Search Results
Shape Shape |
|---|
 |  |
| Rod and Disc | Round Tube |
Diameter Diameter |
|---|
|
|
|
Material Material |
|---|
|
OD OD |
|---|
|
|
|
ID ID |
|---|
|
|
|
Compressive Strength Compressive Strength |
|---|
|
|
Fabrication Fabrication |
|---|
|
Flexural Strength Flexural Strength |
|---|
|
|
Tensile Strength Tensile Strength |
|---|
|
Hardness Hardness |
|---|
|
Wall Thickness Wall Thickness |
|---|
|
|
|
Thermal Conductivity Thermal Conductivity |
|---|
|
Nonporous Alumina Ceramic Rods and Discs
- Color: White
- Max. Temperature: 3075° F
- Fabrication: Fired
- Porosity: 0%
- Compressive Strength: 300,000 psi
Seal out air and gas in high-temperature and high-wear applications. This ultrahard ceramic can also be used in applications that require superior strength.
Rods
12" Lg. | |||
|---|---|---|---|
| Dia. | Dia. Tolerance | Each | |
| 1/16" | -0.003" to 0.003" | 00000000 | 000000 |
| 1/8" | -0.004" to 0.004" | 00000000 | 00000 |
| 3/16" | -0.006" to 0.006" | 00000000 | 00000 |
| 13/64" | -0.006" to 0.000" | 00000000 | 00000 |
| 1/4" | -0.008" to 0.008" | 00000000 | 00000 |
| 5/16" | -0.009" to 0.009" | 00000000 | 00000 |
| 3/8" | -0.011" to 0.011" | 00000000 | 00000 |
| 1/2" | -0.015" to 0.015" | 00000000 | 00000 |
| 5/8" | -0.019" to 0.019" | 00000000 | 00000 |
| 3/4" | -0.023" to 0.023" | 00000000 | 00000 |
Nonporous Alumina Ceramic Tubes
- Color: White
- Max. Temperature: 3075° F
- Fabrication: Fired
- Porosity: 0%
- Compressive Strength: 300,000 psi
Seal out air and gas in high-temperature and high-wear applications. This ultrahard ceramic can also be used in applications that require superior strength.
| OD | ID | Wall Thick. | Each | |
6" Lg. | ||||
|---|---|---|---|---|
| 0.050" | 0.020" | 0.015" | 00000000 | 000000 |
| 0.063" | 0.031" | 0.016" | 00000000 | 00000 |
| 0.094" | 0.040" | 0.027" | 00000000 | 00000 |
| 0.094" | 0.063" | 0.016" | 00000000 | 0000 |
| 0.100" | 0.050" | 0.025" | 00000000 | 0000 |
| 1/8" | 0.063" | 0.031" | 00000000 | 0000 |
| 0.156" | 0.094" | 0.031" | 00000000 | 0000 |
| 0.187" | 0.094" | 0.047" | 00000000 | 0000 |
| 0.187" | 1/8" | 0.032" | 00000000 | 0000 |
| 0.219" | 0.156" | 0.031" | 0000000 | 0000 |
| 1/4" | 1/8" | 0.063" | 00000000 | 0000 |
| 1/4" | 0.156" | 0.047" | 00000000 | 0000 |
| 1/4" | 0.188" | 0.031" | 00000000 | 0000 |
| 0.313" | 0.188" | 0.063" | 00000000 | 00000 |
| 0.313" | 0.219" | 0.047" | 00000000 | 00000 |
| 3/8" | 1/4" | 0.063" | 00000000 | 00000 |
| 0.438" | 0.313" | 0.063" | 00000000 | 00000 |
| 1/2" | 1/4" | 0.125" | 00000000 | 00000 |
| 1/2" | 3/8" | 0.063" | 00000000 | 00000 |
| 0.590" | 0.394" | 0.098" | 0000000 | 00000 |
| 0.590" | 0.433" | 0.078" | 00000000 | 00000 |
| 5/8" | 1/2" | 0.063" | 00000000 | 00000 |
| 0.688" | 1/2" | 0.094" | 00000000 | 00000 |
| 3/4" | 1/2" | 0.125" | 00000000 | 00000 |
| 3/4" | 0.563" | 0.094" | 00000000 | 00000 |
| 7/8" | 5/8" | 0.125" | 00000000 | 00000 |
