All cords have a country-specific plug on one end and an IEC socket on the other end.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

The shielding blocks signal interference from nearby equipment and devices.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

Plug these cords into fans that have quick-disconnect terminals.

Plug these adapter cords into a standard outlet and they change AC voltage to DC voltage.

To run DC-powered lab and medical equipment from your outlet, add a power cord with the plug style and length you need. These adapters meet strict IEC, UL, or ANSI/AAMI standards for use with medical devices.

Power devices that require less than 120 volts AC.

Plug these cords into computers, lab equipment, and office machines that have IEC connections.

Carry DC power in or out of electronic devices with these cords. All have industry standard barrel-style connections, letting you power electronics from power supplies.

The threaded ends on these cords seal out contaminants and resist coming loose from vibration in tough industrial environments and automated systems while sending power and signal to devices with M12 connections.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices.

With a single cord, these splitters join two devices with M12 connectors to a distribution block or I/O module with M12 connectors. Often used with sensors and actuators, they send signals/power to your devices through one connection.

Send signal and power to low-current devices with M8 connections near welding, metal machining, and in spots where temperatures change.

With a higher maximum current than nano M8 and micro M12 cords, these mini cords are often used with automated systems, motors, and pumps.

These cords have a Nano M8 connector (also known as a pico connector) on one end and an USB Type-A connector on the other.

Connect batteries to each other or to electrical systems.

Use these cords in vehicles and other agricultural and construction equipment.

Similar to branches extending from a tree, these cords disperse power from a main power line to run a chain of devices. Power high-amperage fans, pumps, and other machines in motor controls, conveyors, and sorting and packaging systems.

A few turns is all it takes to join these cords, which have thick threads similar to a light bulb, for a secure connection in washdown and high-vibration areas. They detach just as fast for frequent maintenance.

Connect multiple M8 and M12 cords to create a network between equipment. These blocks are often used to send signal and power to proximity switches and sensors.

The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

In addition to an outlet on the end, these cords have multiple inline outlets.

Keep personnel safe from electric shock with these cords.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Give the connectors on these cords a quarter turn to lock in place.

Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.

The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

An isolated ground connection on these outlets protects computers and other sensitive equipment from external signals that interfere with the equipment’s performance.

With a rubber housing, these outlet strips withstand drops and other impact.

Connect multiple devices from a single outlet.

These curved outlet strips clamp onto a pole or table leg.

Install these extra-long strips onto the frame of an electrical cabinet.

Bring power to workstations that are not near a wall—these poles mount from the ceiling.

Power devices that have a straight-blade connection from a vehicle outlet.

Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.

With Kevlar-reinforced nylon armor and a high-strength aluminum connector, these USB cords stand up to frequent use and bending better than standard USB cords.