For Use On For Use On | Show |
|---|
|
For Use On For Use On | Hide |
|---|
Type Type |
|---|
|
Formulation Formulation |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Consistency Consistency |
|---|
|
Cure Type Cure Type |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Clarity Clarity |
|---|
|
Shear Strength Shear Strength |
|---|
|
Approximate Coverage Approximate Coverage |
|---|
|
Peel Strength Peel Strength |
|---|
|
About Structural Adhesives
More
Contact Adhesives
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | For Joining | Each | |
3M Adhesives | ||||||||||||||
| 4475 | 32 oz. | Can | 10 min. | 72 hrs. | Not Rated | Thick Liquid | 8,500 | -10° to 230° | Clear | Ceramic, Fabric, Glass, Plastic, Rubber | CT, DC, DE, Los Angeles Area, MA, MD, ME, NJ, Northern VA, NY, PA, RI, UT, VT | Ceramic, Fabric, Glass, Plastic, Rubber | 00000000 | 000000 |
Pliobond Adhesives | ||||||||||||||
| 20 | 1 oz. | Tube | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Glass, Metal, Plastic, Rubber | __ | Ceramic, Glass, Metal, Plastic, Rubber | 0000000 | 0000 |
High-Temperature Glue
This high-temperature glue sticks quickly, but can be repositioned for up to 2 hours before it begins to harden. Glue can be applied and allowed to dry, then reactivated with water when ready for bonding.
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Temp. Range, °F | Color | For Joining | Each | |
| 32 oz. | Bottle | 2 hrs. | 12 hrs. | Thick Liquid | -30° to 500° | Beige | Cardboard, Fabric, Glass, Metal, Wood | 000000 | 000000 |
| 1 gal. | Pail | 2 hrs. | 12 hrs. | Thick Liquid | -30° to 500° | Beige | Cardboard, Fabric, Glass, Metal, Wood | 000000 | 00000 |
Surface Fillers
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Devcon Metal Patch & Fill repairs worn, rusted, and corroded surfaces with less preparation.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Pkg. Qty. | Pkg. | |
Loctite® Fixmaster Epoxy | ||||||||||||||
| EA 445 | 0.1 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
| EA 445 | 1 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
| EA 9131 | 0.1 oz. | Mixer Cup | 90 | 24 hrs. | Thick Liquid | 1.5:1 | 1 sq. in. @ 1/4" | -65° to 180° | White | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 00000 |
| Each | ||||||||||||||
Devcon Metal Patch & Fill | ||||||||||||||
| S-50 | 3 oz. | Tube | 20 | 6 hrs. | Paste | __ | 6 sq. in. @ 1/4" | 40° to 400° | Gray | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic, Glass | __ | 00000000 | 0000 |
Conductive Surface Fillers for Electronics
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.
Surface fillers in one-time-use packets and jars come as two parts. The size listed is the combined total of the two parts.
Volume resistivity and surface resistivity measure how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Volume Resistivity, ohms-cm | Consistency | Mix Ratio | Temp. Range, °F | Color | For Use On | Each | |
Surface Fillers | ||||||||||||
| 0.1 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | Paste | 100:6 | -75° to 250° | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 0000000 | 000000 |
| 0.4 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | Paste | 100:6 | -75° to 250° | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 0000000 | 000000 |