Container Type Container Type |
|---|
 |  |
| Aerosol Can | Caulk Gun Cartridge |
 |  |
| Tube | Grease Gun Cartridge |
For Use On For Use On |
|---|
|
|
Lubricant Type Lubricant Type |
|---|
|
Trade Name Trade Name |
|---|
|
Base Oil Base Oil |
|---|
|
Melting Temperature Melting Temperature |
|---|
|
Specifications Met Specifications Met |
|---|
|
About Lubricants
More
About Grease
More
Penetrating Lubricants for Chain
For use with roller chain and other moving metal parts, these thin lubricants cut through dirt, grease, and rust, withstand heavy loads, and resist wear.
Lubricants with moly (molybdenum disulfide) withstand high loads and have excellent wear resistance. Lubricants with PTFE provide long-lasting lubrication.
DuPont Teflon® Chain-Saver penetrates into roller chain links and pins while wet—below 120° F it acts as a dry lubricant that won’t attract dust or dirt; above 120° F it acts as a wet lubricant.
Open Gear and Chain Grease
Tackier than gear box grease, this grease sticks to open gears and roller chain. It resists moisture for corrosion protection and can lubricate under heavy loads.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and withstands a wider range of temperatures.
Grease with PTFE thickener has good heat, moisture, and oxidation resistance.
Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Chemours Krytox™ GPL 215 withstands high loads and pressure. It handles extreme temperature swings, resists aggressive chemicals, such as acids and oxygen, and is long lasting with an indefinite shelf life.
Container | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
Chemours Krytox™ GPL 215—PTFE Thickener | |||||||||
| 2 | Synthetic | Moly | 0.5 oz. | Tube | -30° to 400° | Nonmelting | Black | 00000000 | 000000 |
| 2 | Synthetic | Moly | 2 oz. | Tube | -30° to 400° | Nonmelting | Black | 00000000 | 00000 |
| 2 | Synthetic | Moly | 8 oz. | Tube | -30° to 400° | Nonmelting | Black | 00000000 | 000000 |
| 2 | Synthetic | Moly | 14 oz. | Grease Gun Cartridge | -30° to 400° | Not Rated | Black | 00000000 | 000000 |
Food Industry Open Gear and Chain Grease
For use in food-processing and preparation areas, this grease is NSF registered H1 or meets FDA Compliant 21 CFR 178.3570 for incidental contact with food. It's tacky to stick to open gears and roller chain.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 3 is about the consistency of vegetable shortening.Semisynthetic-oil-based grease, a blend of mineral and synthetic oils, has longer-lasting performance than mineral-oil-based grease. Made with silica thickener, it has excellent heat and moisture resistance and good oxidation resistance. It is best for low-speed, high-torque gears and chain.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Each | |
Silica Thickener | ||||||||||
| 3 | Semisynthetic | Clay, PTFE | 14 oz. | Caulk Gun Cartridge | 50° to 350° | Nonmelting | White | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 0000000 | 000000 |
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Pkg. Qty. | Pkg. | |
Silica Thickener | |||||||||||
| 3 | Semisynthetic | Clay, PTFE | 14 oz. | Caulk Gun Cartridge | 50° to 350° | Nonmelting | White | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 12 | 0000000 | 0000000 |
Dry-Film Lubricants for Chain
A high load-carrying capacity makes these lubricants good for use on chain and moving metal parts. They dry to form a film that lubricates without attracting dust.
Lubricants with PTFE can be used with most plastics and are chemically inert.