Wing Nut Expansion Plugs
Twist the wing nut on these plugs to expand the seal and close off pipe openings. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
For Pipe | Max. Back Pressure | |||||||
|---|---|---|---|---|---|---|---|---|
| Size | ID | Air, psi | Water, ft. of head | O'all Ht. | Temp. Range, °F | Seal Material | Each | |
Style A | ||||||||
Stainless Steel Plate | ||||||||
| 7/8 | 0.82"-0.92" | 10 | 24 | 1 11/16" | 0° to 175° | Neoprene Rubber | 0000000 | 000000 |
Hex-Nut Expansion Plugs
Tighten the nut on these plugs to expand the seal and close off pipe openings. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
For Pipe | Max. Back Pressure | |||||||
|---|---|---|---|---|---|---|---|---|
Size | ID | Air, psi | Water, ft. of head | O'all Ht. | Temp. Range, °F | Seal Material | Each | |
Style B | ||||||||
Stainless Steel Plate | ||||||||
| 7/8 | 0.82"-0.92" | 10 | 24 | 1 11/16" | -40° to 250° | Neoprene Rubber | 0000000 | 000000 |
Quick-Snap Expansion Plugs
Turn the cam handle to expand the seal, then snap the handle down to hold it in place and close off pipe openings. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
For technical drawings and 3-D models, click on a part number.
Expansion Plugs with Bypass
Use the bypass tube on these plugs to add air, water, and other fluid to your pipeline or to relieve pressure while testing. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
Style G and Style J plugs have a Schrader valve, which has an internal spring that holds the valve shut until you depress the pin, providing control over air flow.
For technical drawings and 3-D models, click on a part number.
For Pipe | Max. Back Pressure | Material | Bypass | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | ID | Air, psi | Water, ft. of head | O'all Ht. | Temp. Range, °F | Seal | Bypass Cap | Thread Type | Thread Size | For Tube ID | Tube Connection Type | Each | |
Style E | |||||||||||||
Stainless Steel Stem | |||||||||||||
| 7/8 | 0.81"-0.89" | 10 | 24 | 3 1/2" | -40° to 250° | Neoprene Rubber | __ | __ | __ | 1/4" | Barbed | 0000000 | 0000000 |
Style J | |||||||||||||
Steel Stem | |||||||||||||
| 7/8 | 0.81"-0.89" | 10 | 23 | 3 5/8" | -40° to 210° | Neoprene Rubber | Plastic | Schrader Valve | 0.305"-32 | __ | __ | 00000000 | 000000 |