The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

Create fast connections with items, such as rope, chain, and straps.

Lock the bolt with wire or a cable tie for a secure connection.

A wide opening accepts large diameters of rope and pipe. Squeeze the trigger to release.

With a narrow opening and contoured sides, these securely hold a single link of chain to prevent overtightening when lifting a load.

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the eye end.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

These rotate for easy positioning before a load is applied. They have a latch to ensure rope, chain, and fittings won't separate from the hook when the load slackens.

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

To open, lift and twist the latch 90°.

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

For a more secure connection than standard hooks, these clevis hooks have a latch that locks closed when a load is applied.

These have a latch that locks closed when a load is applied for a more secure connection than standard hooks. They rotate for easy positioning before a load is applied.

A ball-bearing swivel allows these to rotate under load. Attach to chain by inserting the included pin through a link.

Screw these hooks into place and secure with the included nut.

The latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Often used in binding and tie-down applications, these securely hold a single link of chain.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the clevis end.

Cut your own threads or weld the shank in place.

Use these kits with hooks that doin't have a pinhole.

One side is closed and the other is open.

These hooks have closed ends on both sides.

For extra security, these have a latch that snaps back into place to secure your load.These have excellent resistance to salt water and chemicals.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

The snap and split ring swing freely and pull from the center for easy alignment.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.