Cast Iron Cement | McMaster-Carr

Clear All

	Container Type Container Type


Brush-Top Can	Can

Pail	Tube

Cartridge	Brush-Top Bottle

Bottle	Mixer Cup

Stick	Jar

	For Use On For Use On	Show

Cast Iron

	For Use On For Use On	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	Maximum Temperature Maximum Temperature

Less than 250° F

250° to 999° F

2,000° to 2,999° F

	For Joining For Joining

	Color Color

	Clear		Gray
	Beige		Black
	White		Amber
	Gold		Dark Gray
	Light Yellow

	Container Size Container Size

	Consistency Consistency

	Type Type

Adhesive

Surface Filler

	Formulation Formulation

	Adhesive Type Adhesive Type

Contact

Ceramic

	Reaches Full Strength Reaches Full Strength

	Mixing Required Mixing Required

Yes

	Begins to Harden Begins to Harden

	Cure Type Cure Type

Room Temperature

Heat

	Manufacturer Manufacturer

Pliobond

Loctite®

Devcon

	Manufacturer Model Number Manufacturer Model Number

	Minimum Temperature Minimum Temperature

	Clarity Clarity

Clear

Semi-Clear

Opaque

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Elongation Elongation

400%

Not Rated

	Shear Strength Shear Strength

	Approximate Coverage Approximate Coverage

	Viscosity Viscosity

View catalog pages (7)

Forward

How can we improve?

30 Products

About Structural Adhesives

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

Black adhesive works especially well on foam insulation.

Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

	Container
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Consistency	Viscosity, cP	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		Each
3M Adhesives
1357	1 gal.	Can	10 min.	24 hrs.	158	Thin Liquid	325	-30° to 220°	Light Yellow	Ceramic, Glass, Masonry, Metal, Wood	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	00000000	0000000
2262	32 oz.	Can	10 min.	24 hrs.	Not Rated	Thin Liquid	525	-10° to 230°	Clear	Metal, Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	00000000	000000
Pliobond Adhesives
20	1 oz.	Tube	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Glass, Metal, Plastic, Rubber	__	0000000	0000
25	3 oz.	Brush-Top Bottle	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	__	0000000	00000
25	8 oz.	Brush-Top Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	__	0000000	00000
25	16 oz.	Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	__	0000000	00000
25	32 oz.	Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	00000
25	1 gal.	Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	000000
Adhesives
__	16 oz.	Brush-Top Can	3 min.	36 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 250°	Black	Foam, Masonry, Metal, Plastic, Rubber	__	00000000	00000

High-Temperature Contact Adhesives

These adhesives resist temperatures up to 500° F, as well as chemicals, fuels, grease, and water. Apply them to both surfaces, air dry, and then bring together to bond. Heat to 300° F to reach full strength. They cannot be sold to the regions listed because these adhesives exceed local regulatory limits on VOCs (volatile organic compounds).

	Container
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Heating Requirements to Reach Full Strength	Shear Strength, lbs./sq. in.	Cure Type	Consistency	Viscosity, cP	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		Each
Pliobond Adhesives
HT-30	32 oz.	Can	3 min.	30 min.	30 min. @ 300° F	1,450	Heat, Room Temperature	Thick Liquid	6,500	-40° to 500°	Beige	Ceramic, Metal	CT, DC, DE, Los Angeles Area, MA, MD, ME, NJ, Northern VA, NY, PA, RI, UT, VT	000000	000000
HT-30	1 gal.	Can	3 min.	30 min.	30 min. @ 300° F	1,450	Heat, Room Temperature	Thick Liquid	6,500	-40° to 500°	Beige	Ceramic, Metal	CT, DC, DE, Los Angeles Area, MA, MD, ME, NJ, Northern VA, NY, PA, RI, UT, VT	000000	000000

Ceramic Adhesives

Often used for bonding and repair on exhaust systems, diesel engines, and gas turbines, these adhesives withstand high temperatures and provide excellent electrical insulation. Pastes will not drip or sag while hardening on a vertical surface, while thick liquids flow into small spaces and are easy to spread.