| 1" | 3/4" | 0.125" | 00000000 | 00000 |
12" Lg. | ||||
| 0.050" | 0.020" | 0.015" | 00000000 | 00000 |
| 0.063" | 0.031" | 0.016" | 00000000 | 00000 |
| 0.094" | 0.040" | 0.027" | 00000000 | 00000 |
| 0.094" | 0.063" | 0.016" | 00000000 | 00000 |
| 0.100" | 0.050" | 0.025" | 00000000 | 00000 |
| 1/8" | 0.063" | 0.031" | 0000000 | 00000 |
| 0.156" | 0.094" | 0.031" | 0000000 | 00000 |
| 0.187" | 0.094" | 0.047" | 0000000 | 00000 |
| 0.187" | 1/8" | 0.032" | 0000000 | 00000 |
| 0.219" | 0.156" | 0.031" | 00000000 | 00000 |
| 1/4" | 1/8" | 0.063" | 0000000 | 00000 |
| 1/4" | 0.156" | 0.047" | 0000000 | 00000 |
| 1/4" | 0.188" | 0.031" | 0000000 | 00000 |
| 0.313" | 0.188" | 0.063" | 00000000 | 00000 |
| 0.313" | 0.219" | 0.047" | 00000000 | 00000 |
| 3/8" | 1/4" | 0.063" | 0000000 | 00000 |
| 0.438" | 0.313" | 0.063" | 00000000 | 00000 |
| 1/2" | 1/4" | 0.125" | 0000000 | 00000 |
| 1/2" | 3/8" | 0.063" | 0000000 | 00000 |
| 0.590" | 0.394" | 0.098" | 0000000 | 00000 |
| 0.590" | 0.433" | 0.078" | 00000000 | 00000 |
| 5/8" | 1/2" | 0.063" | 0000000 | 00000 |
| 0.688" | 1/2" | 0.094" | 00000000 | 00000 |
| 3/4" | 1/2" | 0.125" | 0000000 | 00000 |
| 3/4" | 0.563" | 0.094" | 00000000 | 00000 |
| 7/8" | 5/8" | 0.125" | 00000000 | 00000 |
| 1" | 3/4" | 0.125" | 00000000 | 000000 |
24" Lg. | ||||
| 0.050" | 0.020" | 0.015" | 00000000 | 00000 |
| 0.063" | 0.031" | 0.016" | 00000000 | 00000 |
| 0.094" | 0.040" | 0.027" | 00000000 | 00000 |
| 0.094" | 0.063" | 0.016" | 00000000 | 00000 |
| 0.100" | 0.050" | 0.025" | 00000000 | 00000 |
| 1/8" | 0.063" | 0.031" | 00000000 | 00000 |
| 0.156" | 0.094" | 0.031" | 00000000 | 00000 |
| 0.187" | 0.094" | 0.047" | 00000000 | 00000 |
| 0.187" | 1/8" | 0.032" | 00000000 | 00000 |
| 0.219" | 0.156" | 0.031" | 00000000 | 00000 |
| 1/4" | 1/8" | 0.063" | 00000000 | 00000 |
| 1/4" | 0.156" | 0.047" | 00000000 | 00000 |
| 1/4" | 0.188" | 0.031" | 00000000 | 00000 |
| 0.313" | 0.188" | 0.063" | 00000000 | 00000 |
| 0.313" | 0.219" | 0.047" | 00000000 | 00000 |
| 3/8" | 1/4" | 0.063" | 00000000 | 00000 |
| 0.438" | 0.313" | 0.063" | 00000000 | 00000 |
| 1/2" | 1/4" | 0.125" | 00000000 | 00000 |
| 1/2" | 3/8" | 0.063" | 00000000 | 00000 |
| 0.590" | 0.394" | 0.098" | 00000000 | 00000 |
| 0.590" | 0.433" | 0.078" | 00000000 | 00000 |
| 5/8" | 1/2" | 0.063" | 00000000 | 00000 |
| 0.688" | 1/2" | 0.094" | 00000000 | 00000 |
| 3/4" | 1/2" | 0.125" | 00000000 | 00000 |
| 3/4" | 0.563" | 0.094" | 00000000 | 000000 |
| 7/8" | 5/8" | 0.125" | 00000000 | 000000 |
| 1" | 3/4" | 0.125" | 00000000 | 000000 |
Nonporous Alumina Ceramic Multiple-Bore Tubes
Two Bores
Four Bores
- Color: White
- Max. Temperature: 3075° F
- Fabrication: Fired
- Porosity: 0%
- Compressive Strength: 300,000 psi
Seal out air and gas in high-temperature and high-wear applications. This ultrahard ceramic can also be used in applications that require superior strength.
