency	Viscosity, cP	Color	Specifications Met	For Joining	Approx. No. of Sticks per lb.		1 lbs.	5 lbs.	25 lbs.
7/16"	4"	15 sec.	24 hrs.	250° to 380°	Thick Liquid	5,000	Beige	FDA Compliant 21 CFR 175.105	Cardboard, Fabric	45	0000000	000000	000000	0000000
7/16"	15"	5 sec.	24 hrs.	250° to 300°	Thin Liquid	1,160	Beige	FDA Compliant 21 CFR 175.105	Cardboard, Fabric	10	0000000	00000	00000	000000
7/16"	15"	15 sec.	24 hrs.	250° to 380°	Thick Liquid	5,000	Beige	FDA Compliant 21 CFR 175.105	Cardboard, Fabric	10	0000000	00000	00000	000000
5/8"	10"	15 sec.	24 hrs.	250° to 380°	Thick Liquid	5,000	Beige	FDA Compliant 21 CFR 175.105	Cardboard, Fabric	10	0000000	00	00000	000000

Flexible Hot-Melt Glue Sticks

This glue remains flexible after curing to accommodate joint movement. Glue that is FDA compliant 21 CFR 175.105 is suitable for food packaging.

Glue
Dia.	Lg.	Begins to Harden	Reaches Full Strength	Application Temp. Range, °F	Consistency	Viscosity, cP	Elongation	Color	Specifications Met	For Joining	Approx. No. of Sticks per lb.		1 lbs.	5 lbs.	25 lbs.
7/16"	10"	60 sec.	24 hrs.	350° to 390°	Thick Liquid	5,375	1,300%	Clear	FDA Compliant 21 CFR 175.105	Ceramic, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	18	0000000	000000	000000	0000000

Primers for Instant-Bond Adhesives

Improve instant-bond adhesive performance on hard-to-bond slippery plastics. These primers cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Primers in brush-top bottles also include a spray head for easy dispensing.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.

	Container
Mfr. Model No.	Size, fl. oz.	Type	Drying Time, sec.	Consistency	Viscosity, cP	Color	Cannot Be Sold To		Each
Loctite® Primers
7701	1.75	Brush-Top Bottle, Spray Bottle	30	Thin Liquid	1	Clear	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	0000000	000000
770	1.75	Brush-Top Bottle, Spray Bottle	30	Thin Liquid	1	White	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	00000000	00000
770	16	Can	30	Thin Liquid	1	White	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	00000000	00000

Adhesive Accelerators for Instant-Bond Adhesives

Shorten the time it takes instant-bond adhesives to reach full strength. Apply these accelerators before bonding with instant-bond adhesives for strength, or after bonding to keep adhesive from turning cloudy.

Bottles of Scotch-Weld 87937, 712, 7109, and 7113 include both a brush and spray head for easy dispensing.

Scotch-Weld 87937 also works as a primer on porous materials.

	Container
Mfr. Model No.	Size	Type	Consistency	Viscosity, cP	Color		Each
3M Scotch-Weld Accelerators
87937	2 fl. oz.	Brush-Top Bottle, Spray Bottle	Thin Liquid	10	Amber	00000000	000000

Surface Fillers for Canvas and Leather

Make flexible, waterproof repairs to rips and tears in canvas, leather, and acrylic fabric.

Container
Size, oz.	Type	Consistency	Begins to Harden, min.	Reaches Full Strength, min.	Temp. Range, °F	Color	For Use Outdoors	For Use On		Each
6	Bottle	Thin Liquid	3	30	35° to 210°	Beige	Yes	Leather, Canvas, Acrylic Fabric	0000000	000000
16	Bottle	Thin Liquid	3	30	35° to 210°	Beige	Yes	Leather, Canvas, Acrylic Fabric	0000000	00000