The wide end of these links has more room for attachments than standard figure-eight links.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.

Use these links for general lifting applications.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

With a narrow opening and contoured sides, these securely hold a single link of chain to prevent overtightening when lifting a load.

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the eye end.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

These hooks swivel under load. They have a latch locks closed when a load is applied for a more secure connection than standard hooks.

These have a latch that locks closed when a load is applied for a more secure connection than standard hooks. They rotate for easy positioning before a load is applied.

These rotate for easy positioning before a load is applied.

Screw these hooks into place and secure with the included nut.

Often used in binding and tie-down applications, these securely hold a single link of chain.

These swivel hooks have a latch that ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the clevis end.

An unthreaded shank allows you to cut your own threads.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

One end has a bolt fastened with a nut and cotter pin for a more secure connection than flush-pin connectors.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

For use in low-vibration applications where the shackle remains stationary.

Indentations in the shackle body hold the head of the pin in place once fastened.

Minimize twisting and knotting of rope and chain.

A lip on the shackle keeps the pin from falling out when loosened.

Attach a rope to the ring on the pin for remote release where access in limited. These shackes have a clevis end for making pivoting connections.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Lock by screwing the latch into the body.

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

These snaps have an eye that rotates for easy positioning.

Squeeze the trigger to quickly release the latch.

The force of the load helps keep the arms closed. Press the trigger for quick connection and disconnection.

Lock the bolt with wire or a cable tie for a secure connection.

The spring-loaded latches on these hooks snap back into place, securing your load.

These hooks have closed ends on both sides.

These hooks meet MS-87006.

Use these S-hooks for lifting applications.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Rotating for easy positioning before a load is applied, these minimize twisting and knotting of rope and chain.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

Mount these links in a drilled hole to secure small items such as pens. Links can also be attached as the end of a pull chain.

Use these links to connect the ends of chain to form a longer chain or create a loop for key chains and ID tags.

Also known as ball chain, use this chain to keep tools with machines, keys with chucks, and gas and dust caps with tanks.