Typically used in ovens and furnaces, these are the most efficient of our rigid high-temperature insulation sheets. Please note that they require special care when installing since the crumbly material is difficult to work with and will crack easily. Sheets lose strength over time and are intended to be installed behind another facing or insulation material. They resist damage from fire and moisture. Insulation performs best at temperatures above 1000° F.

Thinner than most rigid insulation for furnaces and other high-heat applications, these millboard sheets are also used for gasket fabrication. Insulation performs best at temperatures above 1000° F.

Wet these rigid sheets and they become formable. They can be molded multiple times until exposed to heat, which causes them to become rigid again. Insulation performs best at temperatures above 1000° F.

Designed for fluctuating, high-temperature applications, these semi-rigid sheets are typically used in furnaces and fire protection applications. They experience very little shrinkage at high temperatures, but the brittle material can be somewhat difficult to work with. Insulation is flame resistant, meeting ASTM E84 0/0 for flame and smoke. It performs best at temperatures above 1000° F.

Sheet with binder is easier to handle at room temperature than sheet without a binder, but it contains a small amount of organic material that burns off and releases smoke at around 400° F.

Sheet without binder won't produce smoke when heated.