18-8 stainless steel studs have good chemical resistance.

Often used in cell phones and laptops, these pins attach thin panels such as printed circuit boards to metal and plastic bases. Also known as PEM® TA and T4 TackPins.

Use an arbor press or similar pressure tool to install these spring plungers into a panel.

Insert the nose into a panel; then thread on the nut and tighten using an installation wrench.

An expanding rubber bushing damps vibration while holding panels together.

These rounded head screws have a nut that clips onto the edge of a thin panel, allowing you to mount the screw near edges. A quarter-turn locks and releases access panels, doors, and covers.

Rivet these wing head nuts into thin panels for a flush fit. They can be mounted without space between panels. A quarter-turn locks and releases access panels, doors, and covers.

Press these wing head nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. A quarter-turn locks and releases access panels, doors, and covers.

These rounded head nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers.

Install in a cutout to create a secure joint between boards, butcher blocks, and countertops.