About Casters and Wheels
More
Flange-Mount Ball Transfers
Steel balls are durable. Chrome-plated steel balls are durable and resist wear and corrosion. Stainless steel balls offer the most corrosion resistance. They don’t need to be lubricated. Acetal balls are abrasion resistant. Nylon balls are nonmarking.
Ball transfers with an angled working orientation can be used to form support stands.
Capacity is given for the ball up orientation. Using these ball transfers in a ball down or angled orientation could reduce the capacity stated.
For technical drawings and 3-D models, click on a part number.
Flange | Mounting Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Housing Color | Lg. | Wd. | Dia. | No.of Mounting Holes | Dia. | Ctr.-to-Ctr. | Temperature Range, °F | Each | ||
Steel Ball | |||||||||||||||
Zinc-Plated Steel Housing | |||||||||||||||
| A | 1" | 75 | 1 3/16" | 1 11/16" | Ball Up, Ball Down | __ | 2 3/4" | 2" | __ | 2 | 7/32" | 2 3/16" | __ | 000000 | 00000 |
| A | 1" | 150 | 1 3/16" | 1 1/8" | Ball Up, Ball Down | __ | 2 3/4" | 2" | __ | 2 | 7/32" | 2 3/16" | __ | 0000000 | 0000 |
| B | 1" | 120 | 1 3/16" | 1 3/4" | Ball Up, Ball Down | __ | 2 11/16" | 2" | __ | 2 | 3/16" | 2 3/8" | __ | 00000000 | 00000 |
| B | 1 1/2" | 250 | 1 13/16" | 2 5/8" | Ball Up | __ | 3" | 3" | __ | 4 | 9/32" | 2 15/32" | __ | 000000 | 00000 |
| C | 1" | 110 | 1 13/32" | 1 3/16" | Ball Up | __ | 2 17/32" | 1 23/32" | __ | 2 | 7/32" | 1 7/8" | __ | 00000000 | 00000 |
Black-Oxide Steel Housing | |||||||||||||||
| D | 11/16" | 90 | 1" | 1" | Ball Up, Ball Down, Angle | __ | 2 7/16" | 1 11/16" | __ | 2 | 5/32" | 2" | __ | 0000000 | 00000 |
| D | 1" | 135 | 1 9/32" | 1 1/4" | Ball Up, Ball Down, Angle | __ | 2 7/16" | 1 11/16" | __ | 2 | 5/32" | 2" | __ | 0000000 | 00000 |
| E | 1" | 135 | 1 1/2" | 1 1/4" | Ball Up, Ball Down, Angle | __ | __ | __ | 2 7/16" | 4 | 5/32" | 2 3/16" | __ | 0000000 | 00000 |
| E | 1 1/8" | 180 | 1 19/32" | 1 5/16" | Ball Up, Ball Down, Angle | __ | __ | __ | 2 7/16" | 4 | 5/32" | 2 3/16" | __ | 0000000 | 00000 |
| E | 1 1/4" | 225 | 1 3/4" | 1 15/32" | Ball Up, Ball Down, Angle | __ | __ | __ | 2 7/16" | 4 | 5/32" | 2 3/16" | __ | 0000000 | 00000 |
Nylon Plastic Housing | |||||||||||||||
| F | 1" | 110 | 1 3/8" | 1 23/32" | Ball Up | Black | 2 29/32" | 2 1/16" | __ | 2 | 9/32" | 2 3/8" | 32° to 195° | 0000000 | 00000 |
Chrome-Plated Steel Ball | |||||||||||||||
Zinc-Plated Steel Housing | |||||||||||||||
| F | 1" | 65 | 1 3/16" | 1 21/32" | __ | __ | 2 3/4" | 2" | __ | 2 | 7/32" | 2 3/16" | __ | 00000000 | 00000 |
Acetal Plastic Ball | |||||||||||||||
Nylon Plastic Housing | |||||||||||||||
| G | 1" | 20 | 1 5/16" | 1 5/16" | Ball Up | White | 2 1/2" | 1 3/4" | __ | 2 | 7/32" | 1 3/4" | 32° to 195° | 0000000 | 00000 |
Nylon Plastic Ball | |||||||||||||||
Zinc-Plated Steel Housing | |||||||||||||||
