This lock has a cinching collar that allows you to tighten and loosen the cable around equipment. Choose these locks if you need locks that each open with a different key.

The body is weather-resistant aluminum. The cable has a vinyl coating to prevent scratches and add weather resistance.

Similar to cable locks, except this lock has a cinching collar that allows you to tighten and loosen the cable around equipment. Choose this lock if you need several locks that open with the same key.

The body is weather-resistant aluminum. The cable has a vinyl coating to prevent scratches and add weather resistance.

Pull the chain-grip to unlatch hard-to-reach doors and panels. Bolts are spring-loaded to stay latched until you activate the pull. All latches have bolts that can be rotated 180°, so they can be used with both push and pull doors. They are reversible for right- and left-hand mounting.

For technical drawings and 3-D models, click on a part number.

Operate latches around corners and other obstructions—a flexible cable connects the latch to the handle, lever, or push button. Maximum cumulative bend is the combination of individual bend angles the cable can withstand.

Zinc-plated steel latches are mildly corrosion resistant.

Black zinc-plated brass latches have good corrosion resistance, so they’re often used in marine environments.

Pull on T-handle or lever releases to retract the spring-loaded latch bolt.

Push paddle-handle or push-button releases to retract the spring-loaded latch bolt.

For technical drawings and 3-D models, click on a part number.

Also known as rotary latches, these compensate for door misalignment when closing and then firmly grip the strike bolt for a secure hold. Operate the latches around corners and other obstructions—a flexible cable connects the latch and the handle. Maximum cumulative bend is the combination of individual bend angles the cable can withstand.

For T-handle release latches, pull on the handle to retract the spring-loaded latch.

For push-button release latches, push the button to retract the spring-loaded latch.

For technical drawings and 3-D models, click on a part number.

Maintain security by keeping your door latched as you open it up to 3".

After locking, pull the cable tight for a secure fit. This flexible cable wraps around and through panel boxes, freestanding equipment, and multiple gate valves to keep them inoperable. It includes write-on labels and is plastic coated so it won't mar surfaces. It helps you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

Thread the free end of the cable through the looped end and into the lockout clamping hole; pull tight and close handle to pinch the cable for a secure fit. These flexible cables wrap around and through panel boxes, freestanding equipment, and multiple gate valves to keep them inoperable. All are nylon coated so they won't mar surfaces. They help you comply with OSHA 1910.147 procedures for the control of energy sources that could injure workers.

For technical drawings and 3-D models, click on a part number.

Sets contain items for group electrical and valve lockouts and are furnished in a yellow plastic case that mounts to the wall to keep the items organized in a central location. The padlocks, hasps, and lockouts are red. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

Sets contain items for group electrical and valve lockouts and are furnished in a yellow plastic case that mounts to the wall to keep the items organized in a central location. The padlocks, hasps, and lockouts are red. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

Securely tie down items and lock up tools. Chain is case-hardened for cut and wear resistance.

Zinc-plated steel chain has good corrosion resistance.

For maximum security, square links are more difficult to cut with bolt cutters than round links. Chain is case-hardened for cut and wear resistance. Use it to securely tie down items and lock up tools.

Push these tags through hasps on cabinets, truck trailers, cargo containers, and other heavy duty equipment. A plastic coating provides corrosion resistance, but scratches easily. Cable or bolt cutters are required for removal. Tags are stamped with one letter and six random numbers. To install, snap apart the plastic attachment holding the bolt and lock together, then insert the bolt into the lock. Not offered blank for security reasons. Tags meet U.S. International Customs C-TPAT (Customs-Trade Partnership Against Terrorism) standards for high security seals.

Specify a message (up to eight characters, including spaces) and a starting number (up to six digits). The loose end of the wire rope inserts into the lock for a fixed, secure loop. Use these tags on valves, controls, containers, and other small devices. Cable or bolt cutters are required for removal. Not offered in blank for security reasons. Tags meet U.S. International Customs C-TPAT (Customs-Trade Partnership Against Terrorism) standards for high security seals.

Insert the loose end of the wire rope into the lock for a fixed, secure loop. Use these tags on valves, controls, containers, and other small devices. Cable or bolt cutters are required for removal. Tags are stamped with "SEALED" and a random number. Not offered blank for security reasons. Tags meet U.S. International Customs C-TPAT (Customs-Trade Partnership Against Terrorism) standards for high security seals.

Specify a message (up to six characters, including spaces) and a starting number (up to six digits). Insert the free end of the wire rope into the lock and pull tight to cinch them to the size you need. Use them on valves, controls, containers, and other small devices. Cable or bolt cutters are required for removal. Not offered blank for security reasons.

Tags with an average breaking strength of 2,250 lbs. meet U.S. International Customs C-TPAT (Customs-Trade Partnership Against Terrorism) standards for high security seals.

Insert the free end of the wire rope into the lock and pull tight to cinch these tags to the size you need. Use these tags on valves, controls, containers, and other small devices. Cable or bolt cutters are required for removal. Tags are stamped with "SEALED" and a random number. Not offered blank for security reasons.

Tags with an average breaking strength of 2,250 lbs. and 4,500 lbs. meet U.S. International Customs C-TPAT (Customs-Trade Partnership Against Terrorism) standards for high security seals.