About Casters and Wheels
More
V-Groove Track Wheels
These wheels have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.
Phenolic wheels are nonmarking and perform well at high temperatures.
Polyurethane wheels combine the abrasion resistance of plastic with the shock-absorbing qualities of rubber.
Metal wheels are rugged and long lasting, and can withstand chemicals, high temperatures, and heavy loads.
303 stainless steel is corrosion resistant.
Sleeve bearings prevent wear to the wheel bore but don't roll as easily as other bearings. Roller bearings provide smoother rolling than sleeve bearings. Ball bearings are the easiest to roll. They are completely sealed for the best protection against dust and debris.
Wheel | Groove | Clearance | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Hub Lg. | Cap. per Wheel, lbs. | Wd. | Angle | On 1 1/4" Track | On 1 1/2" Track | On 2" Track | Hardness Rating | Nonmarking Wheels | Temp. Range, °F | Choose For Axle Dia. | Each | |
Black Phenolic Plastic | ||||||||||||||
With Roller Bearings | ||||||||||||||
| 4" | 1 1/2" | 1 15/16" | 380 | 7/8" | 90° | 7/16" | 5/8" | __ | Hard | Yes | -50° to 300° | 1/2" | 0000000 | 000000 |
| 6" | 2" | 2 1/2" | 750 | 7/8" | 90° | 7/16" | 5/8" | __ | Hard | Yes | -50° to 300° | 1/2" | 0000000 | 00000 |
| 6" | 2 1/2" | 3 9/16" | 1,100 | 1 1/4" | 90° | __ | __ | 13/16" | Hard | Yes | -50° to 300° | 3/4" | 0000000 | 00000 |
Green Polyurethane Rubber | ||||||||||||||
With Roller Bearings | ||||||||||||||
| 4" | 2" | 2 3/16" | 300 | 7/8" | 90° | 1/2" | 3/4" | __ | Hard | Yes | -40° to 180° | 1/2" | 00000000 | 00000 |
| 5" | 2" | 2 3/16" | 300 | 7/8" | 90° | 1/2" | 3/4" | __ | Hard | Yes | -40° to 180° | 1/2" | 00000000 | 00000 |
| 6" | 1 7/8" | 2 3/16" | 300 | 7/8" | 90° | 1/2" | 3/4" | __ | Hard | Yes | -40° to 180° | 1/2" | 00000000 | 00000 |
With Sleeve Bearings | ||||||||||||||
| 4" | 2" | 2 3/16" | 300 | 7/8" | 90° | 1/2" | 3/4" | __ | Hard | Yes | -40° to 180° | 1/2" | 00000000 | 00000 |
| 5" | 2" | 2 3/16" | 300 | 7/8" | 90° | 1/2" | 3/4" | __ | Hard | Yes | -40° to 180° | 1/2" | 00000000 | 00000 |
Iron | ||||||||||||||
With Roller Bearings | ||||||||||||||
| 3" | 1 3/8" | 1 11/16" | 450 | 13/16" | 90° | 7/16" | 5/8" | __ | Hard | No | 5° to 210° | 1/2" | 000000 | 00000 |
Red Painted Iron | ||||||||||||||
With Roller Bearings | ||||||||||||||
| 4" | 1 1/2" | 1 15/16" | 800 | 7/8" | 90° | 1/2" | 11/16" | __ | Hard | No | -20° to 320° | 1/2" | 0000000 | 00000 |
| 4" | 2" | 2 3/16" | 1,200 | 7/8" | 90° | 7/16" | 11/16" | __ | Hard | No | -10° to 250° | 00000000 | 00000 | |
| 4" | 2" | 2 1/2" | 800 | 7/8" | 90° | 1/2" | 11/16" | __ | Hard | No | -20° to 320° | 0000000 | 00000 | |
| 5" | 2" | 2 1/2" | 800 | 7/8" | 90° | 1/2" | 11/16" | __ | Hard | No | -20° to 320° | 0000000 | 00000 | |
