PVC Plastic Cement | McMaster-Carr

Choose a Category

Clear All

	For Use On For Use On	Show

PVC Plastic

	For Use On For Use On	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	Container Type Container Type


Brush-Top Can	Can

Tube	Brush-Top Bottle

Bottle	Jug

Mixer Cup

	Color Color

	Clear		Gray
	Beige		Purple
	White		Amber
	Brown

	For Joining For Joining

	Type Type

Adhesive

Surface Filler

Primer

	Adhesive Type Adhesive Type

Cement

Contact

	For Maximum Pipe Diameter For Maximum Pipe Diameter

12"

	Clarity Clarity

Clear

Semi-Clear

Opaque

	Consistency Consistency

Thin Liquid

Thick Liquid

	Formulation Formulation

	Reaches Full Strength Reaches Full Strength

	Cure Type Cure Type

Room Temperature

	Manufacturer Manufacturer

	Manufacturer Model Number Manufacturer Model Number

	Begins to Harden Begins to Harden

	Maximum Temperature Maximum Temperature

Less than 250° F

250° to 999° F

Not Rated

	Minimum Temperature Minimum Temperature

	Specifications Met Specifications Met

ASTM

NSF/ANSI

Mil. Spec.

	Mixing Required Mixing Required

Yes

	Viscosity Viscosity

	Container Size Container Size

	Elongation Elongation

400%

Not Rated

	Peel Strength Peel Strength

View catalog pages (9)

Forward

How can we improve?

38 Products

About Structural Adhesives

Pipe Cement for Plastic Pipe

Create strong, leakproof joints between unthreaded pipe and fittings. Cleaner and primer (sold separately) are recommended to prepare pipe for adhesion.

Cement for CPVC plastic and for PVC plastic meets NSF/ANSI 61 safety standards for use on drinking water systems. It is also suitable for drain, waste, and vent pipes.

Cement for ABS, PVC, and CPVC plastic works on most plastic pipe, conduit, water lines, and drain, waste, and vent systems.

For PVC Plastic
For Max. Pipe Dia.	Begins to Harden	Reaches Full Strength	Consistency	Viscosity, cP	Temp. Range, °F	Color	Specifications Met		8 oz.	16 oz.	32 oz.
6"	60 sec.	24 hrs.	Thin Liquid	500	40° to 110°	Clear	ASTM D2564, NSF/ANSI 61	00000000	00000	000000	000000
12"	60 sec.	24 hrs.	Thick Liquid	1,600	40° to 110°	Clear	ASTM D2564, NSF/ANSI 61	00000000	0000	00000	00000
12"	60 sec.	24 hrs.	Thick Liquid	1,600	40° to 110°	Gray	ASTM D2564, NSF/ANSI 61	00000000	0000	00000	00000
For ABS, PVC, and CPVC Plastic
6"	60 sec.	24 hrs.	Thin Liquid	500	40° to 110°	Clear	__	00000000	0000	00000	00000

Cleaners and Primers for Pipe Cement

Cleaners
Color		8 oz.	16 oz.	32 oz.
Clear	00000000	00000	00000	000000
Primers
Clear	00000000	0000	00000	00
Purple	00000000	0000	00000	00000

Cement for Plastic

Form strong bonds on most plastics.

	Container
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Consistency	Viscosity, cP	Temp. Range	Color	For Joining		Each
SciGrip Cement
16	1.5 oz.	Tube	5 min.	21 days	Thin Liquid	800	Not Rated	Clear	Plastic, Rubber	0000000	00000
3	16 oz.	Can	60 sec.	7 days	Thin Liquid	Not Rated	Not Rated	Clear	Plastic, Rubber	0000000	00000
4052	16 oz.	Can	15 min.	7 days	Thin Liquid	500	Not Rated	Clear	Plastic	0000000	00000
4052	1 gal.	Can	15 min.	7 days	Thin Liquid	500	Not Rated	Clear	Plastic	0000000	000000

Contact Adhesives

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

4693 works on hard-to-bond plastics, such as polypropylene and polyethylene.

Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

	Container
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Consistency	Viscosity, cP	Temp. Range, °F	Color	For Joining	Cannot Be Sold To	For Joining		Each
3M Adhesives
826	32 oz.	Can	45 min.	72 hrs.	1,810	Thin Liquid	1,000	-10° to 230°	Amber	Plastic, Rubber	CT, DC, DE, Los Angeles Area, MA, MD, ME, NJ, Northern VA, NY, PA, RI, UT, VT	Plastic, Rubber	00000000	000000
1099	5 oz.	Tube	40 min.	72 hrs.	3,405	Thick Liquid	3,000	-10° to 230°	Beige	Fabric, Foam, Plastic, Rubber	__	Fabric, Foam, Plastic, Rubber	00000000	00000
1099	32 oz.	Can	40 min.	72 hrs.	3,405	Thick Liquid	3,000	-10° to 230°	Beige	Fabric, Foam, Plastic, Rubber	__	Fabric, Foam, Plastic, Rubber	00000000	00000
1099	1 gal.	Can	40 min.	72 hrs.	3,405	Thick Liquid	3,000	-10° to 230°	Beige	Fabric, Foam, Plastic, Rubber	__	Fabric, Foam, Plastic, Rubber	00000000	000000
2262	32 oz.	Can	10 min.	24 hrs.	Not Rated	Thin Liquid	525	-10° to 230°	Clear	Metal, Plastic, Rubber	__	Metal, Plastic, Rubber	00000000	00000
4475	32 oz.	Can	10 min.	72 hrs.	Not Rated	Thick Liquid	8,500	-10° to 230°	Clear	Ceramic, Fabric, Glass, Plastic, Rubber	CT, DC, DE, Los Angeles Area, MA, MD, ME, NJ, Northern VA, NY, PA, RI, UT, VT	Ceramic, Fabric, Glass, Plastic, Rubber	00000000	00000
4693	32 oz.	Can	60 min.	72 hrs.	Not Rated	Thin Liquid	225	-10° to 230°	Amber	Plastic, Rubber	CT, DC, DE, Los Angeles Area, MA, MD, ME, NJ, Northern VA, NY, PA, RI, UT, VT	Plastic, Rubber	00000000	00000
4693	1 gal.	Can	60 min.	72 hrs.	Not Rated	Thin Liquid	225	-10° to 230°	Amber	Plastic, Rubber	CT, DC, DE, Los Angeles Area, MA, MD, ME, NJ, Northern VA, NY, PA, RI, UT, VT	Plastic, Rubber	00000000	000000
Pliobond Adhesives
20	1 oz.	Tube	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Glass, Metal, Plastic, Rubber	__	Ceramic, Glass, Metal, Plastic, Rubber	0000000	0000
25	3 oz.	Brush-Top Bottle	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	__	Ceramic, Metal, Plastic, Rubber	0000000	0000
25	8 oz.	Brush-Top Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	__	Ceramic, Metal, Plastic, Rubber	0000000	00000
25	16 oz.	Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	__	Ceramic, Metal, Plastic, Rubber	0000000	00000
25	32 oz.	Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	Los Angeles Area	Ceramic, Metal, Plastic, Rubber	000000	00000
25	1 gal.	Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	Los Angeles Area	Ceramic, Metal, Plastic, Rubber	000000	000000
Weldwood Adhesives
__	3 oz.	Bottle	15 min.	72 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 150°	Beige	Composites, Plastic, Rubber, Wood	__	Composites, Plastic, Rubber, Wood	0000000	0000
__	16 oz.	Can	15 min.	72 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 180°	Beige	Composites, Plastic, Rubber, Wood	__	Composites, Plastic, Rubber, Wood	0000000	00000
Adhesives
__	4 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Fabric, Foam, Metal, Plastic, Rubber, Wood	__	Fabric, Foam, Metal, Plastic, Rubber, Wood	000000	00000
__	8 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Fabric, Foam, Metal, Plastic, Rubber, Wood	__	Fabric, Foam, Metal, Plastic, Rubber, Wood	000000	00000
__	16 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Fabric, Foam, Metal, Plastic, Rubber, Wood	__	Fabric, Foam, Metal, Plastic, Rubber, Wood	000000	00000
__	32 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Fabric, Foam, Metal, Plastic, Rubber, Wood	Los Angeles Area	Fabric, Foam, Metal, Plastic, Rubber, Wood	000000	00000
__	1 gal.	Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Fabric, Foam, Metal, Plastic, Rubber, Wood	Los Angeles Area	Fabric, Foam, Metal, Plastic, Rubber, Wood	000000	00000

Primers for Pipe Cement for Plastic Pipe

Prepare PVC and CPVC pipe for bonding.

Container Type	Drying Time, min.	Consistency	Viscosity, cP	Color	Specifications Met		8 oz.	16 oz.	32 oz.
Brush-Top Can	5	Thin Liquid	Not Rated	Clear	ASTM F656	00000000	00000	000000	00
Brush-Top Can	5	Thin Liquid	Not Rated	Purple	ASTM F656	00000000	0000	00000	000000

Surface Fillers

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On	Pkg. Qty.		Pkg.
Loctite® Fixmaster Epoxy
EA 445	0.1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 445	1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 9131	0.1 oz.	Mixer Cup	90	24 hrs.	Thick Liquid	1.5:1	1 sq. in. @ 1/4"	-65° to 180°	White	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	00000

Coolant-Resistant Surface Fillers

Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.

Container
Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Temp. Range, °F	Color	For Use On		Each
16	Jug	7	10	Thick Liquid	Not Rated to 500°	Brown	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Galvanized Steel, Galvanized Iron, Titanium, Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, PTFE Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	000000

Fuel-Resistant Surface Fillers

Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.

1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.

Container
Size, pt.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
1.5	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	000000
3	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	00000

Terms and Conditions and Privacy Policy