Fill these cartridges with the two-part adhesive of your choice.

Fill these cartridges with one-part adhesive.

For invisible bond lines, these adhesives dry clear.

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

With excellent shear strength, these acrylics form bonds at least 25% stronger than standard acrylic structural adhesives.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

Bond glass and stone to drywall, treated lumber, and subfloors.

Install foam insulation, drywall, and paneling with these adhesives.

These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.

These adhesives maintain their strength at temperatures up to 250° F.

When concrete is saturated or submerged in water, use these adhesives to form strong bonds.

Wash away your heaviest grease and grime including tar, oil, asphalt, and adhesives without harsh solvents.

Remove tough or sticky soils without drying out your hands.

Fight the spread of germs with this antibacterial soap.

NSF registered E2 and specially designed for use in food-processing environments, this soap eliminates the need for a chlorine dip and is effective against food-borne illness-causing organisms.

Scrubbing grit plus a heavy duty cleanser makes this soap effective against tough soils such as grease, oil, ink, and carbon black.

Formulated with nonabrasive scrubbing particles, this soap removes light to medium soils and dirt.

Pair this cartridge with the Kimberly-Clark dispenser (sold separately) for convenient, no-mess dispensing.

Place your hands beneath these sensor-activated dispensers to release a single squirt of soap.

Place these stations throughout your facility and outside entrances for convenient hand sanitizing.

Distribute hand sanitizer with these refillable dispensers. Instead of using a button, they dispense a drop of sanitizer when the battery-powered sensor detects motion, limiting the spread of germs between users.

Replace the cartridge on your respirator when breathing becomes difficult.

Replace the filter on your respirator when breathing becomes difficult.

Replace the cartridge and/or filter when breathing through these half-face respirators becomes difficult.

Designed to fit easily under welding helmets. Replace the filter when breathing through these respirators becomes difficult.

Individually wrapped wipes remove dirt and sweat from respirators. The alcohol-free solution won't damage your device.

Disinfect and store full- and half-face respirators using these kits.

The portable pump on these respirators provides a continuous supply of clean air for one person.

Good for use around abrasive blasters and painters, these respirators are made of high-density materials that protect against rough airborne particles.

Cartridges are also known as stems.

When you no longer see the blue indicator on your Sloan urinal cartridge, it’s time to replace it.

Withstands temperatures up to 175° F.

Constructed of stainless steel mesh, these cartridges can be cleaned for repeated use.

Use these cartridges in a filter housing to treat water quality and reduce odor and chlorine in your line.

Prevent fluctuating pH levels from damaging pipelines and equipment. These cartridges are made of calcium carbonate and magnesium oxide to neutralize pH levels.

Use for temperatures up to 140° F.

Ensure plating materials are free from contaminants with these polypropylene cartridges.

With excellent corrosion and chemical resistance, these cartridges can stand up to caustic soda, coolant, and harsh detergent.

Use these cartridges in a diesel fuel generator to filter contaminants.

Withstands temperatures up to 250° F.

Withstands temperatures up to 275° F.

Also known as absolute-rated cartridges, these remove 99.9% of particles.

There's no need to stop your water supply and disassemble these filters for cleaning. Turn the handle to flush debris from the cartridge and purge dirty water through the drain at the bottom.

Prepare water for use in beverages, food preparation, and ice production with these filters. They remove particles that cause unpleasant tastes and odors.

Tap into great-tasting water by screwing this filter directly onto your faucet.

Remove contaminants, moisture, and other particles from steam that will touch food and for final filtering in pharmaceutical, biotech, and electronics applications.

These filter housings are made of durable zinc and clear plastic, so you can monitor collecting debris without stopping flow.

Use in applications up to 300 psi.

Capture oil, oil vapor, and other contaminants from your pump to prevent them from spreading into your high-vacuum system.

Use these cartridges with a deionizer to remove ions from your water supply. They are designed for high-purity electronics and manufacturing applications.

Designed for use in low-flow applications without back pressure, these deionizers have barbs on each end for connecting to tubing.