Direct your signal with these lights; they flash in one direction.

Place these lights in full sun and their batteries charge during daylight hours. Lights automatically switch on at dusk and off at dawn.

These lights can switch between continuous, flashing, or revolving.

Mount these lights to the top of towers to warn low-flying aircraft. They meet FAA L-810 requirements for obstruction lighting.

Mounted on a tripod, these lights stand higher for greater visibility than other strobe lights.

A series of four flashes per cycle makes these lights more visible than other strobe lights.

A series of four flashes per cycle makes these lights more visible than other strobe lights.

Set these portable lights wherever you need a signal light—they don't need to be wired or plugged in.

The buzzer warns workers of hazards even when they’re outside a direct line of sight.

Lights combine high-visibility strobes with a buzzer that warns workers of hazards even when they’re outside a direct line of sight.

Mount the M22 male thread on the bottom of the light through a hole and then secure using the included nut.

Use these lights in tight spaces in place of a tower. They emit three colors from a single lens.

Mount these lights horizontally or vertically in places where a tower will not fit.

These lights emit three colors from a single lens and can be mounted in tight spaces where a tower will not fit.

The quick-connect four-pole M12 plug on these lights makes them easy to hook up and configure.

Get notified about equipment issues even when you aren't around your machines. These lights connect to your computer via Ethernet, allowing you to set up email alerts when there is a problem with a machine, server, or conveyor.

When motion is detected from both directions at a two-way corner, these lights flash to alert personnel and prevent collisions.