Made of treated steel, these links offer increased corrosion resistance over steel attachment links.

Roller chain links engage with matched sprocket teeth to transmit power between rotating shafts.

This treated steel chain has over eight times the capacity of stainless steel chain.

Made of 316 stainless steel, this is our most corrosion-resistant chain.

This self-lubricating nickel-plated steel chain has better corrosion resistance than steel chain and does not require regular maintenance.

A rubber ring seals grease between the bushings and pins and keeps out dust and other contaminants.

This treated steel chain has over six times the capacity of stainless steel chain.

Made of stainless steel, this chain has excellent corrosion resistance.

Also known as side bow chain, this chain has extra clearance between components for flexing from side to side on systems with curved tracks and sprockets that aren’t exactly aligned.

Keep an assortment of extra steel links on hand for maintenance and repairs. Assortments include connecting, adding, and adding-and-connecting links.

Made of stainless steel, this chain has excellent corrosion resistance.

This chain is made of steel.

Once secured with the included locking pin, these links must be cut off to be removed.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Smaller than lifting oblong links, these links provide room for snaps, carabiners, and other non-lifting connectors.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

The pins have flush ends to prevent snagging and accidental disengagement.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

For use in low-vibration applications where the shackle remains stationary.

A lip on the shackle keeps the pin from falling out when loosened.

Indentations in the shackle body hold the head of the pin in place once fastened.

A lip on the shackle keeps the pin from falling out when loosened.

Pull the collar to release the shackle from its locked position.

Attach a rope to the ring on the pin for remote release where access in limited. These shackes have a clevis end for making pivoting connections.

To open, lift and twist the latch 90°.

Lock by screwing the latch into the body.

Create fast connections with items, such as rope, chain, and straps.

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

A wide opening accepts large diameters of rope and pipe. Squeeze the trigger to release.

Lock the bolt with wire or a cable tie for a secure connection.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

The snap and split ring swing freely and pull from the center for easy alignment.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

Join, organize, and suspend objects with these S-hooks.

One side is closed and the other is open.

These hooks have closed ends on both sides.

Use these S-hooks for lifting applications.

Thread chain through the hole of these links to form an adjustable loop or connect chain ends to form a longer chain.

Use these links to connect the ends of chain to form a longer chain or create a loop for key chains and ID tags.