| A | 1" | 75 | 1 3/16" | 1 5/8" | Ball Up, Ball Down | __ | 2 3/4" | 2" | __ | 2 | 7/32" | 2 3/16" | 32° to 195° | 0000000 | 00000 |
| B | 1 1/2" | 250 | 1 13/16" | 2 19/32" | Ball Up, Ball Down, Angle | __ | 3" | 3" | __ | 4 | 9/32" | 2 7/16" | 32° to 195° | 0000000 | 00000 |
Stainless Steel Housing  | |||||||||||||||
| A | 1" | 75 | 1 3/16" | 1 11/16" | Ball Up, Ball Down, Angle | __ | 2 3/4" | 2" | __ | 2 | 7/32" | 2 3/16" | 32° to 195° | 0000000 | 00000 |
Stainless Steel Ball | |||||||||||||||
Zinc-Plated Steel Housing | |||||||||||||||
| A | 1" | 75 | 1 3/16" | 1 5/8" | Ball Up, Ball Down | __ | 2 3/4" | 2" | __ | 2 | 7/32" | 2 3/16" | __ | 0000000 | 00000 |
| B | 1" | 75 | 1 3/16" | 1 11/16" | Ball Up, Ball Down, Angle | __ | 2 3/4" | 2" | __ | 2 | 7/32" | 2 3/16" | __ | 00000000 | 00000 |
| B | 1 1/2" | 250 | 1 13/16" | 2 19/32" | Ball Up, Ball Down, Angle | __ | 3" | 3" | __ | 4 | 9/32" | 2 7/16" | __ | 0000000 | 00000 |
Nylon Plastic Housing | |||||||||||||||
| F | 1" | 110 | 1 3/8" | 1 23/32" | Ball Up | Gray | 2 29/32" | 2 1/16" | __ | 2 | 9/32" | 2 3/8" | 32° to 104° | 0000000 | 00000 |
Stainless Steel Housing | |||||||||||||||
| A | 1" | 125 | 1 3/16" | 1 5/8" | Ball Up, Ball Down | __ | 2 3/4" | 2" | __ | 2 | 7/32" | 2 3/16" | __ | 0000000 | 00000 |
| B | 1" | 75 | 1 3/16" | 1 11/16" | Ball Up, Ball Down, Angle | __ | 2 3/4" | 2" | __ | 2 | 7/32" | 2 3/16" | __ | 00000000 | 00000 |
| B | 1 1/2" | 250 | 1 13/16" | 2 19/32" | Ball Up, Ball Down, Angle | __ | 3" | 3" | __ | 4 | 9/32" | 2 7/16" | __ | 0000000 | 00000 |
Heavy Duty Flange-Mount Ball Transfers
A steel ball in these ball transfers makes them durable. Orient them at an angle to form support stands.
Capacity is given for the ball up orientation. Using these ball transfers in a ball down or angled orientation could reduce the capacity stated.
For technical drawings and 3-D models, click on a part number.
Flange | Mounting Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Lg. | Wd. | No.of Mounting Holes | Dia. | Ctr.-to-Ctr. | Each | ||
Steel Ball | ||||||||||||
Black-Oxide Steel Housing | ||||||||||||
| A | 1/2" | 100 | 7/8" | 1" | Ball Up, Ball Down, Angle | 1 7/8" | 1 1/4" | 2 | 5/32" | 1 3/8" | 0000000 | 000000 |
| B | 1" | 500 | 1 5/8" | 1 3/4" | Ball Up, Ball Down, Angle | 2 1/4" | 2 1/4" | 4 | 7/32" | 1 3/4" | 0000000 | 000000 |
| B | 1" | 705 | 1 25/32" | 2" | Ball Up, Ball Down, Angle | 3" | 3" | 4 | 9/32" | 2 9/32" | 0000000 | 000000 |
| B | 1" | 830 | 1 3/4" | 2" | Ball Up, Ball Down, Angle | 3" | 3" | 4 | 5/16" | 2 9/32" | 0000000 | 000000 |
| B | 1 1/2" | 2,200 | 2 15/32" | 2 3/8" | Ball Up, Ball Down, Angle | 3" | 3" | 4 | 9/32" | 2 9/32" | 0000000 | 000000 |
| B | 1 1/2" | 2,400 | 2 3/8" | 2 3/8" | Ball Up, Ball Down, Angle | 3" | 3" | 4 | 5/16" | 2 9/32" | 0000000 | 000000 |
Shock-Absorbing Flange-Mount Ball Transfers
A thick rubber mounting cushion underneath these ball transfers absorbs impact and reduces vibration.
