Thread Size Thread Size |
---|
Material Material |
---|
|
Width Width |
---|
Height Height |
---|
Thread Spacing Thread Spacing |
---|
|
For Cotter Pin Diameter For Cotter Pin Diameter |
---|
Minimum Slot Width Minimum Slot Width |
---|
Minimum Slot Depth Minimum Slot Depth |
---|
More
Secure these nuts by inserting a cotter pin or safety wire through the slots and a drilled hole in your bolt for mild loosening resistance. They're also known as castle nuts and slotted nuts. They’re not recommended for use on parts exposed to high vibration because the pin is prone to shearing under prolonged stress. Height includes the slots. Cotter pins are not included. A zinc plating provides corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread Size | Wd. | Ht. | For Cotter Pin Dia. | Min. Slot Wd. | Min. Slot Dp. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||
---|---|---|---|---|---|---|---|---|
1/4"-20 | 7/16" | 7/32" | 1/16" | 0.07" | 0.072" | 50 | 000000000 | 000000 |
1/4"-28 | 7/16" | 7/32" | 1/16" | 0.07" | 0.072" | 50 | 000000000 | 00000 |
5/16"-18 | 1/2" | 17/64" | 5/64" | 0.09" | 0.078" | 25 | 000000000 | 0000 |
5/16"-24 | 1/2" | 17/64" | 5/64" | 0.09" | 0.078" | 25 | 000000000 | 0000 |
3/8"-16 | 9/16" | 21/64" | 7/64" | 0.12" | 0.11" | 25 | 000000000 | 0000 |
3/8"-24 | 9/16" | 21/64" | 7/64" | 0.12" | 0.11" | 25 | 000000000 | 0000 |
7/16"-14 | 11/16" | 3/8" | 3/32" | 0.12" | 0.155" | 25 | 000000000 | 00000 |
7/16"-20 | 11/16" | 3/8" | 3/32" | 0.12" | 0.155" | 25 | 000000000 | 00000 |
1/2"-13 | 3/4" | 7/16" | 1/8" | 0.15" | 0.148" | 25 | 000000000 | 0000 |
1/2"-20 | 3/4" | 7/16" | 1/8" | 0.15" | 0.148" | 25 | 000000000 | 0000 |
9/16"-12 | 7/8" | 31/64" | 7/64" | 0.15" | 0.163" | 10 | 000000000 | 0000 |
9/16"-18 | 7/8" | 31/64" | 7/64" | 0.15" | 0.163" | 5 | 000000000 | 0000 |
5/8"-11 | 15/16" | 35/64" | 5/32" | 0.18" | 0.219" | 10 | 000000000 | 0000 |
5/8"-18 | 15/16" | 35/64" | 5/32" | 0.18" | 0.195" | 10 | 000000000 | 0000 |
3/4"-10 | 1 1/8" | 21/32" | 5/32" | 0.18" | 0.265" | 10 | 000000000 | 0000 |
3/4"-16 | 1 1/8" | 21/32" | 5/32" | 0.18" | 0.265" | 10 | 000000000 | 00000 |
7/8"-9 | 1 5/16" | 3/4" | 5/32" | 0.18" | 0.204" | 5 | 000000000 | 0000 |
7/8"-14 | 1 5/16" | 3/4" | 5/32" | 0.18" | 0.204" | 5 | 000000000 | 0000 |
1"-8 | 1 1/2" | 55/64" | 3/16" | 0.24" | 0.241" | 5 | 000000000 | 00000 |
1"-14 | 1 1/2" | 55/64" | 3/16" | 0.24" | 0.241" | 5 | 000000000 | 00000 |
1 1/4"-7 | 1 7/8" | 1 3/32" | 9/32" | 0.31" | 0.297" | 1 | 000000000 | 0000 |
1 1/4"-12 | 1 7/8" | 1 1/16" | 9/32" | 0.31" | 0.33" | 1 | 000000000 | 0000 |
1 1/2"-6 | 2 1/4" | 1 5/16" | 5/16" | 0.37" | 0.457" | 1 | 000000000 | 0000 |
1 1/2"-12 | 2 1/4" | 1 5/16" | 5/16" | 0.37" | 0.457" | 1 | 000000000 | 0000 |
1 3/4"-5 | 2 5/8" | 1 1/2" | 3/8" | 0.43" | 0.44" | 1 | 000000000 | 00000 |
1 3/4"-12 | 2 5/8" | 1 1/2" | 3/8" | 0.43" | 0.44" | 1 | 000000000 | 00000 |
2"-4 1/2 | 3" | 1 23/32" | 3/8" | 0.43" | 0.485" | 1 | 000000000 | 00000 |
2"-12 | 3" | 1 23/32" | 3/8" | 0.43" | 0.485" | 1 | 000000000 | 00000 |
Often referred to as castle nuts, secure these by inserting a cotter pin or safety wire through the slots and a drilled hole in your bolt for mild loosening resistance. They’re not recommended for use on parts exposed to high vibration because the pin is prone to shearing under prolonged stress. Height includes the slots. Cotter pins are not included.