Tight-Tolerance Nonporous Alumina Ceramic Rods
- Color: White
- Max. Temperature: 3075° F
- Fabrication: Fired
- Porosity: 0%
- Compressive Strength: 300,000 psi
Seal out air and gas in high-temperature and high-wear applications. This ultrahard ceramic can also be used in applications that require superior strength.
Ultra-High-Temperature
Easy-to-Machine Alumina Ceramic Rods
- Color: White
- Max. Temperature: 3000° F
- Fabrication: Fired
- Porosity: 48%
- Compressive Strength: 4,350 psi
Commonly used in induction furnace components and hot glass handling, this alumina ceramic withstands higher temperatures than alumina-bisque ceramic. The 99% alumina content makes it suitable for high-vacuum applications. It has excellent machinability. Material comes fired and is unaffected by water.
Low Thermal Expansion Alumina-Silicate Ceramic Rods
- Color: Gray
- Max. Temperature: 2010° F
- Fabrication: Unfired
- Porosity: 2%
- Compressive Strength: 25,000 psi
Also known as lava and wonderstone, this material is often used in applications that require high temperature resistance and low thermal expansion, such as standoffs and welding jigs.
| Dia. | Dia. Tolerance | Lg. | Each | |
| 1/8" | 0.000" to 0.015" | 3" | 0000000 | 000000 |
| 1/4" | 0.000" to 0.015" | 3" | 0000000 | 0000 |
| 3/8" | 0.000" to 0.015" | 6" | 0000000 | 00000 |
| 1/2" | 0.000" to 0.015" | 6" | 0000000 | 00000 |
| 5/8" | 0.000" to 0.015" | 6" | 0000000 | 00000 |
| 3/4" | 0.000" to 0.015" | 9 1/2" | 0000000 | 00000 |
| 7/8" | 0.000" to 0.015" | 9 1/2" | 0000000 | 00000 |
| 1" | 0.000" to 0.015" | 9 1/2" | 0000000 | 00000 |
| 1 1/4" | 0.000" to 0.015" | 9 1/2" | 0000000 | 00000 |
| 1 1/2" | 0.000" to 0.015" | 9 1/2" | 0000000 | 00000 |
| 2" | 0.000" to 0.015" | 9 1/2" | 0000000 | 000000 |
| 2 1/2" | 0.000" to 0.015" | 9 1/2" | 0000000 | 000000 |
| 3" | 0.000" to 0.015" | 9 1/2" | 0000000 | 000000 |
| 3 1/2" | 0.000" to 0.015" | 9 1/2" | 0000000 | 000000 |
| 4" | 0.000" to 0.015" | 9 1/2" | 00000000 | 000000 |
| 5" | 0.000" to 0.015" | 9 1/2" | 0000000 | 000000 |
Easy-to-Machine Alumina-Bisque Ceramic Rods
- Color: White
- Max. Temperature: 2475° F
- Fabrication: Semi-Fired
- Porosity: 36%
- Compressive Strength: 9,000 psi
Often used to create prototype components, this temperature-resistant ceramic comes semi-fired so it can be machined using conventional metalworking tools. Fire it to create a denser, harder material with increased electrical and mechanical properties.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Lg. | Shrinkage After Firing | Each | |
| 1/4" | 0.000" to 0.063" | 12" | 15% | 0000000 | 000000 |
| 1/2" | 0.000" to 0.063" | 6" | 15% | 0000000 | 00000 |
| 1/2" | 0.000" to 0.063" | 12" | 15% | 0000000 | 00000 |
| 3/4" | 0.000" to 0.063" | 12" | 15% | 0000000 | 000000 |
| 1" | 0.000" to 0.063" | 12" | 15% | 0000000 | 000000 |
| 1 1/2" | 0.000" to 0.125" | 12" | 15% | 0000000 | 000000 |
| 2" | 0.000" to 0.125" | 12" | 15% | 0000000 | 000000 |
| 2 1/2" | 0.000" to 0.125" | 12" | 15% | 0000000 | 000000 |
| 3" | 0.000" to 0.125" | 12" | 15% | 0000000 | 000000 |