Steel balls are durable. Stainless steel balls offer the most corrosion resistance. They also don’t need to be lubricated. Nylon balls are nonmarking.
Ball transfers with an angled working orientation can be used to form support stands.
Capacity is given for the ball up orientation. Using these ball transfers in a ball down or angled orientation could reduce the capacity stated.
For technical drawings and 3-D models, click on a part number.
Flange | Mounting Hole | Pad | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Lg. | Wd. | No.of Mounting Holes | Dia. | Ctr.-to-Ctr. | Thick. | Material | Min. Temperature | Max. Temperature | Each | |
Steel Ball | |||||||||||||||
Zinc-Plated Steel Housing | |||||||||||||||
| 1 1/2" | 250 | 2 1/16" | 2 19/32" | Ball Up, Ball Down, Angle | 3" | 3" | 4 | 9/32" | 2 7/16" | 1/4" | Neoprene Rubber | -30°F | 220°F | 0000000 | 000000 |
Stainless Steel Ball | |||||||||||||||
Zinc-Plated Steel Housing | |||||||||||||||
| 1 1/2" | 250 | 1 13/16" | 2 19/32" | Ball Up, Ball Down, Angle | 3" | 3" | 4 | 9/32" | 2 7/16" | 1/4" | Neoprene Rubber | -30°F | 220°F | 0000000 | 00000 |
Stainless Steel Housing | |||||||||||||||
| 1 1/2" | 250 | 2 1/16" | 2 19/32" | Ball Up, Ball Down, Angle | 3" | 3" | 4 | 9/32" | 2 7/16" | 1/4" | Neoprene Rubber | -30°F | 220°F | 0000000 | 00000 |
| 1 1/2" | 350 | 1 13/16" | 2 3/4" | Ball Up | 3" | 3" | 4 | 9/32" | 2 15/32" | 1/4" | Neoprene Rubber | Not Rated | 400°F | 0000000 | 00000 |
Nylon Plastic Ball | |||||||||||||||
Zinc-Plated Steel Housing | |||||||||||||||
| 1 1/2" | 250 | 1 13/16" | 2 19/32" | Ball Up, Ball Down, Angle | 3" | 3" | 4 | 9/32" | 2 7/16" | 1/4" | Neoprene Rubber | -30°F | 220°F | 0000000 | 00000 |
| 1 1/2" | 250 | 1 13/16" | 2 3/4" | Ball Up | 3" | 3" | 4 | 9/32" | 2 15/32" | 1/4" | Neoprene Rubber | Not Rated | 400°F | 0000000 | 00000 |
Stainless Steel Housing | |||||||||||||||
| 1 1/2" | 250 | 1 13/16" | 2 3/4" | Ball Up | 3" | 3" | 4 | 9/32" | 2 15/32" | 1/4" | Neoprene Rubber | Not Rated | 400°F | 0000000 | 00000 |
Washdown Flange-Mount Ball Transfers
To keep out dirt and debris, these flange-mount ball transfers have a double-sealed ball and side vents that expel contaminants. They have a stainless steel ball, so they resist corrosion. They also don’t need to be lubricated. Orient them at an angle to form support stands.
Capacity is given for the ball up orientation. Using these ball transfers in a ball down or angled orientation could reduce the capacity stated.
For technical drawings and 3-D models, click on a part number.
Flange | Mounting Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Housing Color | Lg. | Wd. | No.of Mounting Holes | Dia. | Ctr.-to-Ctr. | Temperature Range, °F | Each | |
Stainless Steel Ball | |||||||||||||
Nylon Plastic Housing | |||||||||||||
| 1" | 525 | 1 25/32" | 2" | Ball Up, Ball Down, Angle | Black | 3" | 3" | 4 | 1/4" | 2 9/32" | -22° to 128° | 0000000 | 0000000 |
Recessed Flange-Mount Ball Transfers
Transfers recess into the mounting surface for a low profile. These ball transfers can be used in an angled working orientation to form support stands.
Steel balls are durable. Stainless steel balls offer the most corrosion resistance. They don’t need to be lubricated. Nylon balls are nonmarking.
Capacity is given for the ball up orientation. Using these ball transfers in a ball down or angled orientation could reduce the capacity stated.
For technical drawings and 3-D models, click on a part number.