Zinc-plated steel locknuts resist corrosion in wet environments.
Steel locknuts are best for dry environments, since moisture will cause them to rust. They are weldable and can be painted or finished.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Wd., mm | Ht., mm | For Cotter Pin Dia., mm | Min. Slot Wd., mm | Min. Slot Dp., mm | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel—Class 8 | ||||||||||
M6 | 1 | 10 | 7.5 | 1.6 | 2 | 2.5 | DIN 935 | 5 | 000000000 | 00000 |
M8 | 1.25 | 13 | 9.5 | 2 | 2.5 | 3 | DIN 935 | 5 | 000000000 | 0000 |
M10 | 1.5 | 17 | 12 | 2.5 | 2.8 | 4 | DIN 935 | 5 | 000000000 | 0000 |
M12 | 1.5 | 19 | 15 | 3.2 | 3.5 | 5 | DIN 935 | 5 | 000000000 | 0000 |
M12 | 1.75 | 19 | 15 | 3.2 | 3.5 | 5 | DIN 935 | 5 | 000000000 | 0000 |
M14 | 1.5 | 22 | 16 | 3.2 | 3.5 | 5 | DIN 935 | 1 | 000000000 | 0000 |
M14 | 2 | 22 | 16 | 3.2 | 3.5 | 5 | DIN 935 | 1 | 000000000 | 0000 |
M16 | 1.5 | 24 | 19 | 4 | 4.5 | 6 | DIN 935 | 10 | 000000000 | 00000 |
M16 | 2 | 24 | 19 | 4 | 4.5 | 6 | DIN 935 | 5 | 000000000 | 0000 |
M18 | 2.5 | 27 | 21 | 4 | 4.5 | 6 | DIN 935 | 1 | 000000000 | 0000 |
M20 | 2.5 | 30 | 22 | 4 | 4.5 | 6 | DIN 935 | 5 | 000000000 | 00000 |
M24 | 2 | 36 | 27 | 5 | 5.5 | 8 | DIN 935 | 1 | 000000000 | 0000 |
M24 | 3 | 36 | 27 | 5 | 5.5 | 8 | DIN 935 | 1 | 000000000 | 0000 |
M27 | 3 | 41 | 30 | 5 | 5.5 | 8 | DIN 935 | 1 | 000000000 | 00000 |
M30 | 3.5 | 46 | 33 | 6.3 | 7 | 9 | DIN 935 | 1 | 000000000 | 00000 |
Steel—Class 8 | ||||||||||
M12 | 1.5 | 19 | 15 | 3.2 | 3.5 | 5 | DIN 935 | 10 | 000000000 | 0000 |
M14 | 1.5 | 22 | 16 | 3.2 | 3.5 | 5 | DIN 935 | 1 | 000000000 | 0000 |
M14 | 2 | 22 | 16 | 3.2 | 3.5 | 5 | DIN 935 | 1 | 000000000 | 0000 |
M16 | 1.5 | 24 | 19 | 4 | 4.5 | 6 | DIN 935 | 1 | 000000000 | 0000 |
M16 | 2 | 24 | 19 | 4 | 4.5 | 6 | DIN 935 | 1 | 000000000 | 0000 |
M18 | 2.5 | 27 | 21 | 4 | 4.5 | 6 | DIN 935 | 1 | 000000000 | 0000 |
M20 | 2.5 | 30 | 22 | 4 | 4.5 | 6 | DIN 935 | 1 | 000000000 | 0000 |
M24 | 3 | 36 | 27 | 5 | 5.5 | 8 | DIN 935 | 1 | 000000000 | 0000 |
M30 | 3.5 | 46 | 33 | 6.3 | 7 | 9 | DIN 935 | 1 | 000000000 | 0000 |
M36 | 3 | 55 | 38 | 6.3 | 7 | 9 | DIN 935 | 1 | 000000000 | 00000 |
M36 | 4 | 55 | 38 | 6.3 | 7 | 9 | DIN 935 | 1 | 000000000 | 00000 |
M42 | 4.5 | 65 | 46 | 8 | 9 | 12 | DIN 935 | 1 | 000000000 | 00000 |
M48 | 5 | 75 | 50 | 8 | 9 | 12 | DIN 935 | 1 | 000000000 | 00000 |
M56 | 5.5 | 85 | 57 | 8 | 9 | 12 | DIN 935 | 1 | 000000000 | 00000 |
Also known as castle nuts, secure these nuts by inserting a cotter pin or safety wire through the slots and a drilled hole in your bolt for mild loosening resistance. They’re not recommended for use on parts exposed to high vibration because the pin is prone to shearing under prolonged stress. Height includes the slots. Cotter pins are not included. They're zinc plated to resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread Size | Wd. | Ht. | For Cotter Pin Dia. | Min. Slot Wd. | Min. Slot Dp. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel—Grade 5 | ||||||||