Container
Size, oz.	Type	Begins to Harden	Reaches Full Strength	Thermal Conductivity, W/m-K	Consistency	Viscosity, cP	Max. Temp., °F	Color	For Joining		Each
8	Pail	20 min.	48 hrs.	0.865	Thick Liquid	90,000	2300°	Gray	Ceramic, Metal	0000000	000000
8	Pail	20 min.	48 hrs.	0.865	Paste	130,000	2300°	Gray	Ceramic, Metal	0000000	00000
8	Pail	20 min.	48 hrs.	0.865	Paste	190,000	2300°	Gray	Ceramic, Metal	0000000	00000
64	Pail	20 min.	48 hrs.	0.865	Paste	130,000	2300°	Gray	Ceramic, Metal	0000000	000000
64	Pail	20 min.	48 hrs.	0.865	Paste	190,000	2300°	Gray	Ceramic, Metal	0000000	000000

Surface Fillers

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

Devcon Metal Patch & Fill repairs worn, rusted, and corroded surfaces with less preparation.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On	Pkg. Qty.		Pkg.
Loctite® Fixmaster Epoxy
EA 445	0.1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 445	1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 9131	0.1 oz.	Mixer Cup	90	24 hrs.	Thick Liquid	1.5:1	1 sq. in. @ 1/4"	-65° to 180°	White	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	00000
														Each
Devcon Metal Patch & Fill
S-50	3 oz.	Tube	20	6 hrs.	Paste	__	6 sq. in. @ 1/4"	40° to 400°	Gray	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic, Glass	__	00000000	0000

Fuel-Resistant Surface Fillers

Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.

1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.

Container
Size, pt.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
1.5	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	000000
3	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	00000

High-Temperature Surface Fillers for Metal

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F. Fillers that have a mix ratio are multi-part fillers. The size listed is the combined total of the parts.

Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.

Container
Size, oz.	Type	Begins to Harden	Reaches Full Strength, hrs.	Heating Requirements to Reach Full Strength	Consistency	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Surface Fillers
4	Stick	90 min.	72	__	Putty	16 sq. in. @ 1/4"	-40° to 450°	Gold	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	0000000	00000
8	Can	5 hrs.	6	2 hrs. air dry then 4 hrs. @ 200° F	Putty	32 sq. in. @ 1/4"	Not Rated to 2000°	Dark Gray	Sand	Steel, Stainless Steel, Cast Iron	0000000	00000
16	Bottle	5 hrs.	6	2 hrs. air dry then 4 hrs. @ 200° F	Putty	65 sq. in. @ 1/4"	Not Rated to 2000°	Dark Gray	Sand	Steel, Stainless Steel, Cast Iron	0000000	000000

Fine-Particle Abrasion-Resistant Surface Fillers for Metal

For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.

	Container
Mfr. Model No.	Size, lbs.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Wear Resistant Putty
PC 7222	1	Jar	30	24	Putty	2:1	50 sq. in. @ 1/4"	1"	Yes	-20° to 220°	Gray	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	0000000	000000

Thick High-Temperature Gasketing Adhesives in Cartridges

The adhesive seals fiberglass gaskets into stove doors as well as seals cracks in metal. Use the cartridge with a standard caulk gun for quick and easy dispensing.

Container Size, oz.	Begins to Harden, min.	Reaches Full Strength, hrs.	Heating Requirements for Reaching Full Strength	Max. Temp., °F	Color	For Use On		Each
10.3	60	3	1 hr. air dry then 2 hrs. @ 500° F	2000°	Black	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass, Masonry	0000000	00000

Thick High-Temperature Gasketing Adhesives

Seal fiberglass gaskets into stove doors as well as seals cracks in metal.

Container
Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Heating Requirements for Reaching Full Strength	Max. Temp., °F	Color	For Use On		Each
2.3	Tube	60	3	1 hr. air dry then 2 hrs. @ 500° F	2000°	Black	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass, Masonry	0000000	00000

Thin High-Temperature Gasketing Adhesives

This adhesive is easy flowing for bonding fiberglass gaskets to cast iron and steel.

Container
Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Heating Requirements for Reaching Full Strength	Max. Temp., °F	Color	For Use On		Each
2.3	Tube	60	3	1 hr. air dry then 2 hrs. @ 500° F	2000°	Black	Steel, Cast Iron, Fiberglass	0000000	00000

Thin High-Temperature Gasketing Adhesives in Cartridges

The adhesive is easy flowing for bonding fiberglass gaskets to cast iron and steel. Use the cartridge with a standard caulk gun for quick and easy dispensing.

Container Size, oz.	Begins to Harden, min.	Reaches Full Strength, hrs.	Heating Requirements for Reaching Full Strength	Max. Temp., °F	Color	For Use On		Each
10.3	60	3	1 hr. air dry then 2 hrs. @ 500° F	2000°	Black	Steel, Cast Iron, Fiberglass	0000000	00000