Flange | Mounting Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Ht. | Dp. | Dia. | Working Orientation | Lg. | Wd. | Dia. | No.of Mounting Holes | Dia. | Ctr.-to-Ctr. | Temperature Range, °F | Each | ||
Steel Ball | |||||||||||||||
Zinc-Plated Steel Housing | |||||||||||||||
| A | 1" | 75 | 3/4" | 1/2" | 1 3/4" | Ball Up, Ball Down, Angle | 2 1/8" | 2 3/4" | __ | 2 | 7/32" | 2 3/16" | __ | 0000000 | 00000 |
| B | 5/8" | 25 | 13/32" | 5/16" | 7/8" | Ball Up, Ball Down, Angle | __ | __ | 1 5/8" | 2 | 1/8" | 1 3/16" | __ | 0000000 | 00000 |
| B | 3/4" | 55 | 13/32" | 15/32" | 1 3/16" | Ball Up, Ball Down, Angle | __ | __ | 2 13/32" | 2 | 7/32" | 1 3/4" | __ | 0000000 | 0000 |
| B | 1" | 55 | 9/16" | 5/8" | 1 1/2" | Ball Up, Ball Down, Angle | __ | __ | 2 7/8" | 2 | 3/16" | 2 3/16" | __ | 0000000 | 00000 |
| B | 1 1/4" | 275 | 5/8" | 25/32" | 1 25/32" | Ball Up, Ball Down, Angle | __ | __ | 2 29/32" | 2 | 3/16" | 2 5/16" | __ | 0000000 | 00000 |
| B | 1 9/16" | 495 | 27/32" | 1 1/16" | 2 7/16" | Ball Up, Ball Down, Angle | __ | __ | 3 23/32" | 3 | 9/32" | 3" | __ | 0000000 | 00000 |
Black-Oxide Steel Housing | |||||||||||||||
| C | 11/16" | 90 | 27/32" | 5/32" | 21/32" | Ball Up, Ball Down, Angle | __ | __ | 1 5/16" | 3 | 1/8" | 31/32" | __ | 0000000 | 00000 |
| C | 1" | 135 | 1 1/8" | 1/8" | 59/64" | Ball Up, Ball Down, Angle | __ | __ | 1 23/32" | 3 | 5/32" | 1 9/32" | __ | 0000000 | 00000 |
| C | 1 1/8" | 180 | 1 1/4" | 5/32" | 31/32" | Ball Up, Ball Down, Angle | __ | __ | 1 13/16" | 3 | 5/32" | 1 11/32" | __ | 0000000 | 00000 |
| C | 1 1/4" | 225 | 1 3/8" | 1/8" | 1 1/16" | Ball Up, Ball Down, Angle | __ | __ | 2" | 3 | 5/32" | 1 15/32" | __ | 0000000 | 00000 |
| D | 11/16" | 90 | 27/32" | 5/32" | 21/32" | Ball Up, Ball Down, Angle | 1 15/64" | 31/32" | __ | 4 | 1/8" | 11/16", 31/32" | __ | 0000000 | 00000 |
| D | 1" | 135 | 1 1/8" | 1/8" | 59/64" | Ball Up, Ball Down, Angle | 1 3/4" | 1 3/8" | __ | 4 | 5/32" | 1", 1 3/8" | __ | 0000000 | 00000 |
| D | 1 1/8" | 180 | 1 1/4" | 5/32" | 31/32" | Ball Up, Ball Down, Angle | 1 3/4" | 1 3/8" | __ | 4 | 5/32" | 1", 1 3/8" | __ | 0000000 | 00000 |
Steel Housing | |||||||||||||||
| B | 5/8" | 40 | 3/8" | 3/8" | 31/32" | Ball Up, Ball Down, Angle | __ | __ | 1 11/16" | 2 | 1/8" | 1 1/4" | __ | 0000000 | 0000 |
Nylon Plastic Ball | |||||||||||||||
Zinc-Plated Steel Housing | |||||||||||||||
| A | 1" | 75 | 3/4" | 1/2" | 1 3/4" | Ball Up, Ball Down, Angle | 2 1/8" | 2 3/4" | __ | 2 | 7/32" | 2 3/16" | 32° to 195° | 0000000 | 00000 |
| E | 1" | 40 | 1/2" | 27/32" | 1 1/16" | Ball Up, Ball Down, Angle | __ | __ | 1 11/32" | 2 | 7/32" | 1 7/8" | __ | 00000000 | 00000 |
Stainless Steel Ball | |||||||||||||||
Zinc-Plated Steel Housing | |||||||||||||||
