For Shaft Type For Shaft Type |
|---|
 |  |
| Round | Round with Support Rail |
Linear Bearing Component Linear Bearing Component |
|---|
 |  |
| Bearing | Bearing in Housing |
Housing Type Housing Type |
|---|
|  |
| Base Mount | Flange Mount |
For Shaft Material For Shaft Material |
|---|
|
Alignment Style Alignment Style |
|---|
|
Overall Length Overall Length |
|---|
|
|
|
Dynamic Load Capacity Dynamic Load Capacity |
|---|
Static Load Capacity Static Load Capacity |
|---|
|
|
For Shaft Smoothness For Shaft Smoothness |
|---|
|
For Minimum Steel Shaft Hardness For Minimum SteelShaft Hardness |
|---|
|
For Minimum Stainless Steel Shaft Hardness For Minimum StainlessSteel Shaft Hardness |
|---|
|
Overall Height Overall Height |
|---|
|
|
|
Mounting Holes Center-to-Center, Length Mounting Holes Center-to-Center, Length |
|---|
|
|
|
About Linear Bearings
More
High-Speed Linear Sleeve Bearings
A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible. Bearings are for use with round end-supported shafts. They have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).
For technical drawings and 3-D models, click on a part number.
Bearings | External Retaining Rings | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Overall Lg. | For Housing ID | Retaining Ring Groove End-to-End Lg. | Dynamic Load Capacity | Static Load Capacity, lbs. | Shaft Clearance | Temperature Range, ° F | For Shaft Material | Each | Each | ||
Fixed Alignment | ||||||||||||
Ceramic-Lined 6061 Aluminum Bearings | ||||||||||||
| 1/4" | 3/4" | 0.5000" - 0.5005" | 0.517" | 70 lbs. @ 100 fpm | 935 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 00000 |
| 3/8" | 7/8" | 0.6250" - 0.6255" | 0.642" | 100 lbs. @ 100 fpm | 1,600 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 0000 | 0000000 | 000 |
| 1/2" | 1 1/4" | 0.8750" - 0.8755" | 0.969" | 250 lbs. @ 100 fpm | 3,100 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 5/8" | 1 1/2" | 1.1250" - 1.1255" | 1.116" | 350 lbs. @ 100 fpm | 4,600 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 3/4" | 1 5/8" | 1.2500" - 1.2505" | 1.178" | 450 lbs. @ 100 fpm | 6,100 | 0.0008" | -200° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 1" | 1 5/8" | 1.2500" - 1.2505" | 1.178" | 600 lbs. @ 100 fpm | 8,100 | 0.0008" | -200° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
High-Speed Flange-Mounted Linear Sleeve Bearings
A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible. The flange-mount design is good for vertical linear motion applications. Bearings are for use with round end-supported shafts and are self-aligning to compensate for shaft misalignment. End seals keep contaminants out.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Lg. | Wd. | Ht. | Flange Thick. | Bolt Circle Dia. | OD | Dynamic Load Capacity | Static Load Capacity, lbs. | Shaft Clearance | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 2° Misalignment Capability | |||||||||||||||
Ceramic-Lined 6061 Aluminum Bearings with 6061 Aluminum Housing | |||||||||||||||
| 3/8" | 1 5/16" | 1 1/4" | 1 1/4" | 3/16" | 1 27/32" | 7/8" | 150 lbs. @ 100 fpm | 1,600 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 5/32" | 0000000 | 000000 |
| 1/2" | 1 11/16" | 1 5/8" | 1 5/8" | 1/4" | 2 3/8" | 1 1/4" | 300 lbs. @ 100 fpm | 3,100 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 3/16" | 0000000 | 00000 |
| 3/4" | 2 1/16" | 2 3/8" | 2 3/8" | 3/8" | 2 29/32" | 1 3/4" | 600 lbs. @ 100 fpm | 6,100 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 7/32" | 0000000 | 00000 |
| 1" | 2 13/16" | 2 3/4" | 2 3/4" | 1/2" | 3 31/32" | 2 1/4" | 1,000 lbs. @ 100 fpm | 11,000 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 9/32" | 0000000 | 00000 |
| 1 1/4" | 3 5/8" | 3" | 3" | 1/2" | 5 1/8" | 2 1/2" | 1,500 lbs. @ 100 fpm | 16,000 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 9/32" | 0000000 | 000000 |
High-Speed Mounted Linear Sleeve Bearings