| 6" | 2" | 2 1/2" | 1,200 | 7/8" | 90° | 1/2" | 11/16" | __ | Hard | No | -20° to 320° | 0000000 | 00000 | |
| 6" | 2 1/2" | 2 13/16" | 3,500 | 7/8" | 90° | __ | __ | 7/8" | Hard | No | -10° to 250° | 3/4" | 00000000 | 000000 |
| 6" | 2 1/2" | 3 9/16" | 2,500 | 7/8" | 90° | __ | __ | 1" | Hard | No | -20° to 320° | 1" | 0000000 | 00000 |
| 6" | 2 3/4" | 3 9/16" | 2,500 | 7/8" | 90° | __ | __ | 1" | Hard | No | -20° to 320° | 1" | 0000000 | 00000 |
| 8" | 2 1/2" | 2 13/16" | 3,500 | 7/8" | 90° | __ | __ | 7/8" | Hard | No | -10° to 250° | 3/4" | 00000000 | 000000 |
| 8" | 2 1/2" | 3 9/16" | 2,500 | 7/8" | 90° | __ | __ | 1" | Hard | No | -20° to 320° | 1" | 0000000 | 000000 |
| 8" | 2 3/4" | 3 9/16" | 2,500 | 1 3/8" | 90° | __ | __ | 3/4" | Hard | No | -20° to 320° | 1" | 0000000 | 000000 |
| 8" | 3" | 3 9/16" | 2,500 | 1 3/8" | 90° | __ | __ | 3/4" | Hard | No | -20° to 320° | 1" | 0000000 | 000000 |
| 10" | 3" | 3 9/16" | 3,000 | 1 3/8" | 90° | __ | __ | 3/4" | Hard | No | -20° to 320° | 1" | 0000000 | 000000 |
Steel | ||||||||||||||
With Roller Bearings | ||||||||||||||
| 6" | 3" | 3 1/4" | 6,000 | 1 3/8" | 90° | __ | __ | 13/16" | Hard | No | -20° to 275° | 1" | 00000000 | 000000 |
| 8" | 4" | 4 1/4" | 8,300 | 1 3/4" | 90° | __ | __ | 11/16" | Hard | No | -20° to 275° | 1 1/4" | 00000000 | 000000 |
| 10" | 3" | 3 1/4" | 5,000 | 1 3/8" | 90° | __ | __ | 7/8" | Hard | No | -20° to 275° | 1" | 00000000 | 000000 |
303 Stainless Steel | ||||||||||||||
With Ball Bearings | ||||||||||||||
| 4" | 1 3/8" | 1 5/8" | 600 | 5/8" | 90° | 9/16" | 3/4" | __ | Hard | No | -40° to 250° | 1/2" | 00000000 | 000000 |
| 4" | 2" | 2 1/2" | 850 | 7/8" | 90° | 7/16" | 5/8" | __ | Hard | No | -40° to 250° | 1/2" | 00000000 | 000000 |
| 5" | 2" | 2 1/2" | 950 | 7/8" | 90° | 7/16" | 5/8" | __ | Hard | No | -40° to 250° | 1/2" | 00000000 | 000000 |
| 6" | 2" | 2 1/2" | 1,200 | 7/8" | 90° | 7/16" | 5/8" | __ | Hard | No | -40° to 250° | 1/2" | 00000000 | 000000 |
Extra-High-Capacity V-Groove Track Casters with Metal Wheels
The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.
Wheels have roller bearings for smooth rolling.
Iron wheels offer the strength and wear resistance you need for heavy loads and long life. Steel wheels provide the highest capacities of any wheel material.
Forged-steel frames are more durable than stamped-steel frames.
Swivel casters with tapered roller bearings are impact resistant and withstand both downward and side force. Swivel casters with ball bearings have smoother swiveling than tapered roller bearings. Swivel casters with double-ball bearings have the smoothest swiveling.
Kingpinless swivel construction distributes impact better than standard kingpin casters, enabling smoother swiveling and extending service life.