| A | 1" | 75 | 3/4" | 1/2" | 1 3/4" | Ball Up, Ball Down, Angle | 2 1/8" | 2 3/4" | __ | 2 | 7/32" | 2 3/16" | __ | 0000000 | 00000 |
| B | 5/8" | 25 | 13/32" | 5/16" | 7/8" | Ball Up, Ball Down, Angle | __ | __ | 1 5/8" | 2 | 1/8" | 1 3/16" | __ | 0000000 | 00000 |
Stainless Steel Housing | |||||||||||||||
| A | 1" | 75 | 3/4" | 1/2" | 1 3/4" | Ball Up, Ball Down, Angle | 2 1/8" | 2 3/4" | __ | 2 | 7/32" | 2 3/16" | __ | 0000000 | 00000 |
| B | 5/8" | 25 | 13/32" | 5/16" | 7/8" | Ball Up, Ball Down, Angle | __ | __ | 1 5/8" | 2 | 1/8" | 1 3/16" | __ | 0000000 | 00000 |
| B | 3/4" | 55 | 13/32" | 15/32" | 1 3/16" | Ball Up, Ball Down, Angle | __ | __ | 2 13/32" | 2 | 7/32" | 1 3/4" | __ | 0000000 | 00000 |
| B | 1" | 120 | 9/16" | 9/16" | 1 3/8" | Ball Up, Ball Down, Angle | __ | __ | 2 7/32" | 2 | 3/16" | 1 25/32" | __ | 0000000 | 00000 |
| B | 1" | 120 | 9/16" | 5/8" | 1 1/2" | Ball Up, Ball Down, Angle | __ | __ | 2 7/8" | 2 | 3/16" | 2 3/16" | __ | 0000000 | 00000 |
| B | 1 1/4" | 275 | 5/8" | 25/32" | 1 25/32" | Ball Up, Ball Down, Angle | __ | __ | 2 29/32" | 3 | 3/16" | 2 5/16" | __ | 0000000 | 00000 |
Heavy Duty Recessed Flange-Mount Ball Transfers
These ball transfers recess into the mounting surface for a low profile. Position them at an angle to form support stands. They are made of steel, so they are durable.
Capacity is given for the ball up orientation. Using these ball transfers in a ball down or angled orientation could reduce the capacity stated.
For technical drawings and 3-D models, click on a part number.
Flange | Mounting Hole | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Ball Dia. | Cap., lbs. | Ht. | Dp. | Dia. | Working Orientation | Lg. | Wd. | Dia. | No.of Mounting Holes | Dia. | Ctr.-to-Ctr. | Each | |
Steel Ball with Top Flange | ||||||||||||||
Black-Oxide Steel Housing | ||||||||||||||
| A | 1/2" | 120 | 5/16" | 5/8" | 15/16" | Ball Up, Ball Down, Angle | 1 7/8" | 1 1/4" | __ | 2 | 5/32" | 1 3/8" | 0000000 | 000000 |
| B | 1" | 500 | 15/32" | 1 5/32" | 1 3/4" | Ball Up, Ball Down, Angle | 2 1/4" | 2 1/4" | __ | 4 | 7/32" | 1 3/4" | 0000000 | 000000 |
| B | 1" | 705 | 1/2" | 1 1/4" | 2" | Ball Up, Ball Down, Angle | 3" | 3" | __ | 4 | 9/32" | 2 9/32" | 0000000 | 000000 |
| B | 1" | 850 | 1/2" | 1 1/4" | 2" | Ball Up, Ball Down, Angle | 3" | 3" | __ | 4 | 5/16" | 2 9/32" | 0000000 | 000000 |
| B | 1 1/2" | 2,240 | 1" | 1 3/8" | 2 3/8" | Ball Up, Ball Down, Angle | 3" | 3" | __ | 4 | 5/16" | 2 9/32" | 0000000 | 000000 |
Zinc-Plated Steel Housing | ||||||||||||||
| C | 1 1/4" | 550 | 15/16" | 13/16" | 2" | Ball Up, Ball Down, Angle | __ | __ | 3" | 2 | 3/16" | 2 15/32" | 0000000 | 000000 |
Shock-Absorbing Recessed Flange-Mount Ball Transfers
The ball in these transfers is spring-loaded to absorb impact. They are recessed for a low profile.
