Frame Style Frame Style |
---|
![]() |
Full Barrel |
![]() |
Half Barrel |
![]() |
Skeleton |
Applicator Type Applicator Type |
---|
|
Dispense sealants from cartridges with ease and control.
Ratchet-action guns only apply pressure to the cartridge while you pull the trigger. They’re good for use with thin materials that require flow control.
Smooth-action guns apply more consistent pressure to the cartridge, so flow continues between trigger pulls. These guns are often used with thick materials that require strength to dispense and maintain flow.
To choose a thrust ratio, consider the thickness of the material—thinner materials such as silicone and latex flow easily, so choose a low thrust ratio gun. Thick materials such as urethanes and epoxies require more power to dispense, so choose a high thrust ratio.
Style | For Cartridge Size, oz. | Thrust Ratio | Pressure Rod Action | Frame Style | Material | Handle Material | Features | Each | |
A | 10-13 | 5:1 | Ratchet | Half Barrel | Metal | Metal | Adjustable Stroke | 0000000 | 00000 |
B | 10-13 | 10:1 | Smooth | Skeleton | Metal | Metal | Bead Smoothing Tool, Cartridge Puncture Tool, Spout Cutter, Two Cartridge Caps | 0000000 | 0000 |
B | 29-32 | 10:1 | Smooth | Skeleton | Metal | Metal | Cartridge Puncture Tool, Spout Cutter | 0000000 | 00000 |
C | 10-13 | 6:1 | Ratchet | Half Barrel | Metal | Rubber | Cartridge Puncture Tool, Spout Cutter | 0000000 | 00000 |
C | 10-13 | 12:1 | Smooth | Half Barrel | Metal | Rubber | Cartridge Puncture Tool, Spout Cutter | 00000000 | 00000 |
C | 29-32 | 6:1 | Ratchet | Half Barrel | Metal | Rubber | Cartridge Puncture Tool, Spout Cutter | 0000000 | 00000 |
D | 8.5-10 | 26:1 | Ratchet | Half Barrel | Metal | Metal | __ | 0000000 | 00000 |
D | 10-13 | 18:1 | Smooth | Skeleton | Metal | Metal | Cartridge Puncture Tool, Rotating Frame, Spout Cutter | 00000000 | 00000 |
D | 29-32 | 18:1 | Smooth | Skeleton | Metal | Metal | Cartridge Puncture Tool, Rotating Frame, Spout Cutter | 00000000 | 00000 |
E | 10-13 | 26:1 | Smooth | Skeleton | Metal | Metal | Rotating Frame | 00000000 | 00000 |
F | 9 | 26:1 | Smooth | Skeleton | Metal | Metal | Adjustable Stroke, Rotating Frame | 0000000 | 00000 |
Minimize mess and waste—when you release the trigger on these guns, the rod retracts slightly to reduce pressure, which stops flow from the sealant cartridge.
To choose a thrust ratio, consider the thickness of the material—thinner materials such as silicone and latex flow easily, so choose a low thrust ratio gun. Thick materials such as urethanes and epoxies require more power to dispense, so choose a high thrust ratio.
Style | For Cartridge Size, oz. | Thrust Ratio | Pressure Rod Action | Frame Style | Material | Handle Material | Features | Each | |
A | 10-13 | 7:1 to 10:1 | Smooth | Skeleton | Metal | Metal | Adjustable Thrust Ratio, Cartridge Puncture Tool, Spout Cutter | 0000000 | 00000 |
B | 10-13 | 10:1 | Smooth | Skeleton | Metal | Metal | Bead Smoothing Tool, Cartridge Puncture Tool, Spout Cutter, Two Cartridge Caps | 0000000 | 0000 |
C | 10-13 | 10:1 | Smooth | Skeleton | Metal | Rubber | Cartridge Puncture Tool, Spout Cutter | 0000000 | 0000 |
D | 10-13 | 12:1 | Smooth | Skeleton | Metal | Rubber | Adjustable Stroke, Cartridge Puncture Tool, Dual Stroke, Rotating Frame, Spout Cutter | 0000000 | 00000 |
E | 10-13 | 10:1 | Smooth | Skeleton | Metal | Rubber | Cartridge Puncture Tool, Spout Cutter | 0000000 | 00000 |
F | 10-13 | 10:1 | Smooth | Half Barrel | Metal | Plastic | Cartridge Puncture Tool, Spout Cutter | 0000000 | 0000 |
G | 10-13 | 10:1 | Smooth | Half Barrel | Metal | Metal | Bead Smoothing Tool, Cartridge Puncture Tool, Spout Cutter, Two Cartridge Caps | 0000000 | 0000 |
H | 10-13 | 6:1 | Ratchet | Half Barrel | Metal | Metal | Cartridge Puncture Tool, Spout Cutter | 0000000 | 0000 |
H | 29-32 | 6:1 | Ratchet | Half Barrel | Metal | Metal | Cartridge Puncture Tool, Spout Cutter | 0000000 | 00000 |
Power without a cord means you can take these guns wherever you need them. Material flow stops when you release the trigger to prevent dripping.