Wheel | Rigid | Swivel | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Mounting Plate Style | Groove Wd. | Clearance on 2" Track | Frame Fabrication | Each | Each | ||
Painted Black Solid Iron Wheels—Hard | |||||||||||
| 6" | 2 1/2" | 7 1/2" | 2,500 | 3 | 7/8" | 31/32" | Stamped | 0000000 | 0000000 | 0000000 | 0000000 |
| 6" | 2 1/2" | 8" | 3,500 | 4 | 7/8" | 1 1/16" | Stamped | 0000000 | 000000 | 0000000 | 000000 |
| 6" | 3" | 8" | 5,000 | 4 | 7/8" | 1 1/16" | Stamped | 0000000 | 000000 | 0000000 | 000000 |
| 8" | 3" | 10 1/2" | 5,400 | 4 | 7/8" | 1 1/16" | Stamped | 0000000 | 000000 | 0000000 | 000000 |
| 10" | 3" | 12 1/2" | 5,400 | 4 | 1 3/8" | 7/8" | Stamped | 0000000 | 000000 | 0000000 | 000000 |
Painted Gray Solid Iron Wheels—Hard | |||||||||||
| 6" | 2 1/2" | 7 5/8" | 2,000 | 1 | 7/8" | 1 1/8" | Forged | 000000 | 00 | 0000000 | 000000 |
| 6" | 2 1/2" | 7 5/8" | 2,000 | 2 | 7/8" | 1 1/8" | Forged | 0000000 | 000000 | 000000 | 00 |
| 8" | 2 1/2" | 10 1/8" | 2,000 | 1 | 7/8" | 1 1/8" | Forged | 000000 | 00 | 0000000 | 000000 |
| 8" | 2 1/2" | 10 1/8" | 2,000 | 2 | 7/8" | 1 1/8" | Forged | 0000000 | 000000 | 000000 | 00 |
| 8" | 3" | 10 1/2" | 2,500 | 4 | 7/8" | 1 1/8" | Forged | 0000000 | 000000 | 0000000 | 000000 |
| 10" | 3" | 12 1/2" | 3,000 | 4 | 1 3/8" | 7/8" | Forged | 0000000 | 000000 | 0000000 | 000000 |
Painted Red Solid Iron Wheels—Hard | |||||||||||
| 8" | 2 1/2" | 10 1/8" | 3,000 | 3 | 7/8" | 31/32" | Stamped | 0000000 | 000000 | 0000000 | 000000 |
Solid Steel Wheels—Hard | |||||||||||
| 6" | 3" | 8 1/2" | 6,000 | 5 | 1 3/8" | 7/8" | Forged | 0000000 | 000000 | 000000 | 00 |
| 6" | 3" | 8 1/2" | 6,000 | 6 | 1 3/8" | 7/8" | Forged | 000000 | 00 | 0000000 | 000000 |
| 8" | 4" | 10 1/2" | 8,300 | 5 | 1 3/4" | 11/16" | Forged | 0000000 | 000000 | 000000 | 00 |
| 8" | 4" | 10 1/2" | 8,300 | 6 | 1 3/4" | 11/16" | Forged | 000000 | 00 | 0000000 | 000000 |
High-Capacity V-Groove Wheel Track Casters with Metal Wheels
The wheel of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor. The iron wheels offer the strength and wear resistance you need for heavy loads and long life. They work well on smooth surfaces.
Wheels have roller bearings for smooth rolling.
Swivel casters with ball bearings have smooth swiveling. The kingpinless swivel raceway distributes impact better than standard kingpin casters, enabling smooth swiveling and extending service life. Swivel casters with double-ball bearings have the smoothest swiveling.
Casters with Style 2 mounting plates can handle temperatures up to 350°.
Wheel | Wheel Bearing | Rigid | Swivel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Clearance on 1 1/4" Track | Clearance on 1 1/2" Track | Groove Wd. | Type | Material | Frame Material | Temp. Range, °F | Each | Swivel Bearing Type | Each | ||
Mounting Plate Style 1 | |||||||||||||||
Painted Gray Solid Iron Wheels—Hard | |||||||||||||||
| 4" | 2" | 5 5/8" | 800 | 1/2" | 3/4" | 7/8" | Roller | Steel | Zinc-Plated Steel | -40° to 280° | 0000000 | 000000 | Double Ball | 0000000 | 000000 |
| 5" | 2" | 6 1/2" | 800 | 1/2" | 3/4" | 7/8" | Roller | Steel | Zinc-Plated Steel | -40° to 280° | 0000000 | 00000 | Double Ball | 0000000 | 00000 |
| 6" | 2" | 7 1/4" | 1,000 | 1/2" | 3/4" | 7/8" | Roller | Steel | Zinc-Plated Steel | -40° to 280° | 0000000 | 00000 | Double Ball | 0000000 | 00000 |
Mounting Plate Style 2 | |||||||||||||||
Painted Black Solid Iron Wheels—Hard | |||||||||||||||
| 4" | 2" | 5 5/8" | 800 | 1/8" | 5/16" | 7/8" | Roller | Steel | Painted Steel | -40° to 350° | 0000000 | 00000 | Ball | 0000000 | 000000 |
| 6" | 2" | 7 1/2" | 1,000 | 1/8" | 5/16" | 7/8" | Roller | Steel | Painted Steel | -40° to 350° | 0000000 | 000000 | Ball | 0000000 | 000000 |
High-Capacity Corrosion-Resistant V-Groove
Wheel Track Casters with Metal Wheels
The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor. Their 303 stainless steel wheels are suitable for steam-cleaning applications.