Steel balls are durable. Stainless steel balls offer the most corrosion resistance. They also don’t need to be lubricated.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Max. Deflection @ Load Cap. | Ht. | Dp. | Dia. | Working Orientation | Flange Dia. | No.of Mounting Holes | Dia. | Ctr.-to-Ctr. | Each | |
Steel Ball | ||||||||||||
Zinc-Plated Steel Housing | ||||||||||||
| 1" | 125 | 1/4" @ 65 lbs. | 1/2" | 15/16" | 1 11/16" | Ball Up | 3 1/8" | 3 | 3/16" | 2 3/8" | 0000000 | 000000 |
Stainless Steel Ball | ||||||||||||
Stainless Steel Housing | ||||||||||||
| 1" | 125 | 1/4" @ 65 lbs. | 1/2" | 15/16" | 1 11/16" | Ball Up | 3 1/8" | 3 | 3/16" | 2 3/8" | 0000000 | 000000 |
Washdown Recessed Flange-Mount Ball Transfers
With a ball recessed into the mounting surface, these ball transfers have a low profile. Their double-sealed ball keeps out dirt and debris, and side vents expel contaminants. Because their ball is stainless steel, they resist corrosion. They also don’t need to be lubricated. If you orient them at an angle, you can use them to build support stands.
Capacity is given for the ball up orientation. Using these ball transfers in a ball down or angled orientation could reduce the capacity stated.
For technical drawings and 3-D models, click on a part number.
Flange | Mounting Hole | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Ht. | Dp. | Dia. | Working Orientation | Housing Color | Lg. | Wd. | No.of Mounting Holes | Dia. | Ctr.-to-Ctr. | Temperature Range, °F | Each | |
Stainless Steel Ball | ||||||||||||||
Nylon Plastic Housing | ||||||||||||||
| 1" | 525 | 1/2" | 1 1/4" | 2" | Ball Up, Ball Down, Angle | Black | 3" | 3" | 4 | 1/4" | 2 9/32" | -22° to 128° | 0000000 | 0000000 |
Wheel Transfers
Mount these wheel transfers with the wheel up to transfer heavy objects. Wheel transfers have completely sealed ball bearings for easy swiveling and the best protection against dust and debris. Also known as air cargo or conveyor casters.
Toe guard reduces the likelihood of tripping.
Wheel | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Cap., lbs. | Ht. | Working Orientation | Lg. | Wd. | No. of Mounting Holes | For Screw Size | Temperature Range, °F | Each | |
Wheel Transfers | |||||||||||
Nylon Plastic Wheel | |||||||||||
Zinc Yellow-Chromate Plated Steel Housing | |||||||||||
| 2 1/4" | 1 3/4" | 450 | 3 3/4" | Wheel Up | 4 3/8" | 3 3/16" | 6 | 5/16", 7/16" | 0° to 160° | 0000000 | 000000 |
Wheel Transfers with Toe Guard | |||||||||||
Nylon Plastic Wheel | |||||||||||
Zinc Yellow-Chromate Plated Steel Housing | |||||||||||
| 2 1/4" | 1 3/4" | 450 | 3 3/4" | Wheel Up | 4 3/8" | 3 3/16" | 6 | 5/16", 7/16" | 0° to 160° | 0000000 | 00000 |
Flanged-Wheel Flow Rails
The flange on the wheels separates and guides packages as they flow down the rails. Rails are a lightweight solution when you don't need a complete conveyor in confined spaces such as flow racks and assembly areas. The flange location is based on facing the unloading end of the rail.
Note: Capacities are based on a fully supported rail.
For technical drawings and 3-D models, click on a part number.
Wheel | Overall | Bearing | Mount. Slot | 10 ft. Lg. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flange Location | Dia. | Wd. | Spacing | Projection | Cap. per Wheel, lbs. | Wd. | Ht. | Type | Material | Ball Bearing Material | Lg. | Wd. | Mount. Hole Ctr.-to-Ctr. | Each | |
Zinc-Plated Steel Wheels with Galvanized Steel Frame | |||||||||||||||
| Left | 1 7/8" | 3 1/2" | 3" | 7/8" | 200 | 4 27/32" | 3" | Ball | Steel | Steel | 2" | 3/8" | 3" | 00000000 | 0000000 |
| Right | 1 7/8" | 3 1/2" | 3" | 7/8" | 200 | 4 27/32" | 3" | Ball | Steel | Steel | 2" | 3/8" | 3" | 00000000 | 000000 |