Guns | Replacement Batteries | Replacement Chargers | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Cartridge Size, oz. | Max. Cartridges Dispensed per Charge | Frame Style | Material | Handle Material | Batteries Included | Battery Charging Time, min. | Battery Charger Included | Features | Each | Pkg. Qty. | Pkg. | Each | |||
10 | 200 | Half Barrel | Plastic | Plastic | Yes | 30 | Yes | Anti-Drip Control, Cartridge Puncture Tool, Rotating Frame, Variable-Speed Control | 0000000 | 0000000 | 1 | 000000000 | 000000 | 000000 | 00 |
29 | 150 | Half Barrel | Plastic | Plastic | Yes | 30 | Yes | Anti-Drip Control, Variable-Speed Control | 0000000 | 000000 | 1 | 0000000 | 00000 | 0000000 | 000000 |
Adjust air-flow for precise control and smooth material flow—these guns have a built-in pressure regulator with a control knob.
Guns | Replacement Pressure Regulators | Replacement Front Caps | Replacement Rear-Cap Assemblies | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Cartridge Size, oz. | Max. Air Pressure, psi | Frame Style | Pipe Size | Thread Type | Gender | Material | Handle Material | Each | Each | Each | Each | ||||
10 | 75 | Full Barrel | 1/4 | BSPP | Male | Metal | Plastic | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 |
20 | 100 | Full Barrel | 1/4 | BSPP | Male | Metal | Plastic | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 |
29 | 100 | Full Barrel | 1/4 | BSPP | Male | Metal | Plastic | 00000000 | 000000 | 00000000 | 00000 | 000000 | 00 | 00000000 | 00000 |
Let compressed air do the work for you.
For Cartridge Size, oz. | Max. Air Pressure, psi | Frame Style | Pipe Size | Thread Type | Gender | Material | Handle Material | Each | |
10 | 90 | Full Barrel | 1/4 | NPT | Female | Steel | Aluminum | 0000000 | 000000 |
Opening Wd. | Lg. | Pipe Size | Thread Type | Material | Each | |
3/8" | 3" | 3/8 | NPSM | Metal | 0000000 | 000000 |
Apply sealants from pails and drums. Immerse the nozzle in the caulk and pull back the rod to fill.
16-oz. capacity gun also accepts cartridges.
Sausage-style pack conversion kit (sold separately) allows 16-oz. and 30-oz. capacity guns to accept 10-oz. and 20-oz. sausage packs.
Nozzle | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, oz. | For Cartridge Size, oz. | Shape | Opening ID | Pipe Size | Thread Type | Thrust Ratio | Pressure Rod Action | Frame Style | Material | Handle Material | Each | |
16 | 10-13 | Round | 1/2" | 3/8 | NPSM | 12:1 | Smooth | Full Barrel | Metal | Metal | 0000000 | 000000 |
30 | __ | Round | 1/2" | 3/8 | NPSM | 12:1 | Smooth | Full Barrel | Metal | Metal | 000000 | 00000 |
80 | __ | Round | 3/4" | 3/8 | NPSM | 12:1 | Smooth | Full Barrel | Metal | Metal | 000000 | 000000 |
Opening Wd. | Lg. | Pipe Size | Thread Type | Each | |
3/8" | 3" | 3/8 | NPSM | 0000000 | 000000 |
Each | ||
000000 | 000000 |
Angle joints pivot up to 45°.
For Manufacturer | Lg. | Includes | Each | |
Albion, Cox, Newborn | 6 1/2" | Adapter, Two Angle Joints, Four Nozzles | 0000000 | 00000 |
Dispense sealants packaged in sausage packs. Use different barrel colors to identify the sealant inside.
Achieve the perfect bead every time.
Lg. | Wd. | Ht. | Material | Tip Material | Includes | Each | |
3 3/4" | 3/4" | 1" | Plastic | Rubber | Two Cartridge Caps | 0000000 | 00000 |