Ball bearings in the wheel provide easy rolling and are shielded for protection against dust and debris.
Swivel casters have double-ball bearings for the smoothest swiveling.
Wheel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Clearance on 1 1/4" Track | Clearance on 1 1/2" Track | Groove Wd. | Wheel Bearing Material | Frame Material | Each | |
Rigid | ||||||||||
Solid 303 Stainless Steel—Hard | ||||||||||
| 4" | 2" | 5 5/8" | 850 | 7/16" | 5/8" | 7/8" | Stainless Steel | 304 Stainless Steel | 00000000 | 0000000 |
| 5" | 2" | 6 1/2" | 950 | 7/16" | 5/8" | 7/8" | Stainless Steel | 304 Stainless Steel | 00000000 | 000000 |
Swivel | ||||||||||
Solid 303 Stainless Steel—Hard | ||||||||||
| 4" | 2" | 5 5/8" | 850 | 7/16" | 5/8" | 7/8" | Stainless Steel | 304 Stainless Steel | 00000000 | 000000 |
| 5" | 2" | 6 1/2" | 950 | 7/16" | 5/8" | 7/8" | Stainless Steel | 304 Stainless Steel | 00000000 | 000000 |
V-Groove Wheel Track Casters with Polyurethane Wheels
The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor. Their polyurethane wheels combine the abrasion resistance of plastic with the impact resistance of rubber. Use them on smooth or rough floors and in areas with debris.
Wheels have roller bearings for smooth rolling.
Swivel casters have double-ball bearings for the smoothest swiveling.
Wheel | Wheel Bearing | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Groove Wd. | Clearance on 1 1/2" Track | Clearance on 1 1/4" Track | Type | Material | Frame Material | Each | |
Rigid | ||||||||||||
Green Solid Wheels—Hard | ||||||||||||
| 4" | 2" | 5 5/8" | 300 | Durometer 60D | 7/8" | 3/4" | 1/2" | Roller | Steel | Zinc-Plated Steel | 0000000 | 000000 |
| 5" | 2" | 6 1/2" | 300 | Durometer 60D | 7/8" | 3/4" | 1/2" | Roller | Steel | Zinc-Plated Steel | 0000000 | 00000 |
Swivel | ||||||||||||
Green Solid Wheels—Hard | ||||||||||||
| 4" | 2" | 5 5/8" | 300 | Durometer 60D | 7/8" | 3/4" | 1/2" | Roller | Steel | Zinc-Plated Steel | 0000000 | 00000 |
| 5" | 2" | 6 1/2" | 300 | Durometer 60D | 7/8" | 3/4" | 1/2" | Roller | Steel | Zinc-Plated Steel | 0000000 | 00000 |
Corrosion-Resistant V-Groove Wheel Track Casters with Polyurethane Wheels
The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor. Polyurethane wheels combine the abrasion resistance of plastic with the shock‐absorbing qualities of rubber. Their 304 stainless steel frame is corrosion resistant.
The wheels have sleeve bearings to prevent wear to the wheel bore, but they don't roll as easily as other bearings.
Swivel casters have double-ball bearings for the smoothest swiveling.
Wheel | Wheel Bearing | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Groove Wd. | Clearance on 1 1/4" Track | Clearance on 1 1/2" Track | Type | Material | Temp. Range, °F | Each | |
Rigid | ||||||||||||
Blue Solid Wheels—Hard | ||||||||||||
| 4" | 2" | 5 5/8" | 400 | Durometer 70D | 7/8" | 7/8" | 3/4" | Sleeve | Acetal Plastic | -40° to 180° | 0000000 | 0000000 |
Green Solid Wheels—Hard | ||||||||||||
| 5" | 2" | 6 1/2" | 300 | Durometer 60D | 7/8" | 7/8" | 3/4" | Sleeve | Acetal Plastic | -40° to 180° | 0000000 | 000000 |
Swivel | ||||||||||||
Blue Solid Wheels—Hard | ||||||||||||
| 4" | 2" | 5 5/8" | 400 | Durometer 70D | 7/8" | 7/8" | 3/4" | Sleeve | Acetal Plastic | -40° to 180° | 0000000 | 000000 |
Green Solid Wheels—Hard | ||||||||||||
| 5" | 2" | 6 1/2" | 300 | Durometer 60D | 7/8" | 7/8" | 3/4" | Sleeve | Acetal Plastic | -40° to 180° | 0000000 | 000000 |