Also known as brushable ceramic, these coatings create a hard, low-friction surface. They're often used on liquid processing equipment to protect worn areas and reduce turbulence.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

No mixing required—these potting compounds come ready to apply.

Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.

Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application.

Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.

Refinish porcelain sinks, tubs, and tile and give laminates a high-gloss finish.

Enhance, renew, and protect surfaces.

These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring.

Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. These lubricants dry to form a nonstick film that won’t attract dust. They are often used on hinges, gears, and roller chain.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

Even when used under water, these adhesives maintain their strength.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

Bond glass and stone to drywall, treated lumber, and subfloors.

When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds.

This cement has excellent temperature resistance for sealing insulation joints on ovens and furnaces.

Temporarily stabilize objects on flat surfaces with this clear, reusable adhesive.

These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.

Also known as Gorilla Glue, this glue expands to form stronger bonds than other glue.

Form bonds in 5 seconds or less.

This glue remains flexible after curing to accommodate joint movement.

An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.