Form bonds in 5 seconds or less.

Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.

Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.

Bond glass and stone to drywall, treated lumber, and subfloors.

When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds.

The 3M VHB adhesive on these rolls offers a strong hold that can replace rivets, spot welds, and other permanent fasteners.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Also known as Torr Seal, this sealant forms a rigid bond that seals leaks on vacuum systems or components.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

The textured finish matches concrete surfaces.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Use cartridges with a standard caulk gun for quick and easy dispensing.