A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible. Bearings are for use with round end-supported shafts. They are self-aligning to compensate for shaft misalignment and have end seals to keep lubricant in and dirt out. Note: Not for use with ceramic-coated aluminum or 300 series stainless steel shafts.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Lg. | Wd. | Ht. | Center Ht. | Dynamic Load Capacity | Static Load Capacity, lbs. | Shaft Clearance | Temperature Range, °F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 2° Misalignment Capability | |||||||||||||
Ceramic-Lined 6061 Aluminum Bearings with 6061 Aluminum Housing | |||||||||||||
| 1/4" | 1 3/16" | 1 5/8" | 13/16" | 7/16" | 100 lbs. @ 100 fpm | 935 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 1/8" | 0000000 | 000000 |
| 3/8" | 1 5/16" | 1 3/4" | 15/16" | 1/2" | 150 lbs. @ 100 fpm | 1,600 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 1/8" | 0000000 | 00000 |
| 1/2" | 1 11/16" | 2" | 1 1/4" | 11/16" | 300 lbs. @ 100 fpm | 3,100 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 1/8" | 0000000 | 00000 |
| 5/8" | 1 15/16" | 2 1/2" | 1 5/8" | 7/8" | 450 lbs. @ 100 fpm | 4,600 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 3/16" | 0000000 | 00000 |
| 3/4" | 2 1/16" | 2 3/4" | 1 3/4" | 15/16" | 600 lbs. @ 100 fpm | 6,100 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 3/16" | 0000000 | 00000 |
| 1" | 2 13/16" | 3 1/4" | 2 3/16" | 1 3/16" | 1,000 lbs. @ 100 fpm | 11,000 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 3/16" | 0000000 | 00000 |
| 1 1/4" | 3 5/8" | 4" | 2 13/16" | 1 1/2" | 1,500 lbs. @ 100 fpm | 16,000 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 3/16" | 0000000 | 000000 |
| 1 1/2" | 4" | 4 3/4" | 3 1/4" | 1 3/4" | 2,000 lbs. @ 100 fpm | 22,000 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 1/4" | 0000000 | 000000 |
| 2" | 5" | 6" | 4 1/16" | 2 1/8" | 4,000 lbs. @ 100 fpm | 40,000 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 3/8" | 0000000 | 000000 |
High-Speed Mounted Linear Sleeve
Bearings for Support Rail Shafts
A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible. Bearings are self-aligning to compensate for shaft misalignment. Mount them on a support rail shaft for applications requiring maximum rigidity. End seals keep contaminants out. Note: Not for use with ceramic-coated aluminum or 300 series stainless steel shafts.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Lg. | Wd. | Ht. | Center Ht. | Wd. | Dynamic Load Capacity | Static Load Capacity, lbs. | Shaft Clearance | Temperature Range, °F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 2° Misalignment Capability | ||||||||||||||
Ceramic-Lined 6061 Aluminum Bearings with 6061 Aluminum Housing | ||||||||||||||
| 1/4" | 1 3/16" | 1 5/8" | 13/16" | 7/16" | 1/8" | 100 lbs. @ 100 fpm | 935 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 1/8" | 0000000 | 000000 |
| 3/8" | 1 5/16" | 1 3/4" | 15/16" | 1/2" | 1/8" | 150 lbs. @ 100 fpm | 1,600 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 1/8" | 0000000 | 00000 |
| 1/2" | 1 11/16" | 2" | 1 1/4" | 11/16" | 5/16" | 300 lbs. @ 100 fpm | 3,100 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 1/8" | 0000000 | 00000 |
| 5/8" | 1 15/16" | 2 1/2" | 1 5/8" | 7/8" | 3/8" | 450 lbs. @ 100 fpm | 4,600 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 3/16" | 0000000 | 00000 |
| 3/4" | 2 1/16" | 2 3/4" | 1 3/4" | 15/16" | 7/16" | 600 lbs. @ 100 fpm | 6,100 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 3/16" | 0000000 | 00000 |
| 1" | 2 13/16" | 3 1/4" | 2 3/16" | 1 3/16" | 9/16" | 1,000 lbs. @ 100 fpm | 11,000 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 3/16" | 0000000 | 000000 |
| 1 1/4" | 3 5/8" | 4" | 2 13/16" | 1 1/2" | 5/8" | 1,500 lbs. @ 100 fpm | 16,000 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 3/16" | 0000000 | 000000 |
| 1 1/2" | 4" | 4 3/4" | 3 1/4" | 1 3/4" | 3/4" | 2,000 lbs. @ 100 fpm | 22,000 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 1/4" | 0000000 | 000000 |
| 2" | 5" | 6" | 4 1/16" | 2 1/8" | 1" | 4,000 lbs. @ 100 fpm | 40,000 | 0.0005" to 0.0006" | -200° to 400° | Aluminum, Steel | 4 | 3/8" | 0000000 | 000000 |