Twist stripped wires together, insert them into the connector, and then crimp for a dependable connection.

Make a quick, secure wire connection without crimping.

Suitable for use in tight spaces, these connectors have a narrow profile that takes up less space than standard wire splicing connectors.

Made of porcelain, these connectors can withstand temperatures up to 1200°F.

Large enough to be used with a wide range of wire sizes, these connectors can still fit into cramped outlet boxes.

Suitable for use underground, these connectors consist of a twist-on wire connector and an abrasion- and moisture-resistant insulator tube.

Push stripped wires into connectors for a reliable connection that's faster to install than twisting or crimping.

A plastic cover fully insulates these splices.

Visually confirm your connection through the inspection window in the insulation of these splices.

Visually confirm your connection through the inspection window.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

When heat is applied, adhesive-lined insulation shrinks and bonds to wires, creating a moisture- and corrosion-resistant seal.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a watertight seal.

A plastic cover fully insulates these splices.

Make watertight connections for underground applications.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Push stripped wire into each end of these splices to make a connection.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

For use with a compression tool, these splices are color-coded to match compression dies.

Pierce the insulation of wire without stripping it to make quick connections that are also sealed to keep out water.

Tap and splice multiple wires in temporarily wet environments and up to six feet underground.

Connect one wire to two wires of the same size. When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.

Tap a main wire or add a finished terminal to the end of a wire.

Taps connect to wires with male quick-disconnect terminals.