---|---|---|---|---|---|---|---|---|
1/4"-20 | 7/16" | 7/32" | 1/16" | 0.07" | 0.072" | 25 | 000000000 | 000000 |
5/16"-18 | 1/2" | 17/64" | 5/64" | 0.09" | 0.078" | 25 | 000000000 | 00000 |
3/8"-16 | 9/16" | 21/64" | 7/64" | 0.12" | 0.11" | 25 | 000000000 | 0000 |
7/16"-14 | 11/16" | 3/8" | 7/64" | 0.12" | 0.135" | 25 | 000000000 | 0000 |
1/2"-13 | 3/4" | 7/16" | 7/64" | 0.15" | 0.137" | 10 | 000000000 | 0000 |
5/8"-11 | 15/16" | 35/64" | 5/32" | 0.18" | 0.195" | 10 | 000000000 | 0000 |
3/4"-10 | 1 1/8" | 41/64" | 5/32" | 0.18" | 0.217" | 5 | 000000000 | 0000 |
1"-8 | 1 1/2" | 55/64" | 3/16" | 0.24" | 0.241" | 1 | 000000000 | 0000 |
These locknuts have good chemical resistance and may be mildly magnetic. Also known as castle nuts, secure them by inserting a cotter pin or safety wire through the slots in the nut and a drilled hole in your bolt for mild loosening resistance. They’re not recommended for use on parts exposed to high vibration because the pin is prone to shearing under prolonged stress. Height includes the slots. Cotter pins are not included.
For technical drawings and 3-D models, click on a part number.
Thread Size | Wd. | Ht. | For Cotter Pin Dia. | Min. Slot Wd. | Min. Slot Dp. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
10-32 | 3/8" | 1/4" | 3/64" | 0.06" | 0.09" | 5 | 000000000 | 000000 |
1/4"-20 | 7/16" | 9/32" | 1/16" | 0.07" | 0.09" | 5 | 000000000 | 0000 |
1/4"-28 | 7/16" | 9/32" | 1/16" | 0.07" | 0.09" | 5 | 000000000 | 00000 |
5/16"-18 | 1/2" | 21/64" | 5/64" | 0.09" | 0.09" | 5 | 000000000 | 00000 |
5/16"-24 | 1/2" | 21/64" | 5/64" | 0.09" | 0.09" | 5 | 000000000 | 00000 |
3/8"-16 | 9/16" | 13/32" | 3/32" | 0.12" | 0.13" | 1 | 000000000 | 0000 |
3/8"-24 | 9/16" | 13/32" | 3/32" | 0.12" | 0.13" | 1 | 000000000 | 0000 |
1/2"-13 | 3/4" | 9/16" | 1/8" | 0.15" | 0.15" | 1 | 000000000 | 0000 |
1/2"-20 | 3/4" | 9/16" | 1/8" | 0.15" | 0.15" | 1 | 000000000 | 0000 |
5/8"-11 | 15/16" | 23/32" | 5/32" | 0.18" | 0.21" | 1 | 000000000 | 0000 |
5/8"-18 | 15/16" | 23/32" | 5/32" | 0.18" | 0.21" | 1 | 000000000 | 0000 |
3/4"-10 | 1 1/8" | 13/16" | 5/32" | 0.18" | 0.25" | 1 | 000000000 | 00000 |
3/4"-16 | 1 1/8" | 13/16" | 5/32" | 0.18" | 0.25" | 1 | 000000000 | 00000 |
7/8"-9 | 1 5/16" | 29/32" | 5/32" | 0.18" | 0.25" | 1 | 000000000 | 00000 |
1"-8 | 1 1/2" | 1" | 3/16" | 0.24" | 0.28" | 1 | 000000000 | 00000 |
1 1/4"-7 | 1 7/8" | 1 1/4" | 7/32" | 0.31" | 0.37" | 1 | 000000000 | 00000 |
1 1/2"-6 | 2 1/4" | 1 1/2" | 1/4" | 0.37" | 0.43" | 1 | 000000000